[PATCH v2 2/4] arm64: dts: rockchip: add rk3328 display nodes

[Robin Murphy]

Hi Heiko,

Just a trivial nit I failed to consider last time...

On 15/05/18 14:54, Heiko Stuebner wrote:
> Add the chain of display nodes from the core display-subsystem
> through the one vop to the dw-hdmi output.
> 
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> Tested-by: Robin Murphy <robin.murphy at arm.com>
> ---
> changes in v2:
> - remove trailing 0 from vop irq
> 
>   arch/arm64/boot/dts/rockchip/rk3328.dtsi | 56 ++++++++++++++++++++++++
>   1 file changed, 56 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> index 04d81ea0924e..16e7cf210875 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> @@ -185,6 +185,11 @@
>   		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
>   	};
>   
> +	display_subsystem: display-subsystem {
> +		compatible = "rockchip,display-subsystem";
> +		ports = <&vop_out>;
> +	};
> +
>   	psci {
>   		compatible = "arm,psci-1.0", "arm,psci-0.2";
>   		method = "smc";
> @@ -634,6 +639,28 @@
>   		status = "disabled";
>   	};
>   
> +	vop: vop at ff370000 {
> +		compatible = "rockchip,rk3328-vop";
> +		reg = <0x0 0xff370000 0x0 0x3efc>;
> +		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru ACLK_VOP>, <&cru DCLK_LCDC>, <&cru HCLK_VOP>;
> +		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
> +		resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
> +		reset-names = "axi", "ahb", "dclk";
> +		iommus = <&vop_mmu>;
> +		status = "disabled";
> +
> +		vop_out: port {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			vop_out_hdmi: endpoint at 0 {
> +				reg = <0>;
> +				remote-endpoint = <&hdmi_in_vop>;
> +			};
> +		};
> +	};
> +
>   	vop_mmu: iommu at ff373f00 {
>   		compatible = "rockchip,iommu";
>   		reg = <0x0 0xff373f00 0x0 0x100>;
> @@ -645,6 +672,35 @@
>   		status = "disabled";
>   	};
>   
> +	hdmi: hdmi at ff3c0000 {
> +		compatible = "rockchip,rk3328-dw-hdmi";
> +		reg = <0x0 0xff3c0000 0x0 0x20000>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru PCLK_HDMI>,
> +			 <&cru SCLK_HDMI_SFC>;
> +		clock-names = "iahb",
> +			      "isfr";
> +		phys = <&hdmiphy>;
> +		phy-names = "hdmi";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
> +		rockchip,grf = <&grf>;
> +		status = "disabled";
> +
> +		ports {
> +			hdmi_in: port {
> +				#address-cells = <1>;
> +				#size-cells = <0>;

FWIW I think we could just drop these (along with the reg and unit 
address below), since with a single VOP instance I guess there can only 
ever be one remote endpoint here.

(I assume the VOP itself has a potential second endpoint at the video 
DAC, so there's some argument for explicit numbering there)

Robin.

> +				hdmi_in_vop: endpoint at 0 {
> +					reg = <0>;
> +					remote-endpoint = <&vop_out_hdmi>;
> +				};
> +			};
> +		};
> +	};
> +
>   	hdmiphy: phy at ff430000 {
>   		compatible = "rockchip,rk3328-hdmi-phy";
>   		reg = <0x0 0xff430000 0x0 0x10000>;
>