[PATCH v2 2/8] drm/rockchip/dsi: add dual mipi channel support

Mark yao mark.yao at rock-chips.com
Wed Sep 27 00:05:04 PDT 2017


On 2017年09月26日 15:55, Nickey Yang wrote:
> This patch add dual mipi channel support:
> 1.add definition of dsi1 register and grf operation.
> 2.dsi0 and dsi1 will work in master and slave mode
> when driving dual mipi panel.
>
> Signed-off-by: Nickey Yang <nickey.yang at rock-chips.com>

Hi Nickey
Can you rebase your patches to drm-misc-next, these patches would conflict to current drm-misc-next branch.

And please see my comment inline.

Mark Yao

> ---
>   drivers/gpu/drm/rockchip/dw-mipi-dsi.c      | 390 ++++++++++++++++++++--------
>   drivers/gpu/drm/rockchip/rockchip_drm_drv.h |   1 +
>   drivers/gpu/drm/rockchip/rockchip_drm_vop.c |   2 +
>   drivers/gpu/drm/rockchip/rockchip_drm_vop.h |   3 +
>   4 files changed, 292 insertions(+), 104 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> index c933a3a..191037c 100644
> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> @@ -39,8 +39,58 @@
>   #define RK3399_DSI1_SEL_VOP_LIT		BIT(4)
>   
>   /* disable turnrequest, turndisable, forcetxstopmode, forcerxmode */
> -#define RK3399_GRF_SOC_CON22		0x6258
> -#define RK3399_GRF_DSI_MODE		0xffff0000
> +#define RK3399_GRF_SOC_CON22			0x6258
> +#define DPHY_TX0_TURNREQUEST_SET		((0xf << 12) << 16)
> +#define DPHY_TX0_TURNREQUEST_DISABLE		(0x0 << 12)
> +#define DPHY_TX0_TURNREQUEST_ENABLE		(0xf << 12)
> +#define DPHY_TX0_TURNDISABLE_SET		((0xf << 8) << 16)
> +#define DPHY_TX0_TURNDISABLE_DISABLE		(0x0 << 8)
> +#define DPHY_TX0_TURNDISABLE_ENABLE		(0xf << 8)
> +#define DPHY_TX0_FORCETXSTOPMODE_SET		((0xf << 4) << 16)
> +#define DPHY_TX0_FORCETXSTOPMODE_DISABLE	(0x0 << 4)
> +#define DPHY_TX0_FORCETXSTOPMODE_ENABLE		(0xf << 4)
> +#define DPHY_TX0_FORCETRXMODE_SET		((0xf << 0) << 16)
> +#define DPHY_TX0_FORCETRXMODE_DISABLE		0x0
> +#define DPHY_TX0_FORCETRXMODE_ENABLE		0xf
> +#define RK3399_GRF_DSI_MODE			((DPHY_TX0_TURNREQUEST_SET | \
> +						 DPHY_TX0_TURNDISABLE_SET | \
> +						 DPHY_TX0_FORCETXSTOPMODE_SET | \
> +						 DPHY_TX0_FORCETRXMODE_SET) | \
> +						 (DPHY_TX0_TURNREQUEST_DISABLE | \
> +						 DPHY_TX0_TURNDISABLE_DISABLE | \
> +						 DPHY_TX0_FORCETXSTOPMODE_DISABLE | \
> +						 DPHY_TX0_FORCETRXMODE_DISABLE))
> +
> +
> +/* disable turndisable, forcetxstopmode, forcerxmode, enable */
> +#define RK3399_GRF_SOC_CON23			0x625c
> +#define DPHY_TX1RX1_TURNDISABLE_SET		((0xf << 12) << 16)
> +#define DPHY_TX1RX1_TURNDISABLE_DISABLE		(0x0 << 12)
> +#define DPHY_TX1RX1_TURNDISABLE_ENABLE		(0xf << 12)
> +#define DPHY_TX1RX1_FORCETXSTOPMODE_SET		((0xf << 8) << 16)
> +#define DPHY_TX1RX1_FORCETXSTOPMODE_DISABLE	(0x0 << 8)
> +#define DPHY_TX1RX1_FORCETXSTOPMODE_ENABLE	(0xf << 8)
> +#define DPHY_TX1RX1_FORCERXMODE_SET		((0xf << 4) << 16)
> +#define DPHY_TX1RX1_FORCERXMODE_DISABLE		(0x0 << 4)
> +#define DPHY_TX1RX1_FORCERXMODE_ENABLE		(0xf << 4)
> +#define DPHY_TX1RX1_ENABLE_SET			((0xf << 0) << 16)
> +#define DPHY_TX1RX1_ENABLE_DISABLE		0x0
> +#define DPHY_TX1RX1_ENABLE_ENABLE		0xf
> +#define RK3399_GRF_DSI1_MODE			((DPHY_TX1RX1_TURNDISABLE_SET | \
> +						 DPHY_TX1RX1_FORCETXSTOPMODE_SET | \
> +						 DPHY_TX1RX1_FORCERXMODE_SET | \
> +						 DPHY_TX1RX1_ENABLE_SET) | \
> +						 (DPHY_TX0_TURNREQUEST_DISABLE | \
> +						 DPHY_TX0_TURNDISABLE_DISABLE | \
> +						 DPHY_TX0_FORCETXSTOPMODE_DISABLE | \
> +						 DPHY_TX0_FORCETRXMODE_DISABLE))
> +#define RK3399_GRF_DSI1_ENABLE			((DPHY_TX1RX1_ENABLE_SET | \
> +						  DPHY_TX1RX1_ENABLE_ENABLE))
> +
> +#define RK3399_GRF_SOC_CON24		0x6260
> +#define RK3399_TXRX_MASTERSLAVEZ	BIT(7)
> +#define RK3399_TXRX_ENABLECLK		BIT(6)
> +#define RK3399_TXRX_BASEDIR		BIT(5)
>   
>   #define DSI_VERSION			0x00
>   #define DSI_PWR_UP			0x04
> @@ -304,6 +354,13 @@ struct dw_mipi_dsi_plat_data {
>   	u32 grf_switch_reg;
>   	u32 grf_dsi0_mode;
>   	u32 grf_dsi0_mode_reg;
> +	u32 grf_dsi1_mode;
> +	u32 grf_dsi1_enable;
> +	u32 grf_dsi1_mode_reg1;
> +	u32 dsi1_basedir;
> +	u32 dsi1_masterslavez;
> +	u32 dsi1_enableclk;
> +	u32 grf_dsi1_mode_reg2;
>   	unsigned int flags;
>   	unsigned int max_data_lanes;
>   };
> @@ -322,6 +379,10 @@ struct dw_mipi_dsi {
>   	struct clk *pclk;
>   	struct clk *phy_cfg_clk;
>   
> +	/* dual-channel */
> +	struct dw_mipi_dsi *master;
> +	struct dw_mipi_dsi *slave;
> +
>   	int dpms_mode;
>   	unsigned int lane_mbps; /* per lane */
>   	u32 channel;
> @@ -574,6 +635,7 @@ static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi,
>   	unsigned int max_mbps = dptdin_map[ARRAY_SIZE(dptdin_map) - 1].max_mbps;
>   	int bpp;
>   	unsigned long best_freq = 0;
> +	int lanes = dsi->lanes;
>   	unsigned long fvco_min, fvco_max, fin, fout;
>   	unsigned int min_prediv, max_prediv;
>   	unsigned int _prediv, uninitialized_var(best_prediv);
> @@ -587,10 +649,13 @@ static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi,
>   		return bpp;
>   	}
>   
> +	if (dsi->slave || dsi->master)
> +		lanes = dsi->lanes * 2;
> +
>   	mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC);
>   	if (mpclk) {
>   		/* take 1 / 0.8, since mbps must big than bandwidth of RGB */
> -		tmp = mpclk * (bpp / dsi->lanes) * 10 / 8;
> +		tmp = mpclk * (bpp / lanes) * 10 / 8;
>   		if (tmp < max_mbps)
>   			target_mbps = tmp;
>   		else
> @@ -653,17 +718,26 @@ static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
>   				   struct mipi_dsi_device *device)
>   {
>   	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +	int lanes = dsi->slave ? device->lanes / 2 : device->lanes;
>   
> -	if (device->lanes > dsi->pdata->max_data_lanes) {
> +	if (lanes > dsi->pdata->max_data_lanes) {
>   		dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
> -			device->lanes);
> +			lanes);
>   		return -EINVAL;
>   	}
>   
> -	dsi->lanes = device->lanes;
> +	dsi->lanes = lanes;
>   	dsi->channel = device->channel;
>   	dsi->format = device->format;
>   	dsi->mode_flags = device->mode_flags;
> +
> +	if (dsi->slave) {
> +		dsi->slave->lanes = lanes;
> +		dsi->slave->channel = device->channel;
> +		dsi->slave->format = device->format;
> +		dsi->slave->mode_flags = device->mode_flags;
> +	}
> +
>   	dsi->panel = of_drm_find_panel(device->dev.of_node);
>   	if (dsi->panel)
>   		return drm_panel_attach(dsi->panel, &dsi->connector);
> @@ -793,15 +867,22 @@ static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
>   	int ret;
>   
>   	dw_mipi_message_config(dsi, msg);
> +	if (dsi->slave)
> +		dw_mipi_message_config(dsi->slave, msg);
>   
>   	switch (msg->type) {
>   	case MIPI_DSI_DCS_SHORT_WRITE:
>   	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
>   	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
> +	case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
>   		ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
> +		if (dsi->slave)
> +			ret = dw_mipi_dsi_dcs_short_write(dsi->slave, msg);
>   		break;
>   	case MIPI_DSI_DCS_LONG_WRITE:
>   		ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
> +		if (dsi->slave)
> +			ret = dw_mipi_dsi_dcs_long_write(dsi->slave, msg);
>   		break;
>   	default:
>   		dev_err(dsi->dev, "unsupported message type 0x%02x\n",
> @@ -875,6 +956,55 @@ static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
>   		  TX_ESC_CLK_DIVIDSION(esc_clk_division));
>   }
>   
> +static void rockchip_dsi_grf_config(struct dw_mipi_dsi *dsi, int vop_id)
> +{
> +	const struct dw_mipi_dsi_plat_data *pdata = dsi->pdata;
> +	int val = 0;
> +	int ret;
> +
> +	/*
> +	 * For the RK3399, the clk of grf must be enabled before writing grf
> +	 * register. And for RK3288 or other soc, this grf_clk must be NULL,
> +	 * the clk_prepare_enable return true directly.
> +	 */
> +	ret = clk_prepare_enable(dsi->grf_clk);
> +	if (ret) {
> +		dev_err(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
> +		return;
> +	}
> +
> +	val = pdata->dsi0_en_bit << 16;
> +	if (dsi->slave)
> +		val |= pdata->dsi1_en_bit << 16;
> +	if (vop_id) {
> +		val |= pdata->dsi0_en_bit;
> +		if (dsi->slave)
> +			val |= pdata->dsi1_en_bit;
> +	}
> +	regmap_write(dsi->grf_regmap, pdata->grf_switch_reg, val);
> +
> +	if (pdata->grf_dsi0_mode_reg)
> +		regmap_write(dsi->grf_regmap, pdata->grf_dsi0_mode_reg,
> +			     pdata->grf_dsi0_mode);
> +
> +	if (dsi->slave) {
> +		if (pdata->grf_dsi1_mode_reg1)
> +			regmap_write(dsi->grf_regmap, pdata->grf_dsi1_mode_reg1,
> +				     pdata->grf_dsi1_mode);
> +		val = pdata->dsi1_masterslavez |
> +		      (pdata->dsi1_masterslavez << 16) |
> +		      (pdata->dsi1_basedir << 16);
> +		if (pdata->grf_dsi1_mode_reg2)
> +			regmap_write(dsi->grf_regmap, pdata->grf_dsi1_mode_reg2,
> +				     val);
> +		if (pdata->grf_dsi1_mode_reg1)
> +			regmap_write(dsi->grf_regmap, pdata->grf_dsi1_mode_reg1,
> +				     pdata->grf_dsi1_enable);
> +	}
> +
> +	clk_disable_unprepare(dsi->grf_clk);
> +}
> +
>   static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
>   				   struct drm_display_mode *mode)
>   {
> @@ -915,7 +1045,14 @@ static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
>   static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
>   					    struct drm_display_mode *mode)
>   {
> -	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
> +	int pkt_size;
> +
> +	if (dsi->slave || dsi->master)
> +		pkt_size = VID_PKT_SIZE(mode->hdisplay / 2);
> +	else
> +		pkt_size = VID_PKT_SIZE(mode->hdisplay);
> +
> +	dsi_write(dsi, DSI_VID_PKT_SIZE, pkt_size);
>   }
>   
>   static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
> @@ -1020,24 +1157,26 @@ static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
>   	dw_mipi_dsi_disable(dsi);
>   	pm_runtime_put(dsi->dev);
>   	clk_disable_unprepare(dsi->pclk);
> +
> +	if (dsi->slave) {
> +		if (clk_prepare_enable(dsi->slave->pclk)) {
> +			dev_err(dsi->slave->dev, "%s: Failed to enable pclk\n", __func__);

line over 80 characters

> +			return;
> +		}
> +		dw_mipi_dsi_disable(dsi->slave);
> +		pm_runtime_put(dsi->slave->dev);
> +		clk_disable_unprepare(dsi->slave->pclk);
> +	}
> +
>   	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
>   }
>   
> -static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
> +static void dw_mipi_dsi_enable(struct dw_mipi_dsi *dsi, struct drm_display_mode *mode)
>   {
> -	struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
> -	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
> -	const struct dw_mipi_dsi_plat_data *pdata = dsi->pdata;
> -	int mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, encoder);
> -	u32 val;
> -	int ret;
> -
> -	ret = dw_mipi_dsi_get_lane_bps(dsi, mode);
> -	if (ret < 0)
> -		return;
> -
> -	if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
> +	if (dw_mipi_dsi_get_lane_bps(dsi, mode) < 0) {
> +		dev_err(dsi->dev, "%s: Failed to get lane bps\n", __func__);
>   		return;
> +	}
>   
>   	if (clk_prepare_enable(dsi->pclk)) {
>   		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> @@ -1057,43 +1196,42 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
>   	dw_mipi_dsi_dphy_interface_config(dsi);
>   	dw_mipi_dsi_clear_err(dsi);
>   
> -	/*
> -	 * For the RK3399, the clk of grf must be enabled before writing grf
> -	 * register. And for RK3288 or other soc, this grf_clk must be NULL,
> -	 * the clk_prepare_enable return true directly.
> -	 */
> -	ret = clk_prepare_enable(dsi->grf_clk);
> -	if (ret) {
> -		dev_err(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
> -		return;
> -	}
> -
> -	if (pdata->grf_dsi0_mode_reg)
> -		regmap_write(dsi->grf_regmap, pdata->grf_dsi0_mode_reg,
> -			     pdata->grf_dsi0_mode);
> -
>   	dw_mipi_dsi_phy_init(dsi);
>   	dw_mipi_dsi_wait_for_two_frames(mode);
>   
>   	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> +}
> +
> +static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
> +{
> +	struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
> +	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
> +	int mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, encoder);
> +
> +	if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
> +		return;
> +
> +	rockchip_dsi_grf_config(dsi, mux);
> +	dev_dbg(dsi->dev, "vop %s output to dsi0\n", (mux) ? "LIT" : "BIG");
> +
> +	dw_mipi_dsi_enable(dsi, mode);
> +	if (dsi->slave)
> +		dw_mipi_dsi_enable(dsi->slave, mode);
> +
>   	if (drm_panel_prepare(dsi->panel))
>   		dev_err(dsi->dev, "failed to prepare panel\n");
>   
>   	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
> +	if (dsi->slave)
> +		dw_mipi_dsi_set_mode(dsi->slave, DW_MIPI_DSI_VID_MODE);
> +
>   	drm_panel_enable(dsi->panel);
>   
>   	clk_disable_unprepare(dsi->pclk);
> +	if (dsi->slave)
> +		clk_disable_unprepare(dsi->slave->pclk);
>   
> -	if (mux)
> -		val = pdata->dsi0_en_bit | (pdata->dsi0_en_bit << 16);
> -	else
> -		val = pdata->dsi0_en_bit << 16;
> -
> -	regmap_write(dsi->grf_regmap, pdata->grf_switch_reg, val);
> -	dev_dbg(dsi->dev, "vop %s output to dsi0\n", (mux) ? "LIT" : "BIG");
>   	dsi->dpms_mode = DRM_MODE_DPMS_ON;
> -
> -	clk_disable_unprepare(dsi->grf_clk);
>   }
>   
>   static int
> @@ -1121,6 +1259,9 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
>   
>   	s->output_type = DRM_MODE_CONNECTOR_DSI;
>   
> +	if (dsi->slave)
> +		s->output_flags = ROCKCHIP_OUTPUT_DSI_DUAL_CHANNEL;
> +
>   	return 0;
>   }
>   
> @@ -1226,6 +1367,13 @@ static int rockchip_mipi_parse_dt(struct dw_mipi_dsi *dsi)
>   	.grf_switch_reg = RK3399_GRF_SOC_CON20,
>   	.grf_dsi0_mode = RK3399_GRF_DSI_MODE,
>   	.grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22,
> +	.grf_dsi1_mode = RK3399_GRF_DSI1_MODE,
> +	.grf_dsi1_enable = RK3399_GRF_DSI1_ENABLE,
> +	.grf_dsi1_mode_reg1 = RK3399_GRF_SOC_CON23,
> +	.dsi1_basedir = RK3399_TXRX_BASEDIR,
> +	.dsi1_masterslavez = RK3399_TXRX_MASTERSLAVEZ,
> +	.dsi1_enableclk = RK3399_TXRX_ENABLECLK,
> +	.grf_dsi1_mode_reg2 = RK3399_GRF_SOC_CON24,
>   	.flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK,
>   	.max_data_lanes = 4,
>   };
> @@ -1242,17 +1390,107 @@ static int rockchip_mipi_parse_dt(struct dw_mipi_dsi *dsi)
>   };
>   MODULE_DEVICE_TABLE(of, dw_mipi_dsi_dt_ids);
>   
> +
> +static int rockchip_dsi_dual_channel_probe(struct dw_mipi_dsi *dsi)
> +{
> +	struct device_node *np;
> +	struct platform_device *secondary;
> +
> +	np = of_parse_phandle(dsi->dev->of_node, "rockchip,dual-channel", 0);
> +	if (np) {
> +		secondary = of_find_device_by_node(np);
> +		dsi->slave = platform_get_drvdata(secondary);
> +		of_node_put(np);
> +
> +		if (!dsi->slave)
> +			return -EPROBE_DEFER;
> +
> +		dsi->slave->master = dsi;
> +	}
> +
> +	return 0;
> +}
> +
>   static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
>   			    void *data)
>   {
> +	struct drm_device *drm = data;
> +	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = rockchip_dsi_dual_channel_probe(dsi);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_prepare_enable(dsi->pllref_clk);
> +	if (ret) {
> +		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
> +		return ret;
> +	}
> +
> +	pm_runtime_enable(dev);
> +
> +	if (dsi->master)
> +		return 0;
> +
> +	ret = dw_mipi_dsi_register(drm, dsi);
> +	if (ret) {
> +		dev_err(dev, "Failed to register mipi_dsi: %d\n", ret);
> +		goto err_pllref;
> +	}
> +
> +	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
> +	dsi->dsi_host.dev = dev;
> +	ret = mipi_dsi_host_register(&dsi->dsi_host);
> +	if (ret) {
> +		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
> +		goto err_cleanup;
> +	}
> +
> +	if (!dsi->panel) {
> +		ret = -EPROBE_DEFER;
> +		goto err_mipi_dsi_host;
> +	}
> +
> +	return 0;
> +
> +err_mipi_dsi_host:
> +	mipi_dsi_host_unregister(&dsi->dsi_host);
> +err_cleanup:
> +	drm_encoder_cleanup(&dsi->encoder);
> +	drm_connector_cleanup(&dsi->connector);
> +err_pllref:
> +	pm_runtime_disable(dev);
> +	clk_disable_unprepare(dsi->pllref_clk);
> +	return ret;
> +}
> +
> +static void dw_mipi_dsi_unbind(struct device *dev, struct device *master,
> +			       void *data)
> +{
> +	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
> +
> +	mipi_dsi_host_unregister(&dsi->dsi_host);
> +	pm_runtime_disable(dev);
> +	if (dsi->slave)
> +		pm_runtime_disable(dsi->slave->dev);
> +	clk_disable_unprepare(dsi->pllref_clk);

I don't understand the master/slave mipi dsi bind/unbind.  Does master/slave both would call bind/unbind?
why we need do slave pm_runtime_disable here? The bind/unbind seem not in pairs.

> +}
> +
> +static const struct component_ops dw_mipi_dsi_ops = {
> +	.bind	= dw_mipi_dsi_bind,
> +	.unbind	= dw_mipi_dsi_unbind,
> +};
> +
> +static int dw_mipi_dsi_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
>   	const struct of_device_id *of_id =
>   			of_match_device(dw_mipi_dsi_dt_ids, dev);
>   	const struct dw_mipi_dsi_plat_data *pdata = of_id->data;
> -	struct platform_device *pdev = to_platform_device(dev);
> -	struct reset_control *apb_rst;
> -	struct drm_device *drm = data;
>   	struct dw_mipi_dsi *dsi;
>   	struct resource *res;
> +	struct reset_control *apb_rst;
>   	int ret;
>   
>   	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
> @@ -1262,6 +1500,7 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
>   	dsi->dev = dev;
>   	dsi->pdata = pdata;
>   	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
> +	dev_set_drvdata(dev, dsi);
>   
>   	ret = rockchip_mipi_parse_dt(dsi);
>   	if (ret)
> @@ -1336,63 +1575,6 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
>   		}
>   	}
>   
> -	ret = clk_prepare_enable(dsi->pllref_clk);
> -	if (ret) {
> -		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
> -		return ret;
> -	}
> -
> -	ret = dw_mipi_dsi_register(drm, dsi);
> -	if (ret) {
> -		dev_err(dev, "Failed to register mipi_dsi: %d\n", ret);
> -		goto err_pllref;
> -	}
> -
> -	pm_runtime_enable(dev);
> -
> -	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
> -	dsi->dsi_host.dev = dev;
> -	ret = mipi_dsi_host_register(&dsi->dsi_host);
> -	if (ret) {
> -		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
> -		goto err_cleanup;
> -	}
> -
> -	if (!dsi->panel) {
> -		ret = -EPROBE_DEFER;
> -		goto err_mipi_dsi_host;
> -	}
> -
> -	dev_set_drvdata(dev, dsi);
> -	return 0;
> -
> -err_mipi_dsi_host:
> -	mipi_dsi_host_unregister(&dsi->dsi_host);
> -err_cleanup:
> -	drm_encoder_cleanup(&dsi->encoder);
> -	drm_connector_cleanup(&dsi->connector);
> -err_pllref:
> -	clk_disable_unprepare(dsi->pllref_clk);
> -	return ret;
> -}
> -
> -static void dw_mipi_dsi_unbind(struct device *dev, struct device *master,
> -			       void *data)
> -{
> -	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
> -
> -	mipi_dsi_host_unregister(&dsi->dsi_host);
> -	pm_runtime_disable(dev);
> -	clk_disable_unprepare(dsi->pllref_clk);
> -}
> -
> -static const struct component_ops dw_mipi_dsi_ops = {
> -	.bind	= dw_mipi_dsi_bind,
> -	.unbind	= dw_mipi_dsi_unbind,
> -};
> -
> -static int dw_mipi_dsi_probe(struct platform_device *pdev)
> -{
>   	return component_add(&pdev->dev, &dw_mipi_dsi_ops);
>   }
>   
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
> index c7e96b8..51ad1c2 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h
> @@ -36,6 +36,7 @@ struct rockchip_crtc_state {
>   	struct drm_crtc_state base;
>   	int output_type;
>   	int output_mode;
> +	int output_flags;
>   };
>   #define to_rockchip_crtc_state(s) \
>   		container_of(s, struct rockchip_crtc_state, base)
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> index bf9ed0e..cb40cdd 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> @@ -917,6 +917,8 @@ static void vop_crtc_atomic_enable(struct drm_crtc *crtc,
>   	case DRM_MODE_CONNECTOR_DSI:
>   		VOP_REG_SET(vop, output, mipi_pin_pol, pin_pol);
>   		VOP_REG_SET(vop, output, mipi_en, 1);
> +		VOP_REG_SET(vop, output, mipi_dual_channel_en,
> +			!!(s->output_flags & ROCKCHIP_OUTPUT_DSI_DUAL_CHANNEL));
>   		break;
>   	case DRM_MODE_CONNECTOR_DisplayPort:
>   		pin_pol &= ~BIT(DCLK_INVERT);
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
> index 56bbd2e..d184531 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
> @@ -60,6 +60,7 @@ struct vop_output {
>   	struct vop_reg edp_en;
>   	struct vop_reg hdmi_en;
>   	struct vop_reg mipi_en;
> +	struct vop_reg mipi_dual_channel_en;

I think you miss add mipi_dual_channel_en to drivers/gpu/drm/rockchip/rockchip_vop_reg.c.

>   	struct vop_reg rgb_en;
>   };
>   
> @@ -212,6 +213,8 @@ struct vop_data {
>   /* for use special outface */
>   #define ROCKCHIP_OUT_MODE_AAAA	15
>   
> +#define ROCKCHIP_OUTPUT_DSI_DUAL_CHANNEL	BIT(0)
> +
>   enum alpha_mode {
>   	ALPHA_STRAIGHT,
>   	ALPHA_INVERSE,




More information about the Linux-rockchip mailing list