[PATCH 2/2] pinctrl: rockchip: Fix the correct routing config for the gmac-m1 pins of rmii and rgmii

[Heiko Stuebner]

Hi Linus,

Am Samstag, 7. Oktober 2017, 12:32:51 CEST schrieb Linus Walleij:
> On Sat, Sep 30, 2017 at 5:07 PM, Heiko Stuebner <heiko at sntech.de> wrote:
> > Am Samstag, 30. September 2017, 20:13:21 CEST schrieb David Wu:
> >> If the gmac-m1 optimization(bit10) is selected, the gpio function
> >> of gmac pins is not valid. We may use the rmii mode for gmac interface,
> >> the pins such as rx_d2, rx_d3, which the rgmii mode used, but rmii not
> >> used could be taken as gpio function. So gmac_rxd0m1 selects the bit2,
> >> and gmac_rxd0m3 select bit10 is more correct.
> >>
> >> Signed-off-by: David Wu <david.wu at rock-chips.com>
> >
> > the patch subject should mention the the rk3328 whose routing gets fixed
> > (like adding a simple "on rk3328" to it), otherwise
> >
> > Reviewed-by: Heiko Stuebner <heiko at sntech.de>
> 
> I added rk3328 to it, also assumed this Reviewed-by covers patch 1/2
> as well and applied both with your tag.

while I did mean to cross-check patch 1/2 separately with the soc manual,
I got sidetracked with my current vacation :-) . Anyway, it did look ok on
first glance then and I also cannot find issues with it now. So all is good.


Heiko