[PATCH v2 2/3] dt-bindings: add bindings for rk3128 clock controller

[Heiko Stuebner]

Hi Elaine,

Am Donnerstag, 18. Mai 2017, 10:16:58 CEST schrieb Elaine Zhang:
> Add devicetree bindings for Rockchip cru which found on
> Rockchip SoCs.
> 
> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
> ---
>  .../bindings/clock/rockchip,rk3128-cru.txt         | 56 ++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
> new file mode 100644
> index 000000000000..455a9a00a623
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
> @@ -0,0 +1,56 @@
> +* Rockchip RK3128 Clock and Reset Unit
> +
> +The RK3128 clock controller generates and supplies clock to various
> +controllers within the SoC and also implements a reset controller for SoC
> +peripherals.
> +
> +Required Properties:
> +
> +- compatible: should be "rockchip,rk3128-cru"
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- #clock-cells: should be 1.
> +- #reset-cells: should be 1.
> +
> +Optional Properties:
> +
> +- rockchip,grf: phandle to the syscon managing the "general register files"
> +  If missing pll rates are not changeable, due to the missing pll lock status.
> +
> +Each clock is assigned an identifier and client nodes can use this identifier
> +to specify the clock which they consume. All available clocks are defined as
> +preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
> +used in device tree sources. Similar macros exist for the reset sources in
> +these files.
> +
> +External clocks:
> +
> +There are several clocks that are generated outside the SoC. It is expected
> +that they are defined using standard clock bindings with following
> +clock-output-names:
> + - "xin24m" - crystal input - required,
> + - "ext_i2s" - external I2S clock - optional,
> + - "gmac_clkin" - external GMAC clock - optional

missing usb480m_phy as external clock, that comes back from the usbphy block.


Otherwise looks good
Heiko