[PATCH v2 1/2] pinctrl: rockchip:Add input schmitt support
Kever Yang
kever.yang at rock-chips.com
Thu Mar 2 00:30:11 PST 2017
Hi David,
On 03/02/2017 03:11 PM, David Wu wrote:
> From: "david.wu" <david.wu at rock-chips.com>
You do not need to add this when you send mail for yourself,
it's need when you send mail for others.
>
> To prevent external signal crosstalk, some pins need to
> enable input schmitt, like i2c pins, 32k-input pin and so on.
>
> Signed-off-by: david.wu <david.wu at rock-chips.com>
Better to use "David Wu" for full name, you can correct this in your
gitconfig file.
Thanks,
- Kever
> ---
> changes in v2:
> - check the return value (Heiko)
>
> drivers/pinctrl/pinctrl-rockchip.c | 73 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 73 insertions(+)
>
> diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
> index a20ce9f..9b8d516 100644
> --- a/drivers/pinctrl/pinctrl-rockchip.c
> +++ b/drivers/pinctrl/pinctrl-rockchip.c
> @@ -308,6 +308,9 @@ struct rockchip_pin_ctrl {
> int *reg, u8 *bit);
> void (*iomux_recalc)(u8 bank_num, int pin, int *reg,
> u8 *bit, int *mask);
> + int (*schmitt_calc_reg)(struct rockchip_pin_bank *bank,
> + int pin_num, struct regmap **regmap,
> + int *reg, u8 *bit);
> };
>
> struct rockchip_pin_config {
> @@ -1355,6 +1358,57 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
> return ret;
> }
>
> +static int rockchip_get_schmitt(struct rockchip_pin_bank *bank, int pin_num)
> +{
> + struct rockchip_pinctrl *info = bank->drvdata;
> + struct rockchip_pin_ctrl *ctrl = info->ctrl;
> + struct regmap *regmap;
> + int reg, ret;
> + u8 bit;
> + u32 data;
> +
> + ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(regmap, reg, &data);
> + if (ret)
> + return ret;
> +
> + data >>= bit;
> + return data & 0x1;
> +}
> +
> +static int rockchip_set_schmitt(struct rockchip_pin_bank *bank,
> + int pin_num, int enable)
> +{
> + struct rockchip_pinctrl *info = bank->drvdata;
> + struct rockchip_pin_ctrl *ctrl = info->ctrl;
> + struct regmap *regmap;
> + int reg, ret;
> + unsigned long flags;
> + u8 bit;
> + u32 data, rmask;
> +
> + dev_dbg(info->dev, "setting input schmitt of GPIO%d-%d to %d\n",
> + bank->bank_num, pin_num, enable);
> +
> + ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit);
> + if (ret)
> + return ret;
> +
> + spin_lock_irqsave(&bank->slock, flags);
> +
> + /* enable the write to the equivalent lower bits */
> + data = BIT(bit + 16) | (enable << bit);
> + rmask = BIT(bit + 16) | BIT(bit);
> +
> + ret = regmap_update_bits(regmap, reg, rmask, data);
> + spin_unlock_irqrestore(&bank->slock, flags);
> +
> + return ret;
> +}
> +
> /*
> * Pinmux_ops handling
> */
> @@ -1574,6 +1628,15 @@ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
> if (rc < 0)
> return rc;
> break;
> + case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
> + if (!info->ctrl->schmitt_calc_reg)
> + return -ENOTSUPP;
> +
> + rc = rockchip_set_schmitt(bank,
> + pin - bank->pin_base, arg);
> + if (rc < 0)
> + return rc;
> + break;
> default:
> return -ENOTSUPP;
> break;
> @@ -1634,6 +1697,16 @@ static int rockchip_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
>
> arg = rc;
> break;
> + case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
> + if (!info->ctrl->schmitt_calc_reg)
> + return -ENOTSUPP;
> +
> + rc = rockchip_get_schmitt(bank, pin - bank->pin_base);
> + if (rc < 0)
> + return rc;
> +
> + arg = rc;
> + break;
> default:
> return -ENOTSUPP;
> break;
More information about the Linux-rockchip
mailing list