[PATCH v2 1/5] drm/rockchip: vop: get rid of register init table
Sean Paul
seanpaul at chromium.org
Wed Jul 12 09:47:58 PDT 2017
On Wed, Jul 12, 2017 at 10:03:27AM +0800, Mark Yao wrote:
> Register init table use un-document define, it is unreadable,
> And sometimes we only want to update tiny bits, init table
> method is not friendly, it's diffcult to reuse for difference
> chips.
While I'm happy to see the init_table removed, it seems like the new code is not
equivalent to the old (ie: some register writes have been dropped). How did you
ensure that you're not breaking existing boards that depend on the deleted register
initialization?
Sean
>
> Signed-off-by: Mark Yao <mark.yao at rock-chips.com>
> ---
> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 6 ++--
> drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 10 ++-----
> drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 43 +++--------------------------
> 3 files changed, 10 insertions(+), 49 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> index 45589d6..7a5f809 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> @@ -1393,7 +1393,6 @@ static void vop_destroy_crtc(struct vop *vop)
> static int vop_initial(struct vop *vop)
> {
> const struct vop_data *vop_data = vop->data;
> - const struct vop_reg_data *init_table = vop_data->init_table;
> struct reset_control *ahb_rst;
> int i, ret;
>
> @@ -1453,13 +1452,14 @@ static int vop_initial(struct vop *vop)
>
> memcpy(vop->regsbak, vop->regs, vop->len);
>
> - for (i = 0; i < vop_data->table_size; i++)
> - vop_writel(vop, init_table[i].offset, init_table[i].value);
> + VOP_CTRL_SET(vop, global_regdone_en, 1);
> + VOP_CTRL_SET(vop, dsp_blank, 0);
>
> for (i = 0; i < vop_data->win_size; i++) {
> const struct vop_win_data *win = &vop_data->win[i];
>
> VOP_WIN_SET(vop, win, enable, 0);
> + VOP_WIN_SET(vop, win, gate, 1);
> }
>
> vop_cfg_done(vop);
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
> index 9979fd0..084d3b2 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
> @@ -24,11 +24,6 @@ enum vop_data_format {
> VOP_FMT_YUV444SP,
> };
>
> -struct vop_reg_data {
> - uint32_t offset;
> - uint32_t value;
> -};
> -
> struct vop_reg {
> uint32_t offset;
> uint32_t shift;
> @@ -46,6 +41,7 @@ struct vop_ctrl {
> struct vop_reg hdmi_en;
> struct vop_reg mipi_en;
> struct vop_reg dp_en;
> + struct vop_reg dsp_blank;
> struct vop_reg out_mode;
> struct vop_reg dither_down;
> struct vop_reg dither_up;
> @@ -65,6 +61,7 @@ struct vop_ctrl {
>
> struct vop_reg line_flag_num[2];
>
> + struct vop_reg global_regdone_en;
> struct vop_reg cfg_done;
> };
>
> @@ -115,6 +112,7 @@ struct vop_win_phy {
> uint32_t nformats;
>
> struct vop_reg enable;
> + struct vop_reg gate;
> struct vop_reg format;
> struct vop_reg rb_swap;
> struct vop_reg act_info;
> @@ -136,8 +134,6 @@ struct vop_win_data {
> };
>
> struct vop_data {
> - const struct vop_reg_data *init_table;
> - unsigned int table_size;
> const struct vop_ctrl *ctrl;
> const struct vop_intr *intr;
> const struct vop_win_data *win;
> diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
> index bafd698..00e9d79 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
> @@ -127,13 +127,7 @@
> .cfg_done = VOP_REG(RK3036_REG_CFG_DONE, 0x1, 0),
> };
>
> -static const struct vop_reg_data rk3036_vop_init_reg_table[] = {
> - {RK3036_DSP_CTRL1, 0x00000000},
> -};
> -
> static const struct vop_data rk3036_vop = {
> - .init_table = rk3036_vop_init_reg_table,
> - .table_size = ARRAY_SIZE(rk3036_vop_init_reg_table),
> .ctrl = &rk3036_ctrl_data,
> .intr = &rk3036_intr,
> .win = rk3036_vop_win_data,
> @@ -193,7 +187,8 @@
> static const struct vop_win_phy rk3288_win23_data = {
> .data_formats = formats_win_lite,
> .nformats = ARRAY_SIZE(formats_win_lite),
> - .enable = VOP_REG(RK3288_WIN2_CTRL0, 0x1, 0),
> + .enable = VOP_REG(RK3288_WIN2_CTRL0, 0x1, 4),
> + .gate = VOP_REG(RK3288_WIN2_CTRL0, 0x1, 0),
> .format = VOP_REG(RK3288_WIN2_CTRL0, 0x7, 1),
> .rb_swap = VOP_REG(RK3288_WIN2_CTRL0, 0x1, 12),
> .dsp_info = VOP_REG(RK3288_WIN2_DSP_INFO0, 0x0fff0fff, 0),
> @@ -215,6 +210,7 @@
> .dither_down = VOP_REG(RK3288_DSP_CTRL1, 0xf, 1),
> .dither_up = VOP_REG(RK3288_DSP_CTRL1, 0x1, 6),
> .data_blank = VOP_REG(RK3288_DSP_CTRL0, 0x1, 19),
> + .dsp_blank = VOP_REG(RK3288_DSP_CTRL0, 0x3, 18),
> .out_mode = VOP_REG(RK3288_DSP_CTRL0, 0xf, 0),
> .pin_pol = VOP_REG(RK3288_DSP_CTRL0, 0xf, 4),
> .htotal_pw = VOP_REG(RK3288_DSP_HTOTAL_HS_END, 0x1fff1fff, 0),
> @@ -224,22 +220,10 @@
> .hpost_st_end = VOP_REG(RK3288_POST_DSP_HACT_INFO, 0x1fff1fff, 0),
> .vpost_st_end = VOP_REG(RK3288_POST_DSP_VACT_INFO, 0x1fff1fff, 0),
> .line_flag_num[0] = VOP_REG(RK3288_INTR_CTRL0, 0x1fff, 12),
> + .global_regdone_en = VOP_REG(RK3288_SYS_CTRL, 0x1, 11),
> .cfg_done = VOP_REG(RK3288_REG_CFG_DONE, 0x1, 0),
> };
>
> -static const struct vop_reg_data rk3288_init_reg_table[] = {
> - {RK3288_SYS_CTRL, 0x00c00000},
> - {RK3288_DSP_CTRL0, 0x00000000},
> - {RK3288_WIN0_CTRL0, 0x00000080},
> - {RK3288_WIN1_CTRL0, 0x00000080},
> - /* TODO: Win2/3 support multiple area function, but we haven't found
> - * a suitable way to use it yet, so let's just use them as other windows
> - * with only area 0 enabled.
> - */
> - {RK3288_WIN2_CTRL0, 0x00000010},
> - {RK3288_WIN3_CTRL0, 0x00000010},
> -};
> -
> /*
> * Note: rk3288 has a dedicated 'cursor' window, however, that window requires
> * special support to get alpha blending working. For now, just use overlay
> @@ -273,8 +257,6 @@
> };
>
> static const struct vop_data rk3288_vop = {
> - .init_table = rk3288_init_reg_table,
> - .table_size = ARRAY_SIZE(rk3288_init_reg_table),
> .feature = VOP_FEATURE_OUTPUT_RGB10,
> .intr = &rk3288_vop_intr,
> .ctrl = &rk3288_ctrl_data,
> @@ -328,22 +310,7 @@
> .clear = VOP_REG_MASK(RK3399_INTR_CLEAR0, 0xffff, 0),
> };
>
> -static const struct vop_reg_data rk3399_init_reg_table[] = {
> - {RK3399_SYS_CTRL, 0x2000f800},
> - {RK3399_DSP_CTRL0, 0x00000000},
> - {RK3399_WIN0_CTRL0, 0x00000080},
> - {RK3399_WIN1_CTRL0, 0x00000080},
> - /* TODO: Win2/3 support multiple area function, but we haven't found
> - * a suitable way to use it yet, so let's just use them as other windows
> - * with only area 0 enabled.
> - */
> - {RK3399_WIN2_CTRL0, 0x00000010},
> - {RK3399_WIN3_CTRL0, 0x00000010},
> -};
> -
> static const struct vop_data rk3399_vop_big = {
> - .init_table = rk3399_init_reg_table,
> - .table_size = ARRAY_SIZE(rk3399_init_reg_table),
> .feature = VOP_FEATURE_OUTPUT_RGB10,
> .intr = &rk3399_vop_intr,
> .ctrl = &rk3399_ctrl_data,
> @@ -362,8 +329,6 @@
> };
>
> static const struct vop_data rk3399_vop_lit = {
> - .init_table = rk3399_init_reg_table,
> - .table_size = ARRAY_SIZE(rk3399_init_reg_table),
> .intr = &rk3399_vop_intr,
> .ctrl = &rk3399_ctrl_data,
> /*
> --
> 1.9.1
>
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Sean Paul, Software Engineer, Google / Chromium OS
More information about the Linux-rockchip
mailing list