[PATCH 4/4] arm64: dts: rockchip: update the thermal zones for RK3399 SoCs

[Caesar Wang]

As RK3399 had used the Power allocator thermal governor by default,
enabled this to manage thermals by dynamically allocating and limiting
power to devices.

Also, this patch supported the dynamic-power-coefficient/sustainable_power
and GPU's power model for needed parameters with thermal IPA.

Signed-off-by: Caesar Wang <wxt at rock-chips.com>

---

 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 62 +++++++++++++++-----------------
 1 file changed, 29 insertions(+), 33 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 8c6438b..139f58c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -147,7 +147,7 @@
 			enable-method = "psci";
 			#cooling-cells = <2>; /* min followed by max */
 			clocks = <&cru ARMCLKB>;
-			dynamic-power-coefficient = <100>;
+			dynamic-power-coefficient = <436>;
 		};
 
 		cpu_b1: cpu at 101 {
@@ -156,7 +156,7 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLKB>;
-			dynamic-power-coefficient = <100>;
+			dynamic-power-coefficient = <436>;
 		};
 	};
 
@@ -690,24 +690,25 @@
 	};
 
 	thermal_zones: thermal-zones {
-		cpu_thermal: cpu {
+		soc_thermal: soc-thermal {
 			polling-delay-passive = <100>;
 			polling-delay = <1000>;
+			sustainable-power = <1000>;
 
 			thermal-sensors = <&tsadc 0>;
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				threshold: trip-point at 0 {
 					temperature = <70000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
-				cpu_alert1: cpu_alert1 {
-					temperature = <75000>;
+				target: trip-point at 1 {
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
-				cpu_crit: cpu_crit {
+				soc_crit: soc-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -716,45 +717,31 @@
 
 			cooling-maps {
 				map0 {
-					trip = <&cpu_alert0>;
+					trip = <&target>;
 					cooling-device =
-						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+						<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
 				};
 				map1 {
-					trip = <&cpu_alert1>;
+					trip = <&target>;
 					cooling-device =
-						<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <1024>;
+				};
+				map2 {
+					trip = <&target>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
 				};
 			};
 		};
 
-		gpu_thermal: gpu {
+		gpu_thermal: gpu-thermal {
 			polling-delay-passive = <100>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsadc 1>;
-
-			trips {
-				gpu_alert0: gpu_alert0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				gpu_crit: gpu_crit {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&gpu_alert0>;
-					cooling-device =
-						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
 		};
 	};
 
@@ -1455,8 +1442,17 @@
 		interrupt-names = "GPU", "JOB", "MMU";
 		clocks = <&cru ACLK_GPU>;
 		clock-names = "clk_mali";
+		#cooling-cells = <2>;
 		power-domains = <&power RK3399_PD_GPU>;
 		status = "disabled";
+
+		gpu_power_model: power_model {
+			compatible = "arm,mali-simple-power-model";
+			static-coefficient = <1079403>;
+			dynamic-coefficient = <977>;
+			ts = <32000 4700 (-80) 2>;
+			thermal-zone = "gpu-thermal";
+		};
 	};
 
 	pinctrl: pinctrl {
-- 
2.7.4