[PATCH v5 8/8] clocksource/drivers/rockchip_timer: implement clocksource timer

[Daniel Lezcano]

On Tue, Jan 24, 2017 at 03:16:43PM +0300, Alexander Kochetkov wrote:
> The clock supplying the arm-global-timer on the rk3188 is coming from the
> the cpu clock itself and thus changes its rate everytime cpufreq adjusts
> the cpu frequency making this timer unsuitable as a stable clocksource
> and sched clock.
> 
> The rk3188, rk3288 and following socs share a separate timer block already
> handled by the rockchip-timer driver. Therefore adapt this driver to also
> be able to act as clocksource and sched clock on rk3188.
> 
> In order to test clocksource you can run following commands and check
> how much time it take in real. On rk3188 it take about ~45 seconds.
> 
>     cpufreq-set -f 1.6GHZ
>     date; sleep 60; date
> 
> In order to use the patch you need to declare two timers in the dts
> file. The first timer will be initialized as clockevent provider
> and the second one as clocksource. The clockevent must be from
> alive subsystem as it used as backup for the local timers at sleep
> time.
> 
> The patch does not break compatibility with older device tree files.
> The older device tree files contain only one timer. The timer
> will be initialized as clockevent, as expected.
> 
> rk3288 (and probably anything newer) is irrelevant to this patch,
> as it has the arch timer interface. This patch may be usefull
> for Cortex-A9/A5 based parts.
> 
> Signed-off-by: Alexander Kochetkov <al.kochet at gmail.com>
> Reviwed-by: Heiko Stübner <heiko at sntech.de>
> ---
>  drivers/clocksource/rockchip_timer.c |  137 +++++++++++++++++++++++++++++-----
>  1 file changed, 117 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/clocksource/rockchip_timer.c b/drivers/clocksource/rockchip_timer.c
> index 61c3bb1..3ff533c 100644
> --- a/drivers/clocksource/rockchip_timer.c
> +++ b/drivers/clocksource/rockchip_timer.c
> @@ -11,6 +11,7 @@
>  #include <linux/clockchips.h>
>  #include <linux/init.h>
>  #include <linux/interrupt.h>
> +#include <linux/sched_clock.h>
>  #include <linux/of.h>
>  #include <linux/of_address.h>
>  #include <linux/of_irq.h>
> @@ -19,6 +20,8 @@
>  
>  #define TIMER_LOAD_COUNT0	0x00
>  #define TIMER_LOAD_COUNT1	0x04
> +#define TIMER_CURRENT_VALUE0	0x08
> +#define TIMER_CURRENT_VALUE1	0x0C
>  #define TIMER_CONTROL_REG3288	0x10
>  #define TIMER_CONTROL_REG3399	0x1c
>  #define TIMER_INT_STATUS	0x18
> @@ -40,7 +43,19 @@ struct rk_clock_event_device {
>  	struct rk_timer timer;
>  };
>  
> +struct rk_clocksource {
> +	struct clocksource cs;
> +	struct rk_timer timer;
> +};
> +
> +enum {
> +	ROCKCHIP_CLKSRC_CLOCKEVENT = 0,
> +	ROCKCHIP_CLKSRC_CLOCKSOURCE = 1,
> +};
> +

This is over-engineered.

Simply convert bc_timer and cs_timer to pointers (may be take the opportunity to
change the name eg. bc_timer -> rk_clkevt and cs -> rk_clksrc).

Then in the init function check:

if (!rk_clkevt) {
	init clkevt
} else if (!rk_clksrc) {
	init clksrc
} else {
	Toooo many timer definitions ...
}

>  static struct rk_clock_event_device bc_timer;
> +static struct rk_clocksource cs_timer;
> +static int rk_next_clksrc = ROCKCHIP_CLKSRC_CLOCKEVENT;
>  
>  static inline struct rk_clock_event_device*
>  rk_clock_event_device(struct clock_event_device *ce)
> @@ -63,11 +78,37 @@ static inline void rk_timer_enable(struct rk_timer *timer, u32 flags)
>  	writel_relaxed(TIMER_ENABLE | flags, timer->ctrl);
>  }
>  
> -static void rk_timer_update_counter(unsigned long cycles,
> -				    struct rk_timer *timer)
> +static void rk_timer_update_counter(u64 cycles, struct rk_timer *timer)
> +{
> +	u32 lower = cycles & 0xFFFFFFFF;
> +	u32 upper = (cycles >> 32) & 0xFFFFFFFF;
> +
> +	writel_relaxed(lower, timer->base + TIMER_LOAD_COUNT0);
> +	writel_relaxed(upper, timer->base + TIMER_LOAD_COUNT1);
> +}
> +
> +static u64 notrace _rk_timer_counter_read(struct rk_timer *timer)
>  {
> -	writel_relaxed(cycles, timer->base + TIMER_LOAD_COUNT0);
> -	writel_relaxed(0, timer->base + TIMER_LOAD_COUNT1);
> +	u64 counter;
> +	u32 lower;
> +	u32 upper, old_upper;
> +
> +	upper = readl_relaxed(timer->base + TIMER_CURRENT_VALUE1);
> +	do {
> +		old_upper = upper;
> +		lower = readl_relaxed(timer->base + TIMER_CURRENT_VALUE0);
> +		upper = readl_relaxed(timer->base + TIMER_CURRENT_VALUE1);
> +	} while (upper != old_upper);
> +
> +	counter = upper;
> +	counter <<= 32;
> +	counter |= lower;
> +	return counter;
> +}
> +

Do you really want to use the 64 bits version? It has a non negligeable impact on
the performances and there is no deep idle state allowing a long and huge
energy saving. IOW, we consume more energy and time by computing the 64bits
clocksource for zero benefit. I recommend to convert to 32bits.

> +static u64 rk_timer_counter_read(struct rk_timer *timer)
> +{
> +	return _rk_timer_counter_read(timer);
>  }
>  
>  static void rk_timer_interrupt_clear(struct rk_timer *timer)
> @@ -120,13 +161,46 @@ static irqreturn_t rk_timer_interrupt(int irq, void *dev_id)
>  	return IRQ_HANDLED;
>  }
>  
> +static u64 rk_timer_clocksource_read(struct clocksource *cs)
> +{
> +	struct rk_clocksource *_cs =
> +		container_of(cs, struct rk_clocksource, cs);
> +
> +	return ~rk_timer_counter_read(&_cs->timer);
> +}
> +
> +static u64 notrace rk_timer_sched_clock_read(void)
> +{
> +	struct rk_clocksource *_cs = &cs_timer;
> +
> +	return ~_rk_timer_counter_read(&_cs->timer);
> +}
> +

You should be able to replace all this code by:

clocksource_mmio_init() with clocksource_mmio_readl_down().

>  static int __init rk_timer_init(struct device_node *np, u32 ctrl_reg)
>  {
> -	struct clock_event_device *ce = &bc_timer.ce;
> -	struct rk_timer *timer = &bc_timer.timer;
> +	struct clock_event_device *ce = NULL;
> +	struct clocksource *cs = NULL;
> +	struct rk_timer *timer = NULL;
>  	struct clk *timer_clk;
>  	struct clk *pclk;
>  	int ret = -EINVAL, irq;
> +	int clksrc;
> +
> +	clksrc = rk_next_clksrc;
> +	rk_next_clksrc++;
> +
> +	switch (clksrc) {
> +	case ROCKCHIP_CLKSRC_CLOCKEVENT:
> +		ce = &bc_timer.ce;
> +		timer = &bc_timer.timer;
> +		break;
> +	case ROCKCHIP_CLKSRC_CLOCKSOURCE:
> +		cs = &cs_timer.cs;
> +		timer = &cs_timer.timer;
> +		break;
> +	default:
> +		return -ENODEV;
> +	}
>  
>  	timer->base = of_iomap(np, 0);
>  	if (!timer->base) {
> @@ -170,26 +244,49 @@ static int __init rk_timer_init(struct device_node *np, u32 ctrl_reg)
>  		goto out_irq;
>  	}
>  
> -	ce->name = TIMER_NAME;
> -	ce->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
> -		       CLOCK_EVT_FEAT_DYNIRQ;
> -	ce->set_next_event = rk_timer_set_next_event;
> -	ce->set_state_shutdown = rk_timer_shutdown;
> -	ce->set_state_periodic = rk_timer_set_periodic;
> -	ce->irq = irq;
> -	ce->cpumask = cpu_possible_mask;
> -	ce->rating = 250;
> +	if (ce) {
> +		ce->name = TIMER_NAME;
> +		ce->features = CLOCK_EVT_FEAT_PERIODIC |
> +			       CLOCK_EVT_FEAT_ONESHOT |
> +			       CLOCK_EVT_FEAT_DYNIRQ;
> +		ce->set_next_event = rk_timer_set_next_event;
> +		ce->set_state_shutdown = rk_timer_shutdown;
> +		ce->set_state_periodic = rk_timer_set_periodic;
> +		ce->irq = irq;
> +		ce->cpumask = cpu_possible_mask;
> +		ce->rating = 250;
> +	}
> +
> +	if (cs) {
> +		cs->name = TIMER_NAME;
> +		cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
> +		cs->mask = CLOCKSOURCE_MASK(64);
> +		cs->read = rk_timer_clocksource_read;
> +		cs->rating = 250;
> +	}
>  
>  	rk_timer_interrupt_clear(timer);
>  	rk_timer_disable(timer);
>  
> -	ret = request_irq(irq, rk_timer_interrupt, IRQF_TIMER, TIMER_NAME, ce);
> -	if (ret) {
> -		pr_err("Failed to initialize '%s': %d\n", TIMER_NAME, ret);
> -		goto out_irq;
> +	if (ce) {
> +		ret = request_irq(irq, rk_timer_interrupt, IRQF_TIMER,
> +				  TIMER_NAME, ce);
> +		if (ret) {
> +			pr_err("Failed to initialize '%s': %d\n",
> +				TIMER_NAME, ret);
> +			goto out_irq;
> +		}
> +
> +		clockevents_config_and_register(ce, timer->freq, 1, UINT_MAX);
>  	}

'ce' blocks can be grouped together.

>  
> -	clockevents_config_and_register(ce, timer->freq, 1, UINT_MAX);
> +	if (cs) {
> +		rk_timer_update_counter(U64_MAX, timer);
> +		rk_timer_enable(timer, 0);
> +		clocksource_register_hz(cs, timer->freq);
> +		sched_clock_register(rk_timer_sched_clock_read, 64,
> +				     timer->freq);

	The 'cs' can be replaced by clocksource_mmio_init.

> +	}
>  
>  	return 0;
>  
> -- 
> 1.7.9.5
> 

-- 

 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog