[PATCH v2 12/26] drm/rockchip: dw-mipi-dsi: prepare panel after phy init

[John Keeping]

Some panels need to be configured with commands sent over the MIPI link,
which they will do in the prepare hook.  Call this after the PHY has
been initialized so that we are able to send commands to the panel.

Signed-off-by: John Keeping <john at metanate.com>
---
Unchanged in v2
---
 drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index ddbc037e7ced..7ada6d8ed143 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -896,12 +896,14 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
 	dw_mipi_dsi_dphy_timing_config(dsi);
 	dw_mipi_dsi_dphy_interface_config(dsi);
 	dw_mipi_dsi_clear_err(dsi);
-	if (drm_panel_prepare(dsi->panel))
-		dev_err(dsi->dev, "failed to prepare panel\n");
 
 	dw_mipi_dsi_phy_init(dsi);
 	dw_mipi_dsi_wait_for_two_frames(mode);
 
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+	if (drm_panel_prepare(dsi->panel))
+		dev_err(dsi->dev, "failed to prepare panel\n");
+
 	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
 	drm_panel_enable(dsi->panel);
 
-- 
2.11.0.197.gb556de5.dirty