[PATCH] Revert "mmc: dw_mmc-rockchip: add runtime PM support"
Jaehoon Chung
jh80.chung at samsung.com
Thu Jan 19 22:08:57 PST 2017
Hi,
On 01/17/2017 10:38 PM, Romain Perier wrote:
> Hi,
>
> In my case I can reproduce the issue on the rock2 and the firefly-rk3288. A workaround is to
>
> comment the line ".pm = <&pm_ops_foo>" .
Sorry for late. I'm checking runtime PM for this.
After that, i will decide whether revert or not.
Best Regards,
Jaehoon Chung
>
> Thanks,
> Romain
>
>
> Le 17/01/2017 à 14:28, Romain Perier a écrit :
>> Hello,
>>
>> This commit also breaks reboot and poweroff (the pmic no longer turn the power supply off), see below:
>>
>> # poweroff
>> # Stopping network: ifdown: interface lo not configured
>> OK
>> Saving random seed... done.
>> Stopping logging: OK
>> umount: devtmpfs busy - remounted read-only
>> The system is going down NOW!
>> Sent SIGTERM to all processes
>> Sent SIGKILL to all processes
>> Requesting system poweroff
>> [ 243.673159] INFO: task init:168 blocked for more than 120 seconds.
>> [ 243.701298] Not tainted 4.10.0-rc4-13066-gc10b6c6 #108
>> [ 243.728802] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> [ 243.758948] init D 0 168 1 0x00000000
>> [ 243.786412] [<c0888740>] (__schedule) from [<c0888b10>] (schedule+0x44/0x9c)
>> [ 243.815411] [<c0888b10>] (schedule) from [<c088c218>] (schedule_timeout+0x1d8/0x220)
>> [ 243.845267] [<c088c218>] (schedule_timeout) from [<c0889528>] (wait_for_common+0xa4/0x168)
>> [ 243.876105] [<c0889528>] (wait_for_common) from [<c06da03c>] (mmc_wait_for_req_done+0x8c/0x110)
>> [ 243.907150] [<c06da03c>] (mmc_wait_for_req_done) from [<c06da204>] (mmc_wait_for_cmd+0x58/0x78)
>> [ 243.937855] [<c06da204>] (mmc_wait_for_cmd) from [<c06e14ec>] (__mmc_switch+0xbc/0x34c)
>> [ 243.967791] [<c06e14ec>] (__mmc_switch) from [<c06e17a4>] (mmc_switch+0x28/0x30)
>> [ 243.997029] [<c06e17a4>] (mmc_switch) from [<c06db144>] (mmc_flush_cache+0x54/0x80)
>> [ 244.026955] [<c06db144>] (mmc_flush_cache) from [<c06e0084>] (_mmc_suspend+0x40/0x268)
>> [ 244.057529] [<c06e0084>] (_mmc_suspend) from [<c06dcf3c>] (mmc_bus_shutdown+0x40/0x64)
>> [ 244.088412] [<c06dcf3c>] (mmc_bus_shutdown) from [<c04db050>] (device_shutdown+0x144/0x1d8)
>> [ 244.120015] [<c04db050>] (device_shutdown) from [<c01503b8>] (kernel_power_off+0x34/0x70)
>> [ 244.151235] [<c01503b8>] (kernel_power_off) from [<c0150598>] (SyS_reboot+0x15c/0x1d0)
>> [ 244.182037] [<c0150598>] (SyS_reboot) from [<c01076c0>] (ret_fast_syscall+0x0/0x3c)
>> [ 366.553025] INFO: task init:168 blocked for more than 120 seconds.
>> [ 366.583187] Not tainted 4.10.0-rc4-13066-gc10b6c6 #108
>> [ 366.613053] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>>
>>
>>
>> Reverting this commit solves the issue.
>>
>> Regards,
>> Romain
>>
>>
>> 2016-12-30 3:50 GMT+01:00 Jaehoon Chung <jh80.chung at samsung.com <mailto:jh80.chung at samsung.com>>:
>>
>> On 12/30/2016 11:44 AM, Randy Li wrote:
>> >
>> >
>> > On 12/30/2016 10:35 AM, Jaehoon Chung wrote:
>> >> On 12/30/2016 12:07 AM, ayaka wrote:
>> >>>
>> >>>
>> >>> On 12/29/2016 10:04 PM, Jaehoon Chung wrote:
>> >>>> Hi,
>> >>>>
>> >>>> On 12/29/2016 09:55 PM, ayaka wrote:
>> >>>>> [ 5.849733] rk_gmac-dwmac ff290000.ethernet (unnamed
>> net_device) (uninitialized): Enable RX Mitigation via HW Watchdog
>> Timer
>> >>>>> [ 5.944512] mmc_host mmc1: Bus speed (slot 0) =
>> 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
>> >>>>> [ 5.958249] mmc1: new ultra high speed DDR50 SDIO card at
>> address 0001
>> >>>>> [ 6.294548] dwmmc_rockchip ff0f0000.dwmmc: Successfully
>> tuned phase to 177
>> >>>>> [ 6.301591] mmc2: new HS200 MMC card at address 0001
>> >>>>> [ 6.306758] mmc_host mmc0: Bus speed (slot 0) = 300000Hz
>> (slot req 300000Hz, actual 300000HZ div = 0)
>> >>>>> [ 6.316830] mmcblk2: mmc2:0001 AGND3R 14.6 GiB
>> >>>>> [ 6.321881] mmcblk2boot0: mmc2:0001 AGND3R partition 1
>> 4.00 MiB
>> >>>>> [ 6.328331] mmcblk2boot1: mmc2:0001 AGND3R partition 2
>> 4.00 MiB
>> >>>>> [ 6.334792] mmcblk2rpmb: mmc2:0001 AGND3R partition 3
>> 4.00 MiB
>> >>>>> [ 6.344295] mmcblk2: p1 p2 p3 p4 p5 p6 p7
>> >>>>> [ 6.469892] mmc_host mmc0: Bus speed (slot 0) = 200000Hz
>> (slot req 200000Hz, actual 200000HZ div = 0)
>> >>>>> [ 6.621888] mmc_host mmc0: Bus speed (slot 0) = 187500Hz
>> (slot req 100000Hz, actual 93750HZ div = 1)
>> >>>>> [ 6.917883] libphy: stmmac: probed
>> >>>>> [ 6.921319] rk_gmac-dwmac ff290000.ethernet eth0: PHY ID
>> 001cc915 at 0 IRQ POLL (stmmac-0:00) active
>> >>>>> [ 6.930476] rk_gmac-dwmac ff290000.ethernet eth0: PHY ID
>> 001cc915 at 2 IRQ POLL (stmmac-0:02)
>> >>>>> [ 6.939757] input: gpio-keys as
>> /devices/platform/gpio-keys/input/input0
>> >>>>> [ 6.946937] rtc-hym8563 0-0051: no valid clock/calendar
>> values available
>> >>>>> [ 6.953694] rtc-hym8563 0-0051: hctosys: unable to read
>> the hardware clock
>> >>>>> [ 6.961262] vcc_sd: disabling
>> >>>>> [ 6.964275] dovdd_1v8: disabling
>> >>>>> [ 6.967527] dvdd_1v2: disabling
>> >>>>> [ 6.971006] vdd10_lcd: disabling
>> >>>>> [ 6.974701] vcc18_lcd: disabling
>> >>>>> [ 6.978467] ttyS2 - failed to request DMA
>> >>>>> [ 7.101883] mmc_host mmc0: Bus speed (slot 0) = 400000Hz
>> (slot req 400000Hz, actual 400000HZ div = 0)
>> >>>>> [ 7.253874] mmc_host mmc0: Bus speed (slot 0) = 300000Hz
>> (slot req 300000Hz, actual 300000HZ div = 0)
>> >>>>> [ 7.405883] mmc_host mmc0: Bus speed (slot 0) = 200000Hz
>> (slot req 200000Hz, actual 200000HZ div = 0)
>> >>>>> [ 7.557885] mmc_host mmc0: Bus speed (slot 0) = 187500Hz
>> (slot req 100000Hz, actual 93750HZ div = 1)
>> >>>>> [ 8.037872] mmc_host mmc0: Bus speed (slot 0) = 400000Hz
>> (slot req 400000Hz, actual 400000HZ div = 0)
>> >>>>> [ 8.189877] mmc_host mmc0: Bus speed (slot 0) = 300000Hz
>> (slot req 300000Hz, actual 300000HZ div = 0)
>> >>>>> [ 8.341881] mmc_host mmc0: Bus speed (slot 0) = 200000Hz
>> (slot req 200000Hz, actual 200000HZ div = 0)
>> >>>>> [ 8.493884] mmc_host mmc0: Bus speed (slot 0) = 187500Hz
>> (slot req 100000Hz, actual 93750HZ div = 1)
>> >>>>> [ 8.973871] mmc_host mmc0: Bus speed (slot 0) = 400000Hz
>> (slot req 400000Hz, actual 400000HZ div = 0)
>> >>>>> [ 9.125876] mmc_host mmc0: Bus speed (slot 0) = 300000Hz
>> (slot req 300000Hz, actual 300000HZ div = 0)
>> >>>>> [ 9.277884] mmc_host mmc0: Bus speed (slot 0) = 200000Hz
>> (slot req 200000Hz, actual 200000HZ div = 0)
>> >>>>> [ 9.429882] mmc_host mmc0: Bus speed (slot 0) = 187500Hz
>> (slot req 100000Hz, actual 93750HZ div = 1)
>> >>>>>
>> >>>>> looping here
>> >>>>>
>> >>>>> If I revert that patch, there are still lots of Bus speed
>> messages, but finally would enter into system.
>> >>>>>
>> >>>> Plz..Don't put the comment on the top.
>> >>>>
>> >>>> Which kernel did you use?
>> >>> Add linux-next specific files for 20161224
>> >>
>> >> mmc0 is what card? Is it polling for detecting card?
>> >> (It seems the SD-card..right?)
>> > Yes, but the Firefly release won't show that, just stop at
>> "ttyS2 - failed to request DMA". I check both the firefly reload
>> and firefly release, they both have a cd line for them, so it
>> won't be poll mode.
>>
>> I don't have Rockchip board, so I hope that Shawn will check it.
>> But i will check the displayed the log message.
>>
>> Best Regards,
>> Jaehoon Chung
>>
>> >> Those logs should be polled for detecting mmc0 card..Hmm..I
>> sent the patch for disabling log message when polling.
>> >> If this log is displayed, then my patch might be some wrong.. :(
>> >>
>> >> Best Regards,
>> >> Jaehoon Chung
>> >>
>> >>>>
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>
>> >>
>> >> [snip]
>> >>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>
>> >>
>> >
>>
>>
>> _______________________________________________
>> Linux-rockchip mailing list
>> Linux-rockchip at lists.infradead.org
>> <mailto:Linux-rockchip at lists.infradead.org>
>> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>> <http://lists.infradead.org/mailman/listinfo/linux-rockchip>
>>
>>
>
>
More information about the Linux-rockchip
mailing list