[PATCH 15/26] drm/rockchip: dw-mipi-dsi: ensure PHY is reset

[John Keeping]

Also don't power up the DSI host at this point since this is not
necessary in order to configure the PHY and we do so later when
selecting video or command mode.

Signed-off-by: John Keeping <john at metanate.com>
---
 drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index 8854b8670d72..73c28e205fc5 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -398,7 +398,10 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
 		return testdin;
 	}
 
-	dsi_write(dsi, DSI_PWR_UP, POWERUP);
+	/* Start by clearing PHY state */
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
 
 	dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE |
 					 VCO_RANGE_CON_SEL(vco) |
-- 
2.10.0.278.g4f427b1.dirty