[PATCH 0/4] the fix for the USB HOST1 at rk3288 platform

[Randy Li]

  At this stage it is the only "full features" and well verified 
USB EHCI controller in this platform. More review is always necessary.

Changelog:
 - v7:
    adding a wrapper for the reset operation for phy
    using that wrapper
 - v6:
    move pwms pinctrl to pwms node
    fix the order of the dtb file in Makefile
 - v5:
   - correct the mail format
 - v4:
   - re-order some nodes in alphabetical order
   - fix some minor bugs
   - add a entry in vendor list
 - v3:
   - fixing the rtc clock, using clock source from PMIC
   - enable the tmu
   - enable the fimc for elite board
   - suuport the audio codec at elite board
   - fixing minor bugs in the last commit
 - v2:
   - removing rtc node
     the clock source driver is not done yet.
   - adding exynos-bus
   - fixing the MFC

Randy Li (4):
  phy: Add reset callback
  phy: rockchip-usb: use rockchip_usb_phy_reset to reset phy during
    wakeup
  usb: dwc2: assert phy reset when waking up in rk3288 platform
  ARM: dts: rockchip: Point rk3288 dwc2 usb at the full PHY reset

 .../devicetree/bindings/phy/rockchip-usb-phy.txt     |  3 +++
 arch/arm/boot/dts/rk3288.dtsi                        |  4 ++++
 drivers/phy/phy-core.c                               | 14 ++++++++++++++
 drivers/phy/phy-rockchip-usb.c                       | 20 ++++++++++++++++++++
 drivers/usb/dwc2/core_intr.c                         | 11 +++++++++++
 include/linux/phy/phy.h                              |  3 +++
 6 files changed, 55 insertions(+)

-- 
2.7.4