[PATCH] PM / AVS: rockchip-io: make the log more consistent

[Kevin Hilman]

Heiko Stuebner <heiko at sntech.de> writes:

> Am Montag, 10. Oktober 2016, 20:44:22 CEST schrieb Shawn Lin:
>> When testing SD hotplug automatically, I got bunch of
>> useless log like this:
>> 
>> [  588.357838] mmc0: card 0007 removed
>> [  589.492664] rockchip-iodomain ff770000.syscon:io-domains: Setting to
>> 3300000 done [  589.500698] vccio_sd: ramp_delay not set
>> [  589.504817] rockchip-iodomain ff770000.syscon:io-domains: Setting to
>> 3300000 done [  589.669705] rockchip-iodomain ff770000.syscon:io-domains:
>> Setting to 3300000 done [  589.677593] vccio_sd: ramp_delay not set
>> [  589.681581] rockchip-iodomain ff770000.syscon:io-domains: Setting to
>> 1800000 done [  590.032820] dwmmc_rockchip ff0c0000.dwmmc: Successfully
>> tuned phase to 140 [  590.039725] mmc0: new ultra high speed SDR50 SDHC
>> card at address 0007 [  590.046641] mmcblk0: mmc0:0007 SD32G 29.3 GiB
>> [  590.052163]  mmcblk0: p1
>> 
>> Moreover the code is intent to print the 'uV' for debug but
>> later print it using dev_info. It looks more like to me that
>> it should be the real intention of the code. Anyway, let's
>> mark this verbose log as debug message.
>> 
>> Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com>
>
> reducing the amount of logs, especially for information not generally needed 
> looks sane
>
> Reviewed-by: Heiko Stuebner <heiko at sntech.de>

Acked-by: Kevin Hilman <khilman at baylibre.com>

Rafael, feel free to apply directly as a fix for v4.9-rc, or wait for
v4.10 if you prefer.

Kevin