[PATCH v3 4/6] drm: bridge/analogix: switch Main-link and eDP PHY when enable/disable psr

Sean Paul seanpaul at chromium.org
Tue Oct 18 08:53:16 PDT 2016


On Tue, Oct 18, 2016 at 2:21 AM, Zain Wang <wzz at rock-chips.com> wrote:
> From: zain wang <wzz at rock-chips.com>
>
> turn off Main-link and power down eDP PHY when enable psr,
> turn on Main-link and power up eDP PHY when disable psr.
>
> Signed-off-by: zain wang <wzz at rock-chips.com>
> ---
>
> Changes in v3:
> - detecting PSR state at enable/disable_psr() avoid to make link training
>   when sink in not PSR State.
>
> Changes in v2:
> - misc changes
>
>  drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 123 +++++++++++++--------
>  1 file changed, 76 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index c4f139a..c662e5d 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -98,50 +98,6 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device *dp)
>         return 0;
>  }
>
> -int analogix_dp_enable_psr(struct device *dev)
> -{
> -       struct analogix_dp_device *dp = dev_get_drvdata(dev);
> -       struct edp_vsc_psr psr_vsc;
> -
> -       if (!dp->psr_support)
> -               return -EINVAL;
> -
> -       /* Prepare VSC packet as per EDP 1.4 spec, Table 6.9 */
> -       memset(&psr_vsc, 0, sizeof(psr_vsc));
> -       psr_vsc.sdp_header.HB0 = 0;
> -       psr_vsc.sdp_header.HB1 = 0x7;
> -       psr_vsc.sdp_header.HB2 = 0x2;
> -       psr_vsc.sdp_header.HB3 = 0x8;
> -
> -       psr_vsc.DB0 = 0;
> -       psr_vsc.DB1 = EDP_VSC_PSR_STATE_ACTIVE | EDP_VSC_PSR_CRC_VALUES_VALID;
> -
> -       return analogix_dp_send_psr_spd(dp, &psr_vsc);
> -}
> -EXPORT_SYMBOL_GPL(analogix_dp_enable_psr);
> -
> -int analogix_dp_disable_psr(struct device *dev)
> -{
> -       struct analogix_dp_device *dp = dev_get_drvdata(dev);
> -       struct edp_vsc_psr psr_vsc;
> -
> -       if (!dp->psr_support)
> -               return -EINVAL;
> -
> -       /* Prepare VSC packet as per EDP 1.4 spec, Table 6.9 */
> -       memset(&psr_vsc, 0, sizeof(psr_vsc));
> -       psr_vsc.sdp_header.HB0 = 0;
> -       psr_vsc.sdp_header.HB1 = 0x7;
> -       psr_vsc.sdp_header.HB2 = 0x2;
> -       psr_vsc.sdp_header.HB3 = 0x8;
> -
> -       psr_vsc.DB0 = 0;
> -       psr_vsc.DB1 = 0;
> -
> -       return analogix_dp_send_psr_spd(dp, &psr_vsc);
> -}
> -EXPORT_SYMBOL_GPL(analogix_dp_disable_psr);
> -
>  static bool analogix_dp_detect_sink_psr(struct analogix_dp_device *dp)
>  {
>         unsigned char psr_version;
> @@ -162,12 +118,11 @@ static void analogix_dp_enable_sink_psr(struct analogix_dp_device *dp)
>         drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en);
>
>         /* Main-Link transmitter remains active during PSR active states */
> -       psr_en = DP_PSR_MAIN_LINK_ACTIVE | DP_PSR_CRC_VERIFICATION;
> +       psr_en = DP_PSR_CRC_VERIFICATION;
>         drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en);
>
>         /* Enable psr function */
> -       psr_en = DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE |
> -                DP_PSR_CRC_VERIFICATION;
> +       psr_en = DP_PSR_ENABLE | DP_PSR_CRC_VERIFICATION;
>         drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en);
>
>         analogix_dp_enable_psr_crc(dp);
> @@ -870,6 +825,80 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
>                 analogix_dp_enable_sink_psr(dp);
>  }
>
> +int analogix_dp_enable_psr(struct device *dev)
> +{
> +       struct analogix_dp_device *dp = dev_get_drvdata(dev);
> +       struct edp_vsc_psr psr_vsc;
> +       int retval;

int ret;

> +       u8 sink;
> +
> +       if (!dp->psr_support)
> +               return -EINVAL;
> +
> +       drm_dp_dpcd_readb(&dp->aux, DP_PSR_STATUS, &sink);

return value not checked

> +       if (sink == DP_PSR_SINK_ACTIVE_RFB)
> +               return 0;
> +
> +       /* Prepare VSC packet as per EDP 1.4 spec, Table 6.9 */
> +       memset(&psr_vsc, 0, sizeof(psr_vsc));
> +       psr_vsc.sdp_header.HB0 = 0;
> +       psr_vsc.sdp_header.HB1 = 0x7;
> +       psr_vsc.sdp_header.HB2 = 0x2;
> +       psr_vsc.sdp_header.HB3 = 0x8;
> +
> +       psr_vsc.DB0 = 0;
> +       psr_vsc.DB1 = EDP_VSC_PSR_STATE_ACTIVE | EDP_VSC_PSR_CRC_VALUES_VALID;
> +
> +       retval = analogix_dp_send_psr_spd(dp, &psr_vsc);
> +

remove extra line

> +       if (!retval) {
> +               /* Power down the eDP PHY */
> +               analogix_dp_set_analog_power_down(dp, POWER_ALL, true);
> +       }
> +
> +       return retval;
> +}
> +EXPORT_SYMBOL_GPL(analogix_dp_enable_psr);
> +
> +int analogix_dp_disable_psr(struct device *dev)
> +{
> +       struct analogix_dp_device *dp = dev_get_drvdata(dev);
> +       struct edp_vsc_psr psr_vsc;
> +       int ret;
> +       u8 sink;
> +
> +       if (!dp->psr_support)
> +               return -EINVAL;
> +
> +       /* Power up the eDP PHY */
> +       analogix_dp_set_analog_power_down(dp, POWER_ALL, false);
> +
> +       drm_dp_dpcd_readb(&dp->aux, DP_PSR_STATUS, &sink);
> +       if (sink == DP_PSR_SINK_INACTIVE)
> +               return 0;
> +
> +       ret = drm_dp_dpcd_writeb(&dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
> +       if (ret < 0) {
> +               dev_err(dp->dev, "Failed to set DP Power0\n");

print ret in the error

> +       }
> +
> +       analogix_dp_set_link_train(dp, dp->video_info.max_lane_count,
> +                                  dp->video_info.max_link_rate);
> +
> +       /* Prepare VSC packet as per EDP 1.4 spec, Table 6.9 */
> +       memset(&psr_vsc, 0, sizeof(psr_vsc));
> +       psr_vsc.sdp_header.HB0 = 0;
> +       psr_vsc.sdp_header.HB1 = 0x7;
> +       psr_vsc.sdp_header.HB2 = 0x2;
> +       psr_vsc.sdp_header.HB3 = 0x8;
> +
> +       psr_vsc.DB0 = 0;
> +       psr_vsc.DB1 = 0;
> +
> +       return analogix_dp_send_psr_spd(dp, &psr_vsc);
> +}
> +EXPORT_SYMBOL_GPL(analogix_dp_disable_psr);
> +
>  /*
>   * This function is a bit of a catch-all for panel preparation, hopefully
>   * simplifying the logic of functions that need to prepare/unprepare the panel
> --
> 1.9.1
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



More information about the Linux-rockchip mailing list