[PATCH] ARM: dts: rockchip: remove always-on and boot-on from vcc_sd for px3-evb

[Heiko Stuebner]

Am Freitag, 23. September 2016, 08:09:10 CEST schrieb Shawn Lin:
> Please don't add these for vcc_sd, and mmc-core/driver will control
> it. Otherwise, it will waste energy even without sdmmc in slot.
> 
> Moreover, it will causes a bug:
> If we insert/remove sd card, we could see
> [9.337271] mmc0: new ultra high speed SDR25 SDHC card at address 0007
> [9.345144] mmcblk0: mmc0:0007 SD32G 29.3 GiB
> 
> This is okay for normal sd insert/remove test, but when I debug some
> issues for sdmmc, I did unbind/bind test. And there is a interesting
> phenomenon when we bind the driver again:
> [58.314069] mmc0: new high speed SDHC card at address 0007
> [58.320282] mmcblk0: mmc0:0007 SD32G 29.3 GiB
> 
> So the sd card could just support high speed without power cycle
> since the vcc_sd is always on, which makes the sd card fail to
> reinit its internal ocr mask.
> 
> Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com>

applied for 4.10


Thanks
Heiko