[PATCH v2 2/2] ARM: dts: rockchip: Add rk3066 MK808 board

Shawn Lin shawn.lin at rock-chips.com
Fri Oct 7 20:01:08 PDT 2016


在 2016/10/7 18:01, Heiko Stuebner 写道:
> Am Freitag, 7. Oktober 2016, 10:29:48 CEST schrieb Shawn Lin:
>> Hi Paweł ,
>>
>> On 2016/10/7 1:38, Paweł Jarosz wrote:
>>> MK808 is a tv stick which has rockchip rk3066 CPU inside, two usb ports
>>> - host and otg, micro sd card slot and onboard wifi RK901.
>>>
>>> Signed-off-by: Paweł Jarosz <paweljarosz3691 at gmail.com>
>>> ---
>>>
>>> Changes in v2:
>>> - included Heiko sugestion.
>>>
>>>  Documentation/devicetree/bindings/arm/rockchip.txt |   4 +
>>>  arch/arm/boot/dts/Makefile                         |   1 +
>>>  arch/arm/boot/dts/rk3066a-mk808.dts                | 184
>>>  +++++++++++++++++++++ 3 files changed, 189 insertions(+)
>>>  create mode 100644 arch/arm/boot/dts/rk3066a-mk808.dts
>>>
>>> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt
>>> b/Documentation/devicetree/bindings/arm/rockchip.txt index
>>> 55f388f..c09595b 100644
>>> --- a/Documentation/devicetree/bindings/arm/rockchip.txt
>>> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt
>>> @@ -17,6 +17,10 @@ Rockchip platforms device tree bindings
>>>
>>>      Required root node properties:
>>>        - compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
>>>
>>> +- Rikomagic MK808 v1 board:
>>> +    Required root node properties:
>>> +      - compatible = "rikomagic,mk808", "rockchip,rk3066a";
>>> +
>>>
>>>  - Radxa Rock board:
>>>      Required root node properties:
>>>        - compatible = "radxa,rock", "rockchip,rk3188";
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index befcd26..f19cc1d 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -639,6 +639,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
>>>
>>>  	rk3036-kylin.dtb \
>>>  	rk3066a-bqcurie2.dtb \
>>>  	rk3066a-marsboard.dtb \
>>>
>>> +	rk3066a-mk808.dtb \
>>>
>>>  	rk3066a-rayeager.dtb \
>>>  	rk3188-radxarock.dtb \
>>>  	rk3228-evb.dtb \
>>>
>>> diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts
>>> b/arch/arm/boot/dts/rk3066a-mk808.dts new file mode 100644
>>> index 0000000..2878562
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/rk3066a-mk808.dts
>>> @@ -0,0 +1,184 @@
>>> +/*
>>> + * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691 at gmail.com>
>>> + *
>>> + * This file is dual-licensed: you can use it either under the terms
>>> + * of the GPL or the X11 license, at your option. Note that this dual
>>> + * licensing only applies to this file, and not this project as a
>>> + * whole.
>>> + *
>>> + *  a) This file is free software; you can redistribute it and/or
>>> + *     modify it under the terms of the GNU General Public License as
>>> + *     published by the Free Software Foundation; either version 2 of the
>>> + *     License, or (at your option) any later version.
>>> + *
>>> + *     This file is distributed in the hope that it will be useful,
>>> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>> + *     GNU General Public License for more details.
>>> + *
>>> + * Or, alternatively,
>>> + *
>>> + *  b) Permission is hereby granted, free of charge, to any person
>>> + *     obtaining a copy of this software and associated documentation
>>> + *     files (the "Software"), to deal in the Software without
>>> + *     restriction, including without limitation the rights to use,
>>> + *     copy, modify, merge, publish, distribute, sublicense, and/or
>>> + *     sell copies of the Software, and to permit persons to whom the
>>> + *     Software is furnished to do so, subject to the following
>>> + *     conditions:
>>> + *
>>> + *     The above copyright notice and this permission notice shall be
>>> + *     included in all copies or substantial portions of the Software.
>>> + *
>>> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>>> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>>> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>>> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>>> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>>> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>>> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>>> + *     OTHER DEALINGS IN THE SOFTWARE.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include "rk3066a.dtsi"
>>> +
>>> +/ {
>>> +	model = "Rikomagic MK808";
>>> +	compatible = "rikomagic,mk808", "rockchip,rk3066a";
>>> +
>>> +	chosen {
>>> +		stdout-path = "serial2:115200n8";
>>> +	};
>>> +
>>> +	memory at 60000000 {
>>> +		device_type = "memory";
>>> +		reg = <0x60000000 0x40000000>;
>>> +	};
>>> +
>>> +	gpio-leds {
>>> +		compatible = "gpio-leds";
>>> +
>>> +		blue {
>>> +			label = "mk808:blue:power";
>>> +			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
>>> +			default-state = "off";
>>> +			linux,default-trigger = "default-on";
>>> +		};
>>> +	};
>>> +
>>> +	mmc_pwrseq: mmc-pwrseq {
>>> +		compatible = "mmc-pwrseq-simple";
>>> +		pinctrl-names = "default";
>>> +		pinctrl-0 = <&sdmmc_pwr>;
>>
>> sd slot does not contain a reset pin. So the power pin should be
>> enough. just add sdmmc_pwr to mmc0's pinctrl-0 and let mmc driver
>> control it should be enough. Typically pwrseq is for emmc and sdio.
>> We don't need a pwerseq to control power for sd slot..
>>
>> But it seems sdmmc_pwr is a GPIO, but not functional port.
>> So I am interesting that why MK808 board doesn't use the mmc
>> controller's default power pin but chosing another gpio, so finally
>> we have to add thses code for your DT.
>
> Actually, we always model the sd-mmc pwr-pin as gpio-based regulator (see
> sdmmc-regulator for example in the rk3066a-rayeager.dts), and specifiy this
> regulator as vmmc. That way the mmc core really can control the power.

yes it did. There are two ways for us to control vmmc properly.
If we use gpio-based regulator or PMIC, mmc core take over it
to control the power correctly. But if we use the dafault functional
port, namely SDMMC_PWREN, the dw_mmc driver could handle the control
when doing set_ios.. Both of these two could work fine. But I always
chose the latter one to simplify the dts.

Anyway, I won't insist on it if it looks okay to you. :)

>
>
> Heiko
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>


-- 
Best Regards
Shawn Lin




More information about the Linux-rockchip mailing list