[PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support

[Heiko Stuebner]

Am Dienstag, 24. Mai 2016, 14:57:23 schrieb Yakir Yang:
> RK3399 and RK3288 shared the same eDP IP controller, only some light
> difference with VOP configure and GRF configure.
> 
> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
> ---
> Changes in v2:
> - rebase with drm-next, fix some conflicts
> 
>  .../bindings/display/bridge/analogix_dp.txt        |  1 +
>  .../display/rockchip/analogix_dp-rockchip.txt      |  2 +-
>  drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    | 36
> ++++++++++++++++++++-- include/drm/bridge/analogix_dp.h                  
> |  1 +
>  4 files changed, 37 insertions(+), 3 deletions(-)
> 
> diff --git
> a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt index
> 4f2ba8c..4a0f4f7 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> @@ -5,6 +5,7 @@ Required properties for dp-controller:
>  		platform specific such as:
>  		 * "samsung,exynos5-dp"
>  		 * "rockchip,rk3288-dp"
> +		 * "rockchip,rk3399-edp"

the cleanlines-freak in my likes to know if there is a difference between 
the rk3399 being called -edp here and -dp on the rk3288 :-)

[...]

> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c index 29c4105..d5d4e04
> 100644
> --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> @@ -148,6 +148,10 @@ rockchip_dp_drm_encoder_atomic_check(struct
> drm_encoder *encoder, struct drm_connector_state *conn_state)
>  {
>  	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
> +	struct rockchip_dp_device *dp = to_dp(encoder);
> +	int ret;
> +
> +	s->output_type = DRM_MODE_CONNECTOR_eDP;
> 
>  	/*
>  	 * FIXME(Yakir): driver should configure the CRTC output video
> @@ -162,8 +166,27 @@ rockchip_dp_drm_encoder_atomic_check(struct
> drm_encoder *encoder, * But if I configure CTRC to RGBaaa, and eDP driver
> still keep * RGB666 input video mode, then screen would works prefect.
>  	 */
> -	s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
> -	s->output_type = DRM_MODE_CONNECTOR_eDP;
> +
> +	ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, encoder);
> +	if (ret < 0)
> +		return;

this needs a value returned (probably ret), otherwise you create a 
warning: ‘return’ with no value, in function returning non-void

drm_of_encoder_active_endpoint_id also always returns -EINVAL on rk3288-
veyron-jerry because encoder->crtc is unset in 
drm_of_encoder_active_endpoint and that breaks display output right now.

Looking through drm code it seems only two functions would set encoder->crtc
- drm_atomic_helper_update_legacy_modeset_state
- drm_crtc_helper_set_config

drm_crtc_helper_set_config callback got dropped in the atomic-conversion and 
the other sounds to be somewhat in the legacy area.

After that drm-internals get a bit confusing.


Heiko