[PATCH v3] mmc: sdhci-of-arasan: fix set_clock when a phy is supported
Adrian Hunter
adrian.hunter at intel.com
Wed May 4 02:54:56 PDT 2016
On 04/05/16 04:43, Shawn Lin wrote:
> commit 61b914eb81f8 ("mmc: sdhci-of-arasan: add phy support for
> sdhci-of-arasan") introduce phy support for arasan. According to
> the vendor's databook, we should make sure the phy is in poweroff
> status before we configure the clk stuff. Otherwise it may cause
> some IO sample timing issues from the test. And we don't need this
> extra operation while running in low performance mode since phy
> doesn't trigger sampling block.
>
> Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com>
Acked-by: Adrian Hunter <adrian.hunter at intel.com>
>
> ---
>
> Changes in v3:
> - avoid use sleep function with the scope of spinlock because
> phy APIs call mutex.
>
> Changes in v2:
> - Rename commit msg title to indicate it's a fix
>
> drivers/mmc/host/sdhci-of-arasan.c | 26 +++++++++++++++++++++++++-
> 1 file changed, 25 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index 2e482b1..b6f4c1d 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -55,8 +55,32 @@ static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
> return freq;
> }
>
> +static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
> + bool ctrl_phy = false;
> +
> + if (clock > MMC_HIGH_52_MAX_DTR && (!IS_ERR(sdhci_arasan->phy)))
> + ctrl_phy = true;
> +
> + if (ctrl_phy) {
> + spin_unlock_irq(&host->lock);
> + phy_power_off(sdhci_arasan->phy);
> + spin_lock_irq(&host->lock);
> + }
> +
> + sdhci_set_clock(host, clock);
> +
> + if (ctrl_phy) {
> + spin_unlock_irq(&host->lock);
> + phy_power_on(sdhci_arasan->phy);
> + spin_lock_irq(&host->lock);
> + }
> +}
> +
> static struct sdhci_ops sdhci_arasan_ops = {
> - .set_clock = sdhci_set_clock,
> + .set_clock = sdhci_arasan_set_clock,
> .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> .get_timeout_clock = sdhci_arasan_get_timeout_clock,
> .set_bus_width = sdhci_set_bus_width,
>
More information about the Linux-rockchip
mailing list