[PATCH v6 2/4] power: reset: add reboot mode driver
Andy Yan
andy.yan at rock-chips.com
Thu Mar 24 01:03:02 PDT 2016
Hi Krzystof:
On 2016年03月24日 10:50, Krzysztof Kozlowski wrote:
> Cool work! Few comments below.
>
>
> On Tue, Mar 22, 2016 at 8:37 PM, Andy Yan <andy.yan at rock-chips.com> wrote:
>> This driver parse the reboot commands like "reboot loader"
>> and "reboot recovery" to get a boot mode described in the
>> device tree , then call the write interfae to store the boot
>> mode in some place like special register or sram , which can
>> be read by the bootloader after system reboot, then the bootloader
>> can take different action according to the mode stored.
>>
>> This is commonly used on Android based devices, in order to
>> reboot the device into fastboot or recovery mode.
>>
>> Reviewed-by: Matthias Brugger <matthias.bgg at gmail.com>
>> Reviewed-by: Moritz Fischer <moritz.fischer at ettus.com>
>> Tested-by: John Stultz <john.stultz at linaro.org>
>> Acked-by: John Stultz <john.stultz at linaro.org>
>> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
>>
>> ---
>>
>> Changes in v6: None
>> Changes in v5:
>> - use two blank space under help in Kconfig
>> - use unsigned int instead of int for member magic in struct mode_info
>>
>> Changes in v4:
>> - make this driver depends on OF to avoid kbuild test error
>>
>> Changes in v3:
>> - scan multi properities
>> - add mask value for some platform which only use some bits of the register
>> to store boot mode magic value
>>
>> Changes in v2:
>> - move to dir drivers/power/reset/
>> - make syscon-reboot-mode a generic driver
>>
>> Changes in v1:
>> - fix the embarrassed compile warning
>> - correct the maskrom magic number
>> - check for the normal reboot
>>
>> drivers/power/reset/Kconfig | 13 ++++
>> drivers/power/reset/Makefile | 2 +
>> drivers/power/reset/reboot-mode.c | 106 +++++++++++++++++++++++++++++++
>> drivers/power/reset/reboot-mode.h | 6 ++
>> drivers/power/reset/syscon-reboot-mode.c | 65 +++++++++++++++++++
>> 5 files changed, 192 insertions(+)
>> create mode 100644 drivers/power/reset/reboot-mode.c
>> create mode 100644 drivers/power/reset/reboot-mode.h
>> create mode 100644 drivers/power/reset/syscon-reboot-mode.c
>>
>> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
>> index 1131cf7..cf50630 100644
>> --- a/drivers/power/reset/Kconfig
>> +++ b/drivers/power/reset/Kconfig
>> @@ -173,5 +173,18 @@ config POWER_RESET_ZX
>> help
>> Reboot support for ZTE SoCs.
>>
>> +config REBOOT_MODE
>> + tristate
>> +
>> +config SYSCON_REBOOT_MODE
>> + bool "Generic SYSCON regmap reboot mode driver"
>> + depends on OF
>> + select REBOOT_MODE
>> + help
>> + Say y here will enable reboot mode driver. This will
>> + get reboot mode arguments and store it in SYSCON mapped
>> + register, then the bootloader can read it to take different
>> + action according to the mode.
>> +
>> endif
>>
>> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
>> index 096fa67..a63865b 100644
>> --- a/drivers/power/reset/Makefile
>> +++ b/drivers/power/reset/Makefile
>> @@ -20,3 +20,5 @@ obj-$(CONFIG_POWER_RESET_SYSCON) += syscon-reboot.o
>> obj-$(CONFIG_POWER_RESET_SYSCON_POWEROFF) += syscon-poweroff.o
>> obj-$(CONFIG_POWER_RESET_RMOBILE) += rmobile-reset.o
>> obj-$(CONFIG_POWER_RESET_ZX) += zx-reboot.o
>> +obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o
>> +obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o
>> diff --git a/drivers/power/reset/reboot-mode.c b/drivers/power/reset/reboot-mode.c
>> new file mode 100644
>> index 0000000..9aa7b80
>> --- /dev/null
>> +++ b/drivers/power/reset/reboot-mode.c
>> @@ -0,0 +1,106 @@
>> +/*
>> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#include <linux/device.h>
>> +#include <linux/init.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/reboot.h>
>> +#include "reboot-mode.h"
>> +
>> +#define PREFIX "mode-"
>> +
>> +struct mode_info {
>> + char mode[32];
>> + unsigned int magic;
>> + struct list_head list;
>> +};
>> +
>> +struct reboot_mode_driver {
>> + struct list_head head;
>> + int (*write)(int magic);
>> + struct notifier_block reboot_notifier;
>> +};
>> +
>> +static int get_reboot_mode_magic(struct reboot_mode_driver *reboot,
>> + const char *cmd)
>> +{
>> + const char *normal = "normal";
>> + int magic = 0;
>> + struct mode_info *info;
>> +
>> + if (!cmd)
>> + cmd = normal;
>> +
>> + list_for_each_entry(info, &reboot->head, list) {
>> + if (!strcmp(info->mode, cmd)) {
>> + magic = info->magic;
>> + break;
>> + }
>> + }
>> +
>> + return magic;
> In absence of 'normal' mode (it is not described as required property)
> the magic will be '0'. It would be nice to document that in bindings.
> Imagine someone forgets about this and will wonder why 0x0 is written
> to his precious register on normal reboot...
If the magic value is '0', we won't touch the register, please see
reboot_mode_notify bellow.
> It would be nice to document that 'mode-normal' has a special
> (hard-coded) meaning.
>
>> +}
>> +
>> +static int reboot_mode_notify(struct notifier_block *this,
>> + unsigned long mode, void *cmd)
>> +{
>> + struct reboot_mode_driver *reboot;
>> + int magic;
>> +
>> + reboot = container_of(this, struct reboot_mode_driver, reboot_notifier);
>> + magic = get_reboot_mode_magic(reboot, cmd);
>> + if (magic)
>> + reboot->write(magic);
>> +
>> + return NOTIFY_DONE;
>> +}
>> +
>> +int reboot_mode_register(struct device *dev, int (*write)(int))
>> +{
>> + struct reboot_mode_driver *reboot;
>> + struct mode_info *info;
>> + struct property *prop;
>> + size_t len = strlen(PREFIX);
>> + int ret;
>> +
>> + reboot = devm_kzalloc(dev, sizeof(*reboot), GFP_KERNEL);
>> + if (!reboot)
>> + return -ENOMEM;
>> +
>> + reboot->write = write;
>> + INIT_LIST_HEAD(&reboot->head);
>> + for_each_property_of_node(dev->of_node, prop) {
>> + if (len > strlen(prop->name) || strncmp(prop->name, PREFIX, len))
>> + continue;
> New line please for readability.
Okay
>
>> + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
>> + if (!info)
>> + return -ENOMEM;
> Ditto.
Okay
>
>> + strcpy(info->mode, prop->name + len);
> Ehm, and how do you protect that name of mode is shorter than 32 characters?
How about info->mode = prop->name + len ?
>
>> + if (of_property_read_u32(dev->of_node, prop->name, &info->magic)) {
>> + dev_err(dev, "reboot mode %s without magic number\n",
>> + info->mode);
>> + devm_kfree(dev, info);
>> + continue;
>> + }
>> + list_add_tail(&info->list, &reboot->head);
>> + }
>> + reboot->reboot_notifier.notifier_call = reboot_mode_notify;
>> + ret = register_reboot_notifier(&reboot->reboot_notifier);
>> + if (ret)
>> + dev_err(dev, "can't register reboot notifier\n");
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(reboot_mode_register);
>> +
>> +MODULE_AUTHOR("Andy Yan <andy.yan at rock-chips.com");
>> +MODULE_DESCRIPTION("System reboot mode driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/power/reset/reboot-mode.h b/drivers/power/reset/reboot-mode.h
>> new file mode 100644
>> index 0000000..44ed34f
>> --- /dev/null
>> +++ b/drivers/power/reset/reboot-mode.h
>> @@ -0,0 +1,6 @@
>> +#ifndef __REBOOT_MODE_H__
>> +#define __REBOOT_MODE_H__
>> +
>> +int reboot_mode_register(struct device *dev, int (*write)(int));
> Documentation would be appreciated. Although it is local header but
> you decoupled them and you are exporting the function.
I think I should remove the EXPORT_SYMBOL_GPL.
>
>> +
>> +#endif
>> diff --git a/drivers/power/reset/syscon-reboot-mode.c b/drivers/power/reset/syscon-reboot-mode.c
>> new file mode 100644
>> index 0000000..d1521d8
>> --- /dev/null
>> +++ b/drivers/power/reset/syscon-reboot-mode.c
>> @@ -0,0 +1,65 @@
>> +/*
>> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#include <linux/init.h>
>> +#include <linux/module.h>
>> +#include <linux/kernel.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
> I don't see the need of of_address or am I missing something?
Yes, it useless, I will remove it.
>
>> +#include <linux/platform_device.h>
>> +#include <linux/reboot.h>
>> +#include <linux/regmap.h>
>> +#include <linux/mfd/syscon.h>
>> +#include "reboot-mode.h"
>> +
>> +static struct regmap *map;
>> +static u32 offset;
>> +static u32 mask = 0xffffffff;
> Why this cannot be part of state container? I suppose usually there
> will be only one reboot mode handler, but:
> 1. It is always nice to make things self-contained, so code could be
> easily used in different contexts. Depending on static variables
> prevents that.
> 2. How do you protect against double binding (two reboot mode device
> nodes in DT)? The second binding (put by mistake... or whatever
> reason) will overwrite data used by previous device.
Okay, I will make this self-contained.
>> +
>> +static int syscon_reboot_mode_write(int magic)
>> +{
>> + regmap_update_bits(map, offset, mask, magic);
>> +
>> + return 0;
> Why ignoring return value of regmap_update_bits?
Okay, I will check it.
>
>> +}
>> +
>> +static int syscon_reboot_mode_probe(struct platform_device *pdev)
>> +{
>> + int ret;
>> +
>> + map = syscon_node_to_regmap(pdev->dev.parent->of_node);
>> + if (IS_ERR(map))
>> + return PTR_ERR(map);
> Empty line for readability.
ok
>> + if (of_property_read_u32(pdev->dev.of_node, "offset", &offset))
>> + return -EINVAL;
> Empty line for readability.
ok
>
> Best regards,
> Krzysztof
>
>
>
>
More information about the Linux-rockchip
mailing list