[PATCH v3 03/10] drm/bridge: analogix_dp: correct the register bit define error in ANALOGIX_DP_PLL_REG_1

Sean Paul seanpaul at chromium.org
Thu Jun 23 07:33:17 PDT 2016


On Tue, Jun 14, 2016 at 7:46 AM, Yakir Yang <ykk at rock-chips.com> wrote:
> There're an register define error in ANALOGIX_DP_PLL_REG_1 which introduced
> by commit bcec20fd5ad6 ("drm: bridge: analogix/dp: add some rk3288 special
> registers setting").
>
> The PHY PLL input clock source is selected by ANALOGIX_DP_PLL_REG_1
> BIT 0, not BIT 1.
>
> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
> Reviewed-by: Tomasz Figa <tomasz.figa at chromium.com>
> Tested-by: Javier Martinez Canillas <javier at osg.samsung.com>

Reviewed-by: Sean Paul <seanpaul at chromium.org>

> ---
> Changes in v3:
> - Add reviewed flag from Tomasz.
>     [https://chromium-review.googlesource.com/#/c/346315/15]
> - Add tested flag from Javier
>
> Changes in v2: None
>
>  drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> index 337912b..88d56ad 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> @@ -163,8 +163,8 @@
>  #define HSYNC_POLARITY_CFG                     (0x1 << 0)
>
>  /* ANALOGIX_DP_PLL_REG_1 */
> -#define REF_CLK_24M                            (0x1 << 1)
> -#define REF_CLK_27M                            (0x0 << 1)
> +#define REF_CLK_24M                            (0x1 << 0)
> +#define REF_CLK_27M                            (0x0 << 0)
>
>  /* ANALOGIX_DP_LANE_MAP */
>  #define LANE3_MAP_LOGIC_LANE_0                 (0x0 << 6)
> --
> 1.9.1
>
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel



More information about the Linux-rockchip mailing list