[PATCH v4 0/2] Add a new Rockchip usb2 phy driver

[Heiko Stübner]

Hi Frank,

Am Dienstag, 7. Juni 2016, 17:15:52 schrieb Frank Wang:
> The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy
> IP block than rk3288 and before, and most of phy-related registers are
> also different from the past, so a new phy driver is required necessarily.
> 
> These series patches add phy-rockchip-inno-usb2.c and the corresponding
> documentation.

please see the replies on the v3 thread (regarding handling of multiple phy 
blocks) .


Thanks
Heiko

> 
> Changes in v4:
>  - Used 'phy-supply' instead of 'vbus_*-supply'.
> 
> Changes in v3:
>  - Supplemented some hardware-description into the devicetree bindings.
>  - Resolved the mapping defect between fixed value in driver and the
> property in devicetree.
>  - Code cleanup.
> 
> Changes in v2:
>  - Specified more hardware-description into the devicetree bindings.
>  - Optimized some process of driver.
> 
> Frank Wang (2):
>   Documentation: bindings: add DT documentation for Rockchip USB2PHY
>   phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy
> 
>  .../bindings/phy/phy-rockchip-inno-usb2.txt        |   62 ++
>  drivers/phy/Kconfig                                |    7 +
>  drivers/phy/Makefile                               |    1 +
>  drivers/phy/phy-rockchip-inno-usb2.c               |  614
> ++++++++++++++++++++ 4 files changed, 684 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt create
> mode 100644 drivers/phy/phy-rockchip-inno-usb2.c