[RFC PATCH 4/4] drm/rockchip: Add dmc notifier in vop driver
dbasehore .
dbasehore at chromium.org
Thu Jun 2 21:07:54 PDT 2016
On Wed, Jun 1, 2016 at 2:35 AM, Lin Huang <hl at rock-chips.com> wrote:
> when in ddr frequency scaling process, vop can not do
> enable or disable operate, since dcf will base on vop vblank
> time to do frequency scaling and need to get vop irq if there
> have vop enabled. So need register to dmc notifier, and we can
> get the dmc status.
>
> Signed-off-by: Lin Huang <hl at rock-chips.com>
> ---
> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 51 +++++++++++++++++++++++++++--
> 1 file changed, 49 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> index 1c4d5b5..7ee0cd0 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> @@ -31,6 +31,8 @@
> #include <linux/reset.h>
> #include <linux/delay.h>
>
> +#include <soc/rockchip/rockchip_dmc.h>
> +
> #include "rockchip_drm_drv.h"
> #include "rockchip_drm_gem.h"
> #include "rockchip_drm_fb.h"
> @@ -116,6 +118,9 @@ struct vop {
>
> const struct vop_data *data;
>
> + struct notifier_block dmc_nb;
> + int dmc_in_process;
> +
> uint32_t *regsbak;
> void __iomem *regs;
>
> @@ -426,14 +431,41 @@ static void vop_dsp_hold_valid_irq_disable(struct vop *vop)
> spin_unlock_irqrestore(&vop->irq_lock, flags);
> }
>
> +static int dmc_notify(struct notifier_block *nb, unsigned long event,
> + void *data)
> +{
> + struct vop *vop = container_of(nb, struct vop, dmc_nb);
> +
> + if (event == DMCFREQ_ADJUST)
> + vop->dmc_in_process = 1;
> + else if (event == DMCFREQ_FINISH)
> + vop->dmc_in_process = 0;
> +
> + return NOTIFY_OK;
> +}
> +
> static void vop_enable(struct drm_crtc *crtc)
> {
> struct vop *vop = to_vop(crtc);
> int ret;
> + int timeout_count = 500;
> + int timeout_loop = 0;
>
> if (vop->is_enabled)
> return;
>
> + /*
> + * if in dmc scaling frequency process, wait until it finish
> + * use 100ms as timeout time.
> + */
> + while (timeout_loop < timeout_count) {
> + if (vop->dmc_in_process == 0)
> + break;
> +
> + timeout_loop++;
> + usleep_range(150, 200);
> + }
wait_event with wake_up_all should work better here than using usleep_range.
> +
> ret = pm_runtime_get_sync(vop->dev);
> if (ret < 0) {
> dev_err(vop->dev, "failed to get pm runtime: %d\n", ret);
> @@ -485,6 +517,7 @@ static void vop_enable(struct drm_crtc *crtc)
> enable_irq(vop->irq);
>
> drm_crtc_vblank_on(crtc);
> + rockchip_dmc_get(&vop->dmc_nb);
>
> return;
>
> @@ -500,11 +533,25 @@ static void vop_crtc_disable(struct drm_crtc *crtc)
> {
> struct vop *vop = to_vop(crtc);
> int i;
> + int timeout_count = 500;
> + int timeout_loop = 0;
>
> if (!vop->is_enabled)
> return;
>
> /*
> + * if in dmc scaling frequency process, wait until it finish
> + * use 100ms as timeout time.
> + */
> + while (timeout_loop < timeout_count) {
> + if (vop->dmc_in_process == 0)
> + break;
> +
> + timeout_loop++;
> + usleep_range(150, 200);
> + }
> +
> + /*
> * We need to make sure that all windows are disabled before we
> * disable that crtc. Otherwise we might try to scan from a destroyed
> * buffer later.
> @@ -517,7 +564,7 @@ static void vop_crtc_disable(struct drm_crtc *crtc)
> VOP_WIN_SET(vop, win, enable, 0);
> spin_unlock(&vop->reg_lock);
> }
> -
> + rockchip_dmc_put(&vop->dmc_nb);
> drm_crtc_vblank_off(crtc);
>
> /*
> @@ -1243,7 +1290,7 @@ static int vop_create_crtc(struct vop *vop)
> ret = -ENOENT;
> goto err_cleanup_crtc;
> }
> -
> + vop->dmc_nb.notifier_call = dmc_notify;
> init_completion(&vop->dsp_hold_completion);
> init_completion(&vop->wait_update_complete);
> crtc->port = port;
> --
> 1.9.1
>
More information about the Linux-rockchip
mailing list