[PATCH] brcmfmac: sdio: Increase the default timeouts a bit

[Arend van Spriel]

On 25-01-16 11:47, Sjoerd Simons wrote:
> On a Radxa Rock2 board with a Ampak AP6335 (Broadcom 4339 core) it seems
> the card responds very quickly most of the time, unfortunately during
> initialisation it sometimes seems to take just a bit over 2 seconds to
> respond.
> 
> This results intialization failing with message like:
>   brcmf_c_preinit_dcmds: Retreiving cur_etheraddr failed, -52
>   brcmf_bus_start: failed: -52
>   brcmf_sdio_firmware_callback: dongle is not responding
> 
> Increasing the timeout to allow for a bit more headroom allows the
> card to initialize reliably.

I would prefer to know where the 2 second response time comes from.
Could be sdio retuning. Maybe the chromeos people can comment whether
this has been root caused.

There is a mmc patch pending in which retuning procedure can be deferred
by the driver. Using that API may resolve the issue as well and I would
prefer that solution.

> A quick search online after diagnosing/fixing this showed that Google
> has a similar patch in their ChromeOS tree, so this doesn't seem
> specific to the board I'm using.

As the retuning stuff is not in main line I guess we need this fix for
now so...

Acked-by: Arend van Spriel <arend at broadcom.com>
> Signed-off-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
> 
> ---
Still would like to know whether it is firmware initialization or some
mmc stack procedure. Any suggestions to debug this are welcome.

Regards,
Arend
---
> 
>  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> index dd66143..75ac4bd 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> @@ -45,8 +45,8 @@
>  #include "chip.h"
>  #include "firmware.h"
>  
> -#define DCMD_RESP_TIMEOUT	msecs_to_jiffies(2000)
> -#define CTL_DONE_TIMEOUT	msecs_to_jiffies(2000)
> +#define DCMD_RESP_TIMEOUT	msecs_to_jiffies(2500)
> +#define CTL_DONE_TIMEOUT	msecs_to_jiffies(2500)
>  
>  #ifdef DEBUG
>  
>