[PATCH v2 0/2] fix rk3066a based boards hang when cpufreq changes

[Heiko Stuebner]

Hi Andy,

Am Freitag, 15. Januar 2016, 21:23:43 schrieb Andy Yan:
> I found the rayeager board always hang in the system boot
> process or when cpufreq change. When check the BSP code[0]
> from ChipSpark, I found the current vdd_arm voltage is too
> low and so is the vdd_logic voltage, which should be modulated
> by PWM3.
> 
> So I increase the vdd_arm voltage and enabled pwm3 as a pwm
> regulator here.

applied both to my dts32 branch for 4.6

Thanks
Heiko