[PATCH v2 00/12] Add the family patches to support for kylin board

Caesar Wang wxt at rock-chips.com
Thu Jan 7 00:25:43 PST 2016 

Hi all,

Happy new year! :)
Let's go on working for happy.

This series patches are based on kernel version 4.4.0-rc8+
(Linux version 4.4.0-rc8+ (wxt at ubuntu)...#142 SMP Thu Jan 7 12:38:40 CST 2016)

This series pacthes are verified on the following github:
https://github.com/Caesar-github/rockchip/commits/kylin-develop4.4

This series has 12 patches: (12--->1)
bbd1a01 ARM: dts: Add pl330-broken-no-flushp quirk for rk3036 SoCs
fb8c1fd ARM: dts: rockchip: add the lcdc and hdmi node for rk3036
1aeb49d ARM: dts: rockchip: add the sdmmc for kylin board
3e19128 ARM: dts: rockchip: enable the uart0 for kylin board
e7de154 ARM: dts: rockchip: add the wifi/bt regulator for kylin board
8699698 ARM: dts: rockchip: enable the high speed on sdio for kylin board
21eded4 mmc: pwrseq: add support for power-on sequencing through DT
cdf3a7e mmc: pwrseq: Document optional exteral vcc for the simple power sequence
131c249 clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for sclk_i2s_out
b7ff8e1 ARM: dts: rockchip: override the clocks in i2s for kylin board
5f56af4 ARM: dts: rockchip: add the sound codec for kylin board
914d9c0 ARM: dts: rockchip: set the pinctrl default setting for rk3036 i2s
..

This series patches have the following decriptions:

PATCH[1/12-4/12]:====> Support rt5616 codec for kylin board
914d9c0 ARM: dts: rockchip: set the pinctrl default setting for rk3036 i2s
5f56af4 ARM: dts: rockchip: add the sound codec for kylin board
b7ff8e1 ARM: dts: rockchip: override the clocks in i2s for kylin board
131c249 clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for sclk_i2s_out

This patches is working for codec rt5616 on kylin board. (RK3036 SoCs)

That's needed the following rt5616 driver from Mark Brown Branch.
(cherry picked from git.kernel.org broonie/sound.git for-next)

cf94b7a UPSTREAM: ASoC: rt5616: rename some alsa control names
86f561d UPSTREAM: ASoC: rt5616: add devicetree document for rt5616
0e0f5f8 UPSTREAM: ASoC: rt5616: add an of_match table
263a330 UPSTREAM: ASoC: rt5616: Return error if device ID mismatch
0094139 UPSTREAM: ASoC: rt5616: add rt5616 codec driver

Notes:
I'm run it with the ubuntu 15.04 to set the configure.
./amixer "HP Playback Switch" 1
./amixer "HP Playback Volume" 20
./amixer "HPO MIX DAC1 Switch" 1
./amixer "OUT MIXR DAC R1 Switch" 1
./amixer "OUT MIXL DAC L1 Switch" 1
./amixer "Stereo DAC MIXR DAC R1 Switch" 1
./amixer "Stereo DAC MIXL DAC L1 Switch" 1

root at linaro-alip:/media/aplay# ./aplay pcm.wav
Playing sample: 2 ch, 48000 hz, 16 bit
..
That can be normal playing the music.
----

PATCH[5/12-9/12]: ====> Support wifi/bt module for kylin board
cdf3a7e mmc: pwrseq: Document optional exteral vcc for the simple power sequence
21eded4 mmc: pwrseq: add support for power-on sequencing through DT
8699698 ARM: dts: rockchip: enable the high speed on sdio for kylin board
e7de154 ARM: dts: rockchip: add the wifi/bt regulator for kylin board
3e19128 ARM: dts: rockchip: enable the uart0 for kylin board

The wifi/bt driver hasn't land in mainline, the driver is in here:
https://github.com/Caesar-github/rockchip/commit/1912ef4c0e358677904b0a0bbb83f9745066f0ec

wpa_supplicant -Dnl80211 -c /etc/wifi/wpa_supplicant.conf -i wlan0 -B
wpa_cli add_network
wpa_cli set_network 1 ssid \"wxt\"
wpa_cli set_network 1 psk \"123456789\"
wpa_cli select_network 1
wpa_cli save_config

ifconfig wlan0 192.168.1.105
route add default gw 192.168.1.1

root at linaro-alip:/# ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=6.83 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=184 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=9.21 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=6.84 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=11.2 ms
64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=9.24 ms
64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=12.9 ms
64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=7.02 ms
64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=24.3 ms
64 bytes from 192.168.1.1: icmp_seq=10 ttl=64 time=13.6 ms
64 bytes from 192.168.1.1: icmp_seq=11 ttl=64 time=3.87 m
...

The wifi throughput:

iperf -s -i 1
...
[  4] 116.0-117.0 sec  2.88 MBytes  24.1 Mbits/sec
[  4] 117.0-118.0 sec  2.99 MBytes  25.0 Mbits/sec
[  4] 118.0-119.0 sec  3.01 MBytes  25.2 Mbits/sec
[  4] 119.0-120.0 sec  2.89 MBytes  24.2 Mbits/sec
[  4]  0.0-120.4 sec   332 MBytes  23.1 Mbits/sec
----

PATCH[10/12]: ====> sdmmc patch for kylin board
ARM: dts: rockchip: add the sdmmc for kylin board

You should mark it "oaky" if you want to use the sdmmc.
This patch default is disabing the sdmmc since the sdmmc and
uart2(debug port) is reusing pin.
----

PATCH[11/12]: ====> hdmi/lcdc diaply patch for rk3036 dts
ARM: dts: rockchip: add the lcdc and hdmi node for rk3036

We can add this patch to support it since the Mark Yao has land
your vop support.
https://github.com/markyzq/kernel-drm-rockchip/commits/drm-rockchip-next-2015-12-28
----

PATCH[12/12]:====> DMA Patchs
ARM: dts: Add pl330-broken-no-flushp quirk for rk3036 SoCs

In order to be better read/write for emmc.
This patch is based on the following:(Fix broken DMAFLUSHP on Rockchips platform)

3055695 FROMLIST: DMA: dmaengine: expose max burst capability to clientmZ
(am from https://patchwork.kernel.org/patch/7399361/)
ed56bee FROMLIST: DMA: pl330: add quirk for broken no flushp
(am from https://patchwork.kernel.org/patch/7399371/)
0c43bc3 FROMLIST: Documentation: arm-pl330: add description of arm, pl330-broken-no-flushp
(am from https://patchwork.kernel.org/patch/7399371/)
623a699 FROMLIST: DMA: pl330: support burst mode for dev-to-mem and mem-to-dev transmit
(am from https://patchwork.kernel.org/patch/7399381/)
----


Changes in v2:
- modify the commit.
- fix the mclk-fs as the 256.
- This fix inmmc-power-sequences, as Heiko comment on
  https://patchwork.kernel.org/patch/7903161/
- As Heiko comment, modify it to fit the simple-mmc-sequence.
- Add the uart0 commit content.

Caesar Wang (12):
  ARM: dts: rockchip: set the pinctrl default setting for rk3036 i2s
  ARM: dts: rockchip: add the sound codec for kylin board
  ARM: dts: rockchip: override the clocks in i2s for kylin board
  clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for
    sclk_i2s_out
  mmc: pwrseq: Document optional exteral vcc for the simple power
    sequence
  mmc: pwrseq: add support for power-on sequencing through DT
  ARM: dts: rockchip: enable the high speed on sdio for kylin board
  ARM: dts: rockchip: add the wifi/bt regulator for kylin board
  ARM: dts: rockchip: enable the uart0 for kylin board
  ARM: dts: rockchip: add the sdmmc for kylin board
  ARM: dts: rockchip: add the lcdc and hdmi node for rk3036
  ARM: dts: Add pl330-broken-no-flushp quirk for rk3036 SoCs

 .../devicetree/bindings/mmc/mmc-pwrseq-simple.txt  |   9 ++
 arch/arm/boot/dts/rk3036-kylin.dts                 | 119 +++++++++++++++++++++
 arch/arm/boot/dts/rk3036.dtsi                      |  74 +++++++++++--
 drivers/clk/rockchip/clk-rk3036.c                  |   2 +-
 drivers/mmc/core/pwrseq_simple.c                   |  16 +++
 5 files changed, 213 insertions(+), 7 deletions(-)

-- 
1.9.1

More information about the Linux-rockchip mailing list