[PATCH v2] ARM: dts: rockchip: Adding LEDs handling via leds-gpio for the Radxa Rock2 Square

[Sjoerd Simons]

On Thu, 2015-12-31 at 10:13 +0100, Romain Perier wrote:
> Describe the two user-controllable LEDs on Rock2 Square boards.
> All information have been retrieved from the schematics and the
> vendor
> devicetree. The default-triggers mimic the behaviour of the vendor-
> kernel to
> keep functionalities in sync.
> 
> Signed-off-by: Romain Perier <romain.perier at gmail.com>

Reviewed-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>

> ---
> 
> Changes in v2:
> - Changed labels according to what is defined in the schematics
> - Added a long commit message describing this patch in details
> 
>  arch/arm/boot/dts/rk3288-rock2-square.dts | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts
> b/arch/arm/boot/dts/rk3288-rock2-square.dts
> index c5453a0..0813428 100644
> --- a/arch/arm/boot/dts/rk3288-rock2-square.dts
> +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
> @@ -56,6 +56,23 @@
>  		pinctrl-0 = <&ir_int>;
>  	};
>  
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +
> +		heartbeat {
> +			gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
> +			label = "rock2:green:state1";
> +			linux,default-trigger = "heartbeat";
> +		};
> +
> +		mmc {
> +			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
> +			label = "rock2:blue:state2";
> +			linux,default-trigger = "mmc0";
> +		};
> +	};
> +
> +
>  	sound {
>  		compatible = "simple-audio-card";
>  		simple-audio-card,name = "SPDIF";

-- 
Sjoerd Simons
Collabora Ltd.