[PATCH 2/2] arm64: dts: rockchip: add eMMC's power domain support for rk3399

Shawn Lin shawn.lin at rock-chips.com
Sun Aug 28 20:25:19 PDT 2016


On 2016/8/29 10:50, Elaine Zhang wrote:
>
>
> On 08/27/2016 11:05 PM, Shawn Lin wrote:
>> On 2016/8/27 21:41, Ziyuan Xu wrote:
>>> Control power domain for eMMC via genpd to reduce power consumption.
>>>
>>> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
>>> Signed-off-by: Ziyuan Xu <xzy.xu at rock-chips.com>
>>>
>>
>> It looks nice to me. But this should be merged after applying that[0]
>> as your patch will break bind/unbind test for sdhci-of-arasan on rk3399
>> without it[0]. Moreover, Elaine should make sure that upstreamed
>> rockchip power domain stuff would not off pd for emmc, *otherwise*, I
>> should update my patch to make sure we update clkmul every time when
>> doing suspend 2 resume..
>>
>>
> Forgot to say:
> If use pd, Although there is no call to power odd the pd_emmc,
> it will be power off when the system doing suspend 2 resume.
> (Because the system call
> __device_suspend_noirq->pm_genpd_suspend_noirq->rockchip_pd_power_off)

Thanks for explaining this. I checked the code a bit and actually I
don't need to updata clkmul since it was recorded, although it is still
reset to 0x10 reading from syscon. So for that, we can now pick it
up without waiting for my sdhci-of-arasan's update.

Reviewed-by: Shawn Lin <shawn.lin at rock-chips.com>



>
> And it's important to note:
> If the pd has been power off, some grf regs will be back to the default
> value.(which grf regs in this pd)
> So if the pd support power off , this grf regs need to save and restore
> or reinit.
> For example:
> pd_emmc
>     aclk_emmc_grf
>
> If the pd is always on,and this pd have wakeup func.
> The device need to add device_init_wakeup() to make the pd always on
> when the system doing suspend 2 resume.
>
>>
>> [0]: https://patchwork.kernel.org/patch/9300971/
>>
>>> ---
>>>
>>>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 11 +++++++++++
>>>  1 file changed, 11 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>>> b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>>> index 32aebc8..71733d4 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>>> @@ -239,6 +239,7 @@
>>>          #clock-cells = <0>;
>>>          phys = <&emmc_phy>;
>>>          phy-names = "phy_arasan";
>>> +        power-domains = <&power RK3399_PD_EMMC>;
>>>          status = "disabled";
>>>      };
>>>
>>> @@ -611,6 +612,11 @@
>>>          status = "disabled";
>>>      };
>>>
>>> +    qos_emmc: qos at ffa58000 {
>>> +        compatible = "syscon";
>>> +        reg = <0x0 0xffa58000 0x0 0x20>;
>>> +    };
>>> +
>>>      qos_hdcp: qos at ffa90000 {
>>>          compatible = "syscon";
>>>          reg = <0x0 0xffa90000 0x0 0x20>;
>>> @@ -739,6 +745,11 @@
>>>              };
>>>
>>>              /* These power domains are grouped by VD_LOGIC */
>>> +            pd_emmc at RK3399_PD_EMMC {
>>> +                reg = <RK3399_PD_EMMC>;
>>> +                clocks = <&cru ACLK_EMMC>;
>>> +                pm_qos = <&qos_emmc>;
>>> +            };
>>>              pd_vio at RK3399_PD_VIO {
>>>                  reg = <RK3399_PD_VIO>;
>>>                  #address-cells = <1>;
>>>
>>
>>
>
>
>


-- 
Best Regards
Shawn Lin




More information about the Linux-rockchip mailing list