[PATCH] ARM: dts: add rk3288-firefly-reload

[Shawn Lin]

On 2016/7/19 3:46, Heiko Stübner wrote:
> Am Montag, 18. Juli 2016, 23:32:32 schrieb Randy Li:
>> The Firefly RK3288 Reload is a combination Firefly rk3288 core board
>> with the Reload baseboard. Add a dtsi for the Firefly rk3288 core
>> which can be included into the dts for the various baseboards
>> in the future and dts for Reload base board.
>>
>> Currently supported are serial console, wired networking, eMMC and
>> SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only
>> the OTG could work on the host mode now, the other USB host can't
>> work now, additional patches are required.
>>
>> Signed-off-by: Randy Li <ayaka at soulik.info>
>> Acked-by: Rob Herring <robh at kernel.org>
>
> applied [0], after some minor reordering - please double check.
>
> Also, while the branch is named 4.8 this will only go into 4.9, as the merge-
> window supposedly opens on the weekend.

Sorry for the noise here:), but I find there is some mmc stuff
which confuse me. Maybe Randy could elaborate more?

Your sdmmc claims to support UHS-I mode like sd-uhs-sdr104, etc, which
will ask dw_mmc to switch vqmmc from 3V3 to 1V8 after sending CMD11.

But the vqmmc is vccio_sd which is fixed as 3V3? :)


>
>
> Heiko
>
> [0] https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/commit/?id=e00fdd4931ea4c47f53cba59b7a3800677546bea
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>


-- 
Best Regards
Shawn Lin