[PATCH] ARM64: dts: rockchip: add core dtsi file for RK3399 SoCs
Marc Zyngier
marc.zyngier at arm.com
Mon Apr 25 03:39:07 PDT 2016
On 25/04/16 11:06, Marc Zyngier wrote:
> On 25/04/16 10:48, Huang, Tao wrote:
>> Hi, Marc:
>> On 2016年04月21日 19:30, Marc Zyngier wrote:
>>> On Thu, 21 Apr 2016 18:47:20 +0800
>>> "Huang, Tao" <huangtao at rock-chips.com> wrote:
>>>
>>>> Hi, Mark:
>>>> On 2016年04月21日 18:19, Mark Rutland wrote:
>>>>> On Thu, Apr 21, 2016 at 11:58:12AM +0800, Jianqun Xu wrote:
>>>>>> + cpu_l0: cpu at 0 {
>>>>>> + device_type = "cpu";
>>>>>> + compatible = "arm,cortex-a53", "arm,armv8";
>>>>>> + reg = <0x0 0x0>;
>>>>>> + enable-method = "psci";
>>>>>> + #cooling-cells = <2>; /* min followed by max */
>>>>>> + clocks = <&cru ARMCLKL>;
>>>>>> + };
>>>>>> + cpu_b0: cpu at 100 {
>>>>>> + device_type = "cpu";
>>>>>> + compatible = "arm,cortex-a72", "arm,armv8";
>>>>>> + reg = <0x0 0x100>;
>>>>>> + enable-method = "psci";
>>>>>> + #cooling-cells = <2>; /* min followed by max */
>>>>>> + clocks = <&cru ARMCLKB>;
>>>>>> + };
>>>>>> +
>>>>>> + arm-pmu {
>>>>>> + compatible = "arm,armv8-pmuv3";
>>>>>> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
>>>>>> + };
>>>>> This is wrong, and must go. There should be a separate node for the PMU
>>>>> of each microarchitecture, with the appropriate compatible string to
>>>>> represent that (see the juno dts).
>>>> You are right. The first version we wrote is:
>>>> pmu_a53 {
>>>> compatible = "arm,cortex-a53-pmu";
>>>> interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
>>>> interrupt-affinity = <&cpu_l0>,
>>>> <&cpu_l1>,
>>>> <&cpu_l2>,
>>>> <&cpu_l3>;
>>>> };
>>>>
>>>> pmu_a72 {
>>>> compatible = "arm,cortex-a72-pmu";
>>>> interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
>>>> interrupt-affinity = <&cpu_b0>,
>>>> <&cpu_b1>;
>>>> };
>>>> but unfortunately, the arm pmu driver do not support PPI in two cluster
>>>> well,
>>>> so we have to replace with this implementation.
>>>>> In this case things are messier as the same PPI number is being used
>>>>> across clusters. Marc (Cc'd) has been working on PPI partitions, which
>>>>> should allow us to support that.
>>>> Great! So what we can do right now? Wait this feature, and delete
>>>> arm-pmu node?
>>> I'd rather you have a look at the patches, test them with your HW,
>>> and comment on what doesn't work!
>>>
>>> You can find the patches over there:
>>>
>>> https://lkml.org/lkml/2016/4/11/182
>>>
>>> and on the following branch:
>>>
>>> git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git
>>> irq/percpu-partition
>>
>> I tested these patches. Because our kernel is based on v4.4, so I back
>> port most changes about
>> include/linux/irqdomain.h
>> kernel/irq/irqdomain.c
>> drivers/irqchip/irq-gic-v3.c
>> and change rk3399.dtsi base on your arm,gic-v3.txt:
>>
>> gic: interrupt-controller at fee00000 {
>> compatible = "arm,gic-v3";
>> - #interrupt-cells = <3>;
>> + #interrupt-cells = <4>;
>> #address-cells = <2>;
>> #size-cells = <2>;
>> ...
>> +
>> + ppi-partitions {
>> + part0: interrupt-partition-0 {
>> + affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
>> + };
>> +
>> + part1: interrupt-partition-1 {
>> + affinity = <&cpu_b0 &cpu_b1>;
>> + };
>> + };
>>
>> and change every interrupts from three cells to four cells, such as
>> saradc: saradc at ff100000 {
>> compatible = "rockchip,rk3399-saradc";
>> reg = <0x0 0xff100000 0x0 0x100>;
>> - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>;
>> #io-channel-cells = <1>;
>> clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
>> clock-names = "saradc", "apb_pclk";
>>
>> and pmu define as:
>> pmu_a53 {
>> compatible = "arm,cortex-a53-pmu";
>> interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &part0>;
>> interrupt-affinity = <&cpu_l0>,
>> <&cpu_l1>,
>> <&cpu_l2>,
>> <&cpu_l3>;
>> };
>>
>> pmu_a72 {
>> compatible = "arm,cortex-a72-pmu", "arm,cortex-a57-pmu";
>> interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &part1>;
>> interrupt-affinity = <&cpu_b0>,
>> <&cpu_b1>;
>> };
>>
>> It can boot. And I test with Android simpleperf stat and perf top, it works!
>> So these patches work on RK3399.
>
> Good, thanks for testing.
>
>> But as I mentioned, we must change every interrupt in dts, do you think
>> this is acceptable?
>
> I can't see why not.
>
>>>
>>> Of course, you'll have to hack a bit in the PMU code to make it
>>> understand per-PMU affinity together with percpu interrupts, but it
>>> wouldn't be fun if there was nothing to do...
>> I don't change drivers/perf/arm_pmu.c, it just work.
>
> Having had a look with Mark, it may work, but it is rather unsafe. I may
> have a go at it, but I'm going to have to rely on you to test it (or you
> can send me a board ;-).
I came up with the following (untested) patch. Please let me know if this
works for you.
Thanks,
M.
>From b88c08bb689d3fe40c46788453a07ba22dae9220 Mon Sep 17 00:00:00 2001
From: Marc Zyngier <marc.zyngier at arm.com>
Date: Mon, 25 Apr 2016 11:23:54 +0100
Subject: [PATCH] drivers/perf: arm-pmu: Handle per-interrupt affinity mask
On a big-little system, PMUs can be wired to CPUs using per CPU
interrups (PPI). In this case, it is important to make sure that
the enable/disable do happen on the right set of CPUs.
Do this by querying the corresponding cpumask on the corresponding
paths
Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
---
drivers/perf/arm_pmu.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index f700908..3de5e1c 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -603,7 +603,11 @@ static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu)
irq = platform_get_irq(pmu_device, 0);
if (irq >= 0 && irq_is_percpu(irq)) {
- on_each_cpu(cpu_pmu_disable_percpu_irq, &irq, 1);
+ struct cpumask ppi_cpumask;
+
+ irq_get_percpu_devid_partition(irq, &ppi_cpumask);
+ on_each_cpu_mask(&ppi_cpumask, cpu_pmu_disable_percpu_irq,
+ &irq, 1);
free_percpu_irq(irq, &hw_events->percpu_pmu);
} else {
for (i = 0; i < irqs; ++i) {
@@ -638,6 +642,8 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
irq = platform_get_irq(pmu_device, 0);
if (irq >= 0 && irq_is_percpu(irq)) {
+ struct cpumask ppi_cpumask;
+
err = request_percpu_irq(irq, handler, "arm-pmu",
&hw_events->percpu_pmu);
if (err) {
@@ -645,7 +651,10 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
irq);
return err;
}
- on_each_cpu(cpu_pmu_enable_percpu_irq, &irq, 1);
+
+ irq_get_percpu_devid_partition(irq, &ppi_cpumask);
+ on_each_cpu_mask(&ppi_cpumask, cpu_pmu_enable_percpu_irq,
+ &irq, 1);
} else {
for (i = 0; i < irqs; ++i) {
int cpu = i;
--
2.1.4
--
Jazz is not dead. It just smells funny...
More information about the Linux-rockchip
mailing list