[PATCH 1/2] phy: Group vendor specific phy drivers

Kishon Vijay Abraham I kishon at ti.com
Wed Apr 6 05:51:54 PDT 2016


Hi,

On Friday 01 April 2016 07:05 PM, Vivek Gautam wrote:
> Hi,
> 
> 
> On Fri, Apr 1, 2016 at 6:05 AM, Kishon Vijay Abraham I <kishon at ti.com> wrote:
>> Hi,
>>
>> On Friday 01 April 2016 04:59 PM, Vivek Gautam wrote:
>>> Adding vendor specific directories in phy to group
>>> phy drivers under their respective vendor umbrella.
>>>
>>> Signed-off-by: Vivek Gautam <gautam.vivek at samsung.com>
>>> ---
>>>
>>> With growing number of phy drivers, it makes sense to
>>> group these drivers under their respective vendor/platform
>>> umbrella directory.
>>>
>>> Build-tested 'multi_v7_defconfig'.
>>>
>>>  drivers/phy/Kconfig                               | 386 +---------------------
>>>  drivers/phy/Makefile                              |  57 +---
>>>  drivers/phy/bcom/Kconfig                          |  27 ++
>>>  drivers/phy/bcom/Makefile                         |   3 +
>>>  drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c      |   0
>>>  drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c        |   0
>>>  drivers/phy/{ => bcom}/phy-brcmstb-sata.c         |   0
>>>  drivers/phy/hisi/Kconfig                          |  20 ++
>>>  drivers/phy/hisi/Makefile                         |   2 +
>>>  drivers/phy/{ => hisi}/phy-hi6220-usb.c           |   0
>>>  drivers/phy/{ => hisi}/phy-hix5hd2-sata.c         |   0
>>>  drivers/phy/marvell/Kconfig                       |  50 +++
>>>  drivers/phy/marvell/Makefile                      |   6 +
>>>  drivers/phy/{ => marvell}/phy-armada375-usb2.c    |   0
>>>  drivers/phy/{ => marvell}/phy-berlin-sata.c       |   0
>>>  drivers/phy/{ => marvell}/phy-berlin-usb.c        |   0
>>>  drivers/phy/{ => marvell}/phy-mvebu-sata.c        |   0
>>>  drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c     |   0
>>>  drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c     |   0
>>>  drivers/phy/qcom/Kconfig                          |  23 ++
>>>  drivers/phy/qcom/Makefile                         |   5 +
>>>  drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c    |   0
>>>  drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c    |   0
>>>  drivers/phy/{ => qcom}/phy-qcom-ufs-i.h           |   0
>>>  drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c    |   0
>>>  drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h    |   0
>>>  drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c    |   0
>>>  drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h    |   0
>>>  drivers/phy/{ => qcom}/phy-qcom-ufs.c             |   0
>>>  drivers/phy/rcar/Kconfig                          |  16 +
>>>  drivers/phy/rcar/Makefile                         |   2 +
>>>  drivers/phy/{ => rcar}/phy-rcar-gen2.c            |   0
>>>  drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c       |   0
>>>  drivers/phy/rockchip/Kconfig                      |  23 ++
>>>  drivers/phy/rockchip/Makefile                     |   3 +
>>>  drivers/phy/{ => rockchip}/phy-rockchip-dp.c      |   0
>>>  drivers/phy/{ => rockchip}/phy-rockchip-emmc.c    |   0
>>>  drivers/phy/{ => rockchip}/phy-rockchip-usb.c     |   0
>>>  drivers/phy/samsung/Kconfig                       |  87 +++++
>>>  drivers/phy/samsung/Makefile                      |  10 +
>>>  drivers/phy/{ => samsung}/phy-exynos-dp-video.c   |   0
>>>  drivers/phy/{ => samsung}/phy-exynos-mipi-video.c |   0
>>>  drivers/phy/{ => samsung}/phy-exynos4210-usb2.c   |   0
>>>  drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c   |   0
>>>  drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c    |   0
>>>  drivers/phy/{ => samsung}/phy-exynos5250-sata.c   |   0
>>>  drivers/phy/{ => samsung}/phy-exynos5250-usb2.c   |   0
>>>  drivers/phy/{ => samsung}/phy-s5pv210-usb2.c      |   0
>>>  drivers/phy/{ => samsung}/phy-samsung-usb2.c      |   0
>>>  drivers/phy/{ => samsung}/phy-samsung-usb2.h      |   0
>>>  drivers/phy/st/Kconfig                            |  51 +++
>>>  drivers/phy/st/Makefile                           |   6 +
>>>  drivers/phy/{ => st}/phy-miphy28lp.c              |   0
>>>  drivers/phy/{ => st}/phy-miphy365x.c              |   0
>>>  drivers/phy/{ => st}/phy-spear1310-miphy.c        |   0
>>>  drivers/phy/{ => st}/phy-spear1340-miphy.c        |   0
>>>  drivers/phy/{ => st}/phy-stih407-usb.c            |   0
>>>  drivers/phy/{ => st}/phy-stih41x-usb.c            |   0
>>>  drivers/phy/sunxi/Kconfig                         |  28 ++
>>>  drivers/phy/sunxi/Makefile                        |   2 +
>>>  drivers/phy/{ => sunxi}/phy-sun4i-usb.c           |   0
>>>  drivers/phy/{ => sunxi}/phy-sun9i-usb.c           |   0
>>>  drivers/phy/ti/Kconfig                            |  67 ++++
>>>  drivers/phy/ti/Makefile                           |   6 +
>>>  drivers/phy/{ => ti}/phy-dm816x-usb.c             |   0
>>>  drivers/phy/{ => ti}/phy-omap-control.c           |   0
>>>  drivers/phy/{ => ti}/phy-omap-usb2.c              |   0
>>>  drivers/phy/{ => ti}/phy-ti-pipe3.c               |   0
>>>  drivers/phy/{ => ti}/phy-tusb1210.c               |   0
>>>  drivers/phy/{ => ti}/phy-twl4030-usb.c            |   0
>>>  drivers/phy/{ => ti}/ulpi_phy.h                   |   0
>>
>> ulpi_phy.h is not specific to TI though at this point tusb1210 is the only ULPI
>> driver.
> 
> Yes, you are right. But i was hesitant to add a multi-level header
> file include in the phy driver
> which uses it.
> 
> Does it makes sense to move this ulpi_phy.h to include/linux/phy ?

yeah.. that should be okay.
> 
>>>  71 files changed, 464 insertions(+), 416 deletions(-)
>>>  create mode 100644 drivers/phy/bcom/Kconfig
>>>  create mode 100644 drivers/phy/bcom/Makefile
>>>  rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%)
>>>  rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%)
>>>  rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%)
>>>  create mode 100644 drivers/phy/hisi/Kconfig
>>>  create mode 100644 drivers/phy/hisi/Makefile
>>>  rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%)
>>>  rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%)
>>>  create mode 100644 drivers/phy/marvell/Kconfig
>>>  create mode 100644 drivers/phy/marvell/Makefile
>>>  rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%)
>>>  rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%)
>>>  rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%)
>>>  rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%)
>>>  rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%)
>>>  rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%)
>>>  create mode 100644 drivers/phy/qcom/Kconfig
>>>  create mode 100644 drivers/phy/qcom/Makefile
>>>  rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%)
>>>  rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%)
>>>  rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%)
>>>  rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%)
>>>  rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%)
>>>  rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%)
>>>  rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%)
>>>  rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%)
>>>  create mode 100644 drivers/phy/rcar/Kconfig
>>>  create mode 100644 drivers/phy/rcar/Makefile
>>>  rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%)
>>>  rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%)
>>>  create mode 100644 drivers/phy/rockchip/Kconfig
>>>  create mode 100644 drivers/phy/rockchip/Makefile
>>>  rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%)
>>>  rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%)
>>>  rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%)
>>>  create mode 100644 drivers/phy/samsung/Kconfig
>>>  create mode 100644 drivers/phy/samsung/Makefile
>>>  rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
>>>  rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
>>>  rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
>>>  rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
>>>  rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
>>>  rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
>>>  rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
>>>  rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
>>>  rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
>>>  rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
>>>  create mode 100644 drivers/phy/st/Kconfig
>>>  create mode 100644 drivers/phy/st/Makefile
>>>  rename drivers/phy/{ => st}/phy-miphy28lp.c (100%)
>>>  rename drivers/phy/{ => st}/phy-miphy365x.c (100%)
>>>  rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%)
>>>  rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%)
>>>  rename drivers/phy/{ => st}/phy-stih407-usb.c (100%)
>>>  rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%)
>>>  create mode 100644 drivers/phy/sunxi/Kconfig
>>>  create mode 100644 drivers/phy/sunxi/Makefile
>>>  rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%)
>>>  rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%)
>>>  create mode 100644 drivers/phy/ti/Kconfig
>>>  create mode 100644 drivers/phy/ti/Makefile
>>>  rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%)
>>>  rename drivers/phy/{ => ti}/phy-omap-control.c (100%)
>>>  rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%)
>>>  rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%)
>>>  rename drivers/phy/{ => ti}/phy-tusb1210.c (100%)
>>>  rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%)
>>>  rename drivers/phy/{ => ti}/ulpi_phy.h (100%)
>>>
>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>>> index 26566db..80c8c68 100644
>>> --- a/drivers/phy/Kconfig
>>> +++ b/drivers/phy/Kconfig
>>> @@ -15,45 +15,6 @@ config GENERIC_PHY
>>>         phy users can obtain reference to the PHY. All the users of this
>>>         framework should select this config.
>>>
>>
>>> +menuconfig PHY_PLAT
>>> +     bool "Platform Phy drivers"
>>
>> Not really convinced about adding a new config here. This will create new
>> dependencies and will also start breaking users of oldconfig.
> 
> This serves including all the directory paths in the 'make' for
> driver/phy/Makefile.
> 
> Otherwise each directory will have to be built as per particular platform
> And, not all drivers of a vendor are built for one-kind of platform,
> for example, Samsung uses ARCH_EXYNOS, as well as ARCH_S5PV210
> Similarly, Broadcom phy drivers are based on multiple platforms, and so
> does Marvell's.
> 
> Please suggest a concise way to include the vendor directories in the build path
> in drivers/phy/Makefile.

obj-y	+= vendor/?

-Kishon

> 
>>
>> Also not all of them are platform drivers (e.g ULPI PHY drivers).
> I Think this applies to ulpi_phy only at this moment, which we can resolve
> by moving that to include/linux path.
> 
>>
>> Thanks
>> Kishon
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 
> 



More information about the Linux-rockchip mailing list