[PATCH v1 1/3] ARM: dts: rockchip: add core rk3036 dts
Xing Zheng
zhengxing at rock-chips.com
Thu Sep 17 01:51:53 PDT 2015
On 2015年08月28日 16:59, Heiko Stuebner wrote:
> Hi,
>
> Am Freitag, 28. August 2015, 13:46:46 schrieb Xing Zheng:
>> Initial release for rk3036, node definitions rk3036 sdk board.
>>
>> Signed-off-by: Xing Zheng<zhengxing at rock-chips.com>
>> ---
>>
>> Changes in v1: None
>>
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/rk3036-sdk.dts | 362
>> ++++++++++++++++++++++++++++++++++++++ 2 files changed, 363 insertions(+)
> as Eddie already said, please split into two files ... just look at the other
> Rockchip socs for inspiration :-)
Done.
>> create mode 100644 arch/arm/boot/dts/rk3036-sdk.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 6d7cec1..7014a3b 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -501,6 +501,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
>> rk3066a-bqcurie2.dtb \
>> rk3066a-marsboard.dtb \
>> rk3066a-rayeager.dtb \
>> + rk3036-sdk.dtb \
>> rk3188-radxarock.dtb \
>> rk3288-evb-act8846.dtb \
>> rk3288-evb-rk808.dtb \
>> diff --git a/arch/arm/boot/dts/rk3036-sdk.dts
>> b/arch/arm/boot/dts/rk3036-sdk.dts new file mode 100644
>> index 0000000..0149c9a
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/rk3036-sdk.dts
>> @@ -0,0 +1,362 @@
>> +/*
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + * a) This file is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> + * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> + * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> + * conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include<dt-bindings/gpio/gpio.h>
>> +#include<dt-bindings/interrupt-controller/irq.h>
>> +#include<dt-bindings/interrupt-controller/arm-gic.h>
>> +#include<dt-bindings/pinctrl/rockchip.h>
>> +#include<dt-bindings/clock/rk3036-cru.h>
>> +#include "skeleton.dtsi"
>> +
>> +/ {
>> + compatible = "rockchip,rk3036";
>> +
>> + interrupt-parent =<&gic>;
>> +
>> + aliases {
>> + serial0 =&uart0;
>> + serial1 =&uart1;
>> + serial2 =&uart2;
>> + };
>> +
>> + memory {
>> + reg =<0x60000000 0x40000000>;
> missing
> device_type = "memory";
Done.
>
>> + };
>> +
>> + arm-pmu {
>> + compatible = "arm,cortex-a7-pmu";
>> + interrupts =<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
>> +<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> missing interrupt-affinity to map irq->cpu_core ?
Done.
>> + };
>> +
>> + cpus {
>> + #address-cells =<1>;
>> + #size-cells =<0>;
>> + //enable-method = "rockchip,rk3066-smp";
> please don't leave commented code around
>
Done.
>> +
>> + cpu at f00 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg =<0xf00>;
>> + operating-points =<
>> + /* KHz uV */
>> + 816000 1000000
>> + >;
>> + #cooling-cells =<2>; /* min followed by max */
>> + clock-latency =<40000>;
>> + clocks =<&cru ARMCLK>;
>> + resets =<&cru SRST_CORE0>;
>> + };
>> + cpu at f01 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg =<0xf01>;
>> + resets =<&cru SRST_CORE1>;
>> + };
>> + };
>> +
>> + amba {
>> + compatible = "arm,amba-bus";
>> + #address-cells =<1>;
>> + #size-cells =<1>;
>> + ranges;
>> +
>> + pdma: pdma at 20078000 {
>> + compatible = "arm,pl330", "arm,primecell";
>> + reg =<0x20078000 0x4000>;
>> + interrupts =<GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
>> +<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
>> + #dma-cells =<1>;
>> + clocks =<&cru ACLK_DMAC2>;
>> + clock-names = "apb_pclk";
>> + };
> indentation of the dma controller looks wrong
>
In my opnion, it seems ok, where is it wrong?
Thanks.
>> + };
>> +
>> + xin24m: oscillator {
>> + compatible = "fixed-clock";
>> + clock-frequency =<24000000>;
>> + clock-output-names = "xin24m";
>> + #clock-cells =<0>;
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv7-timer";
>> + arm,cpu-registers-not-fw-configured;
>> + interrupts =<GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_HIGH)>,
>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_HIGH)>;
>
> please provide all 4 irqs (secure, non-secure, virtual and hypervisor)
Done, but I don't quite understand.
>> + clock-frequency =<24000000>;
>> + always-on;
>> + };
>> +
>> + cru: clock-controller at 20000000 {
>> + compatible = "rockchip,rk3036-cru";
>> + reg =<0x20000000 0x1000>;
>> + rockchip,grf =<&grf>;
>> + #clock-cells =<1>;
>> + #reset-cells =<1>;
>> + assigned-clocks =<&cru PLL_GPLL>;
>> + assigned-clock-rates =<594000000>;
>> + };
>> +
>> + uart0: serial at 20060000 {
>> + compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
>> + reg =<0x20060000 0x100>;
>> + interrupts =<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
>> + reg-shift =<2>;
>> + reg-io-width =<4>;
>> + clock-frequency =<24000000>;
>> + clocks =<&cru SCLK_UART0>,<&cru PCLK_UART0>;
>> + clock-names = "baudclk", "apb_pclk";
>> + pinctrl-names = "default";
>> + pinctrl-0 =<&uart0_xfer&uart0_cts&uart0_rts>;
>> + };
>> +
>> + uart1: serial at 20064000 {
>> + compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
>> + reg =<0x20064000 0x100>;
>> + interrupts =<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
>> + reg-shift =<2>;
>> + reg-io-width =<4>;
>> + clock-frequency =<24000000>;
>> + clocks =<&cru SCLK_UART1>,<&cru PCLK_UART1>;
>> + clock-names = "baudclk", "apb_pclk";
>> + pinctrl-names = "default";
>> + pinctrl-0 =<&uart1_xfer>;
>> + };
>> +
>> + uart2: serial at 20068000 {
>> + compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
>> + reg =<0x20068000 0x100>;
>> + interrupts =<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
>> + reg-shift =<2>;
>> + reg-io-width =<4>;
>> + clock-frequency =<24000000>;
>> + clocks =<&cru SCLK_UART2>,<&cru PCLK_UART2>;
>> + clock-names = "baudclk", "apb_pclk";
>> + pinctrl-names = "default";
>> + pinctrl-0 =<&uart2_xfer>;
>> + };
>> +
>> + pwm0: pwm at 20050000 {
>> + compatible = "rockchip,rk2928-pwm";
>> + reg =<0x20050000 0x10>;
>> + #pwm-cells =<3>;
>> + pinctrl-names = "default";
>> + pinctrl-0 =<&pwm0_pin>;
>> + clocks =<&cru PCLK_PWM>;
>> + clock-names = "pwm";
>> + status = "disabled";
>> + };
>> +
>> + pwm1: pwm at 20050010 {
>> + compatible = "rockchip,rk2928-pwm";
>> + reg =<0x20050010 0x10>;
>> + #pwm-cells =<3>;
>> + pinctrl-names = "default";
>> + pinctrl-0 =<&pwm1_pin>;
>> + clocks =<&cru PCLK_PWM>;
>> + clock-names = "pwm";
>> + status = "disabled";
>> + };
>> +
>> + pwm2: pwm at 20050020 {
>> + compatible = "rockchip,rk2928-pwm";
>> + reg =<0x20050020 0x10>;
>> + #pwm-cells =<3>;
>> + pinctrl-names = "default";
>> + pinctrl-0 =<&pwm2_pin>;
>> + clocks =<&cru PCLK_PWM>;
>> + clock-names = "pwm";
>> + status = "disabled";
>> + };
>> +
>> + pwm3: pwm at 20050030 {
>> + compatible = "rockchip,rk2928-pwm";
>> + reg =<0x20050030 0x10>;
>> + #pwm-cells =<2>;
>> + pinctrl-names = "default";
>> + pinctrl-0 =<&pwm3_pin>;
>> + clocks =<&cru PCLK_PWM>;
>> + clock-names = "pwm";
>> + status = "disabled";
>> + };
>> +
>> + sram at 10080000 {
>> + compatible = "mmio-sram";
>> + reg =<0x10080000 0x2000>;
>> + map-exec;
>> + };
>> +
>> + gic: interrupt-controller at 10139000 {
>> + compatible = "arm,gic-400";
>> + interrupt-controller;
>> + #interrupt-cells =<3>;
>> + #address-cells =<0>;
>> +
>> + reg =<0x10139000 0x1000>,
>> + <0x1013a000 0x1000>;
> please also provide the vgic registers and interrupt
Done, but I checked GIC_SPEC.pdf and I'm not sure it is correct...
>> + };
>> +
>> + grf: syscon at 20008000 {
>> + compatible = "rockchip,rk3036-grf", "syscon";
>> + reg =<0x20008000 0x1000>;
>> + };
>> +
>> + pinctrl: pinctrl {
>> + compatible = "rockchip,rk3036-pinctrl";
>> + rockchip,grf =<&grf>;
>> + #address-cells =<1>;
>> + #size-cells =<1>;
>> + ranges;
>> +
>> + gpio0: gpio0 at 2007c000 {
>> + compatible = "rockchip,gpio-bank";
>> + reg = <0x2007c000 0x100>;
> please use a space after the "=" in "reg =<..."
Done.
>> + interrupts =<GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks =<&cru PCLK_GPIO0>;
>> +
>> + gpio-controller;
>> + #gpio-cells =<2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells =<2>;
>> + };
>> +
>> + gpio1: gpio1 at 20080000 {
>> + compatible = "rockchip,gpio-bank";
>> + reg =<0x20080000 0x100>;
>> + interrupts =<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks =<&cru PCLK_GPIO1>;
>> +
>> + gpio-controller;
>> + #gpio-cells =<2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells =<2>;
>> + };
>> +
>> + gpio2: gpio2 at 20084000 {
>> + compatible = "rockchip,gpio-bank";
>> + reg =<0x20084000 0x100>;
>> + interrupts =<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks =<&cru PCLK_GPIO2>;
>> +
>> + gpio-controller;
>> + #gpio-cells =<2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells =<2>;
>> + };
>> +
>> + pcfg_pull_up: pcfg-pull-up {
>> + bias-pull-up;
>> + };
>> +
>> + pcfg_pull_down: pcfg-pull-down {
>> + bias-pull-down;
>> + };
>> +
>> + pcfg_pull_none: pcfg-pull-none {
>> + bias-disable;
>> + };
>> +
>> + pcfg_pull_none_12ma: pcfg-pull-none-12ma {
>> + bias-disable;
>> + drive-strength =<12>;
>> + };
> The rk3036 iomux does not have a per-pin drive-strength setting it seems, so
> at the moment the pinctrl driver does not support changing the drive-strength,
> so this node should probably be dropped. It seems unused anyway.
Done.
>> +
>> + uart0 {
>> + uart0_xfer: uart0-xfer {
>> + rockchip,pins =<0 16 RK_FUNC_1&pcfg_pull_none>,
>> + <0 17 RK_FUNC_1&pcfg_pull_none>;
>> + };
>> +
>> + uart0_cts: uart0-cts {
>> + rockchip,pins =<0 18 RK_FUNC_1&pcfg_pull_none>;
>> + };
>> +
>> + uart0_rts: uart0-rts {
>> + rockchip,pins =<0 19 RK_FUNC_1&pcfg_pull_none>;
>> + };
>> + };
>> +
>> + uart1 {
>> + uart1_xfer: uart1-xfer {
>> + rockchip,pins =<2 22 RK_FUNC_1&pcfg_pull_none>,
>> + <2 23 RK_FUNC_1&pcfg_pull_none>;
>> + };
>> + /* no rts / cts for uart1 */
>> + };
>> +
>> + uart2 {
>> + uart2_xfer: uart2-xfer {
>> + rockchip,pins =<1 18 RK_FUNC_2
>> &pcfg_pull_none>, +<1 19
>> RK_FUNC_2&pcfg_pull_none>; + };
>> + /* no rts / cts for uart2 */
>> + };
>> +
>> + pwm0 {
>> + pwm0_pin: pwm0-pin {
>> + rockchip,pins =<0 0 RK_FUNC_2&pcfg_pull_none>;
>> + };
>> + };
>> +
>> + pwm1 {
>> + pwm1_pin: pwm1-pin {
>> + rockchip,pins =<0 1 RK_FUNC_2&pcfg_pull_none>;
>> + };
>> + };
>> +
>> + pwm2 {
>> + pwm2_pin: pwm2-pin {
>> + rockchip,pins =<0 1 2&pcfg_pull_none>;
>> + };
>> + };
>> +
>> + pwm3 {
>> + pwm3_pin: pwm3-pin {
>> + rockchip,pins =<0 27 1&pcfg_pull_none>;
>> + };
>> + };
>> + };
>> +};
>
More information about the Linux-rockchip
mailing list