[PATCH v4 08/16] drm: rockchip/dp: add rockchip platform dp driver
Heiko Stuebner
heiko at sntech.de
Tue Sep 1 14:00:09 PDT 2015
Hi Yakir,
Am Dienstag, 1. September 2015, 14:01:28 schrieb Yakir Yang:
> Rockchip have three clocks for dp controller, we leave pclk_edp
> to analogix_dp driver control, and keep the sclk_edp_24m and
> sclk_edp in platform driver.
>
> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
> ---
> Changes in v4:
> - Remove some deprecated DT properties in rockchip dp document.
>
> Changes in v3:
> - Take Thierry Reding and Heiko suggest, leave "sclk_edp_24m" to rockchip
> dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp
> core driver which name to "dp", and leave "pclk_edp" to rockchip dp
> platform driver which name to "pclk".
> - Take Heiko suggest, add devicetree binding document.
> - Take Heiko suggest, remove "rockchip,panel" DT property, take use of
> remote point to get panel node.
> - Add the new function point analogix_dp_platdata.get_modes init.
>
> Changes in v2:
> - Take Heiko suggest, get panel node with remote-endpoint method,
> and create devicetree binding for driver.
> - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
> leave those clock to rockchip dp phy driver.
>
> .../bindings/video/analogix_dp-rockchip.txt | 74 ++++
> drivers/gpu/drm/rockchip/Kconfig | 9 +
> drivers/gpu/drm/rockchip/Makefile | 1 +
> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 389
> +++++++++++++++++++++ 4 files changed, 473 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt create
> mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>
> diff --git
> a/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
> b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt new file
> mode 100644
> index 0000000..502483e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
> @@ -0,0 +1,74 @@
> +Rockchip RK3288 specific extensions to the Analogix Display Port
> +================================
> +
> +Required properties:
> +- compatible: "rockchip,rk3288-edp";
> +
> +- reg: physical base address of the controller and length
> +
> +- clocks: from common clock binding: handle to dp clock.
> + of memory mapped region.
> +
> +- clock-names: from common clock binding:
> + Required elements: "dp" "pclk"
> +
> +- resets: Must contain an entry for each entry in reset-names.
> + See ../reset/reset.txt for details.
> +
> +- reset-names: Must include the name "dp"
> +
> +- rockchip,grf: this soc should set GRF regs, so need get grf here.
> +
> +- ports: contain a port node with endpoint definitions as defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +
> +For the below properties, please refer to Analogix DP binding document:
> + * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
> +- phys (required)
> +- phy-names (required)
> +- hpd-gpios (optional)
> +---------------------------------------------------------------------------
> ---- +
> +Example:
> + dp-controller: dp at ff970000 {
> + compatible = "rockchip,rk3288-dp";
> + reg = <0xff970000 0x4000>;
> + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
> + clock-names = "dp", "pclk";
> + phys = <&dp_phy>;
> + phy-names = "dp";
> +
> + rockchip,grf = <&grf>;
> + resets = <&cru 111>;
> + reset-names = "dp";
> +
> + status = "disabled";
> +
> + ports {
#address-cells = <1>;
#size-cells = <0>;
> + edp_in: port {
edp_in: port at 0
reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + edp_in_vopb: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&vopb_out_edp>;
> + };
> + edp_in_vopl: endpoint at 1 {
> + reg = <1>;
> + remote-endpoint = <&vopl_out_edp>;
> + };
> + };
> +
> + edp_out: port at 1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + edp_out_panel: endpoint {
> + reg = <0>;
> + remote-endpoint = <&panel_in_edp>
> + };
> + };
> + };
> + };
> +
> diff --git a/drivers/gpu/drm/rockchip/Kconfig
> b/drivers/gpu/drm/rockchip/Kconfig index 35215f6..c2ba945 100644
> --- a/drivers/gpu/drm/rockchip/Kconfig
> +++ b/drivers/gpu/drm/rockchip/Kconfig
> @@ -25,3 +25,12 @@ config ROCKCHIP_DW_HDMI
> for the Synopsys DesignWare HDMI driver. If you want to
> enable HDMI on RK3288 based SoC, you should selet this
> option.
> +
> +config ROCKCHIP_ANALOGIX_DP
> + tristate "Rockchip specific extensions for Analogix DP driver"
> + depends on DRM_ROCKCHIP
> + select DRM_ANALOGIX_DP
> + help
> + This selects support for Rockchip SoC specific extensions
> + for the Analogix Core DP driver. If you want to enable DP
> + on RK3288 based SoC, you should selet this option.
> diff --git a/drivers/gpu/drm/rockchip/Makefile
> b/drivers/gpu/drm/rockchip/Makefile index f3d8a19..8ad01fb 100644
> --- a/drivers/gpu/drm/rockchip/Makefile
> +++ b/drivers/gpu/drm/rockchip/Makefile
> @@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o
> rockchip_drm_fbdev.o \ rockchip_drm_gem.o
>
> obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
> +obj-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
>
> obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c new file mode 100644
> index 0000000..cebff9e
> --- /dev/null
> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> @@ -0,0 +1,389 @@
> +/*
> + * Rockchip SoC DP (Display Port) interface driver.
> + *
> + * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
> + * Author: Andy Yan <andy.yan at rock-chips.com>
> + * Yakir Yang <ykk at rock-chips.com>
> + * Jeff Chen <jeff.chen at rock-chips.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +#include <drm/drmP.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_dp_helper.h>
> +
> +#include <linux/component.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_graph.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +#include <linux/clk.h>
> +
> +#include <video/of_videomode.h>
> +#include <video/videomode.h>
> +
> +#include <drm/bridge/analogix_dp.h>
> +
> +#include "rockchip_drm_drv.h"
> +#include "rockchip_drm_vop.h"
> +
> +#define encoder_to_dp(c) \
> + container_of(c, struct rockchip_dp_device, encoder)
> +
> +#define plat_data_to_dp(pd) \
> + container_of(pd, struct rockchip_dp_device, plat_data)
> +
> +/* dp grf register offset */
> +#define GRF_GPIO7B_IOMUX 0x0070
> +#define GPIO7B3_SEL_MASK (0x03 << 6)
> +#define GPIO7B3_SEL_EDP_HOTPLUG BIT(7)
please remove, see comment near pre_init
> +
> +#define GRF_SOC_CON6 0x025c
> +#define GRF_EDP_LCD_SEL_MASK BIT(5)
> +#define GRF_EDP_SEL_VOP_LIT BIT(5)
> +#define GRF_EDP_SEL_VOP_BIG 0
> +
> +struct rockchip_dp_device {
> + struct drm_device *drm_dev;
> + struct device *dev;
> + struct drm_encoder encoder;
> + struct drm_display_mode mode;
> +
> + struct clk *pclk;
> + struct regmap *grf;
> + struct reset_control *rst;
> +
> + struct analogix_dp_plat_data plat_data;
> +};
> +
> +static int rockchip_dp_pre_init(struct rockchip_dp_device *dp)
> +{
> + u32 val;
> + int ret;
> +
> + val = GPIO7B3_SEL_EDP_HOTPLUG | (GPIO7B3_SEL_MASK << 16);
> + ret = regmap_write(dp->grf, GRF_GPIO7B_IOMUX, val);
this is just a regular pinctrl setting. Please don't write onto other
components registers. Use a regular pinctrl setting in the devicetree instead.
> + if (ret != 0) {
> + dev_err(dp->dev, "Could not config GRF edp hpd: %d\n", ret);
> + return ret;
> + }
> +
> + reset_control_assert(dp->rst);
> + usleep_range(10, 20);
> + reset_control_deassert(dp->rst);
> +
> + return 0;
> +}
Heiko
More information about the Linux-rockchip
mailing list