[PATCH 1/3] clk: add flag for clocks that need to be enabled on rate changes

[Heiko Stübner]

Hi,

any comment on these 3 patches?

Thanks
Heiko

Am Freitag, 21. August 2015, 19:46:31 schrieb Heiko Stuebner:
> Some clocks need to be enabled to accept rate changes. This patch adds a
> new flag CLK_SET_RATE_UNGATE that lets clk_change_rate enable the clock
> before trying to change the rate and disable it again afterwards.
> This of course doesn't effect clocks that are already running at that
> point, as their refcount will only temporarily increase.
> 
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> ---
>  drivers/clk/clk.c            | 18 ++++++++++++++++++
>  include/linux/clk-provider.h |  1 +
>  2 files changed, 19 insertions(+)
> 
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 28cd923..564f11e 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -1438,6 +1438,15 @@ static void clk_change_rate(struct clk_core *core)
>  	else if (core->parent)
>  		best_parent_rate = core->parent->rate;
> 
> +	if (core->flags & CLK_SET_RATE_UNGATE) {
> +		unsigned long flags;
> +
> +		clk_core_prepare(core);
> +		flags = clk_enable_lock();
> +		clk_core_enable(core);
> +		clk_enable_unlock(flags);
> +	}
> +
>  	if (core->new_parent && core->new_parent != core->parent) {
>  		old_parent = __clk_set_parent_before(core, core->new_parent);
>  		trace_clk_set_parent(core, core->new_parent);
> @@ -1464,6 +1473,15 @@ static void clk_change_rate(struct clk_core *core)
> 
>  	core->rate = clk_recalc(core, best_parent_rate);
> 
> +	if (core->flags & CLK_SET_RATE_UNGATE) {
> +		unsigned long flags;
> +
> +		flags = clk_enable_lock();
> +		clk_core_disable(core);
> +		clk_enable_unlock(flags);
> +		clk_core_unprepare(core);
> +	}
> +
>  	if (core->notifier_count && old_rate != core->rate)
>  		__clk_notify(core, POST_RATE_CHANGE, old_rate, core->rate);
> 
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index 3ecc07d..21e0025 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -31,6 +31,7 @@
>  #define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate change
> */ #define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk
> accuracy */ #define CLK_RECALC_NEW_RATES	BIT(9) /* recalc rates after
> notifications */ +#define CLK_SET_RATE_UNGATE	BIT(10) /* clock needs to run
> to set rate */
> 
>  struct clk;
>  struct clk_hw;