[PATCH v7 0/6] Build and support rk3036 SoC platform

Heiko Stübner heiko at sntech.de
Mon Nov 23 16:03:01 PST 2015


Hi Xing Zheng,

Am Donnerstag, 5. November 2015, 15:33:54 schrieb Xing Zheng:
> Hi,
>   We need to support rk3036 soc platform via upstream, there are
> some primary parts for the initial release of minimum system: dts,
> clk-pll, smp, and clock tree for rk3036, and additional, we can use
> these startup and run to init processs.

[...]

after talking with Mike and agreeing that I'm again taking the regular
clock patches to them, I've applied all of this to appropriate branches.
I did some cosmetics, as explained below.


> Xing Zheng (6):
>   dt-bindings: add documentation of rk3036 clock controller
>   clk: rockchip: add dt-binding header for rk3036
>   clk: rockchip: add new pll-type for rk3036 and similar socs
- wrapped some overly long lines, otherwise this is similar to what
  Stephen already took for the rk3066-pll-type.


>   clk: rockchip: add clock controller for rk3036
>   ARM: dts: rockchip: add core rk3036 dts
- split off the evb into a separate patch
- reordered some nodes (please order by the address (the @xxxxxxxx)
- reordered some properties
- fixed the gic cpu masks


>   ARM: dts: enable smp for rk3036
folded into the core dtsi addition


Please take a final look at [0] to make sure I didn't mess up anything.


Thanks
Heiko


[0]
https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-clk/next
https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.5-armsoc/dts32



More information about the Linux-rockchip mailing list