[PATCH v5 1/2] usb: dwc2: host: Add missing spinlock in dwc2_hcd_reset_func()

[John Youn]

On 11/20/2015 9:06 AM, Douglas Anderson wrote:
> The dwc2_hcd_reset_func() function is only ever called directly by a
> delayed work function.  As such no locks are already held when the
> function is called.
> 
> Doing a read-modify-write of CPU registers and setting fields in the
> main hsotg data structure is a bad idea without locks.  Let's add
> locks.
> 
> The bug was found by code inspection only.  It turns out that the
> dwc2_hcd_reset_func() is only ever called today if the
> "host_support_fs_ls_low_power" parameter is enabled and no code in
> mainline enables that parameter.  Thus no known issues in mainline are
> fixed by this patch, but it's still probably wise to fix the function.
> 
> Signed-off-by: Douglas Anderson <dianders at chromium.org>
> ---
> Changes in v5:
> - New for v5 of the series
> 
>  drivers/usb/dwc2/hcd.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
> index 42b6c5127618..e8924cecc83a 100644
> --- a/drivers/usb/dwc2/hcd.c
> +++ b/drivers/usb/dwc2/hcd.c
> @@ -2357,13 +2357,19 @@ static void dwc2_hcd_reset_func(struct work_struct *work)
>  {
>  	struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
>  						reset_work.work);
> +	unsigned long flags;
>  	u32 hprt0;
>  
>  	dev_dbg(hsotg->dev, "USB RESET function called\n");
> +
> +	spin_lock_irqsave(&hsotg->lock, flags);
> +
>  	hprt0 = dwc2_read_hprt0(hsotg);
>  	hprt0 &= ~HPRT0_RST;
>  	dwc2_writel(hprt0, hsotg->regs + HPRT0);
>  	hsotg->flags.b.port_reset_change = 1;
> +
> +	spin_unlock_irqrestore(&hsotg->lock, flags);
>  }
>  
>  /*
> 

Acked-by: John Youn <johnyoun at synopsys.com>

John