[PATCH v2 08/13] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver

[Rob Herring]

On Sat, Oct 31, 2015 at 08:56:04PM +0800, Chris Zhong wrote:
> add device tree bindings for rk3288 specific Synopsys DW MIPI DSI driver
> 
> Signed-off-by: Chris Zhong <zyw at rock-chips.com>
> ---
> 
> Changes in v2: None
> 
>  .../bindings/video/dw_mipi_dsi_rockchip.txt        | 56 ++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
> new file mode 100644
> index 0000000..4dea804
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt

Please move to bindings/display/rockchip/


> @@ -0,0 +1,56 @@
> +Rockchip specific extensions to the Synopsys Designware MIPI DSI
> +================================
> +
> +Required properties:
> +- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
> +- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
> +- ports: contain a port node with endpoint definitions as defined in [1].
> +  For vopb,set the reg = <0> and set the reg = <1> for vopl.
> +
> +For more required properties, please refer to [2].
> +
> +[1] Documentation/devicetree/bindings/media/video-interfaces.txt
> +[2] Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt

This needs to be updated too.

> +
> +Example:
> +	mipi_dsi: mipi at ff960000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
> +		reg = <0xff960000 0x4000>;
> +		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
> +		clock-names = "ref", "pclk";
> +		rockchip,grf = <&grf>;
> +		status = "okay";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +
> +			mipi_in: port {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				mipi_in_vopb: endpoint at 0 {
> +					reg = <0>;
> +					remote-endpoint = <&vopb_out_mipi>;
> +				};
> +				mipi_in_vopl: endpoint at 1 {
> +					reg = <1>;
> +					remote-endpoint = <&vopl_out_mipi>;
> +				};
> +			};
> +		};
> +
> +		panel {
> +			compatible ="boe,tv080wum-nl0";
> +			reg = <0>;
> +
> +			enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&lcd_en>;
> +			backlight = <&backlight>;
> +			status = "okay";
> +		};
> +	};
> -- 
> 2.6.2
>