[PATCH 1/2] ARM: rockchip: decrease the wait time for resume

[Chris Zhong]

On 03/03/2015 04:47 AM, Heiko Stuebner wrote:
> Am Montag, 9. Februar 2015, 21:12:22 schrieb Chris Zhong:
>> The delay time for wait the 24MHz OSC stabilization is 750ms, and the
>> delay time for wait the external PMU stabilization is 750ms too, let's
>> decrease them to 30ms.
> just to understand whats happening here:
>
> The default delay time for wait the 24MHz OSC and PMU stabilization is 750ms,
> = reset value in the register and your patch is decreasing this to 30ms.
>
> Are the new 30ms for each of the two long enough in all cases?
Yes, the 30ms are safe for wait them to stabilization.

>
> Heiko
>
>
>> Signed-off-by: Chris Zhong <zyw at rock-chips.com>
>> ---
>>
>>   arch/arm/mach-rockchip/pm.c | 3 +++
>>   arch/arm/mach-rockchip/pm.h | 4 ++++
>>   2 files changed, 7 insertions(+)
>>
>> diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
>> index 50cb781..a3ab397 100644
>> --- a/arch/arm/mach-rockchip/pm.c
>> +++ b/arch/arm/mach-rockchip/pm.c
>> @@ -209,6 +209,9 @@ static int rk3288_suspend_init(struct device_node *np)
>>   	memcpy(rk3288_bootram_base, rockchip_slp_cpu_resume,
>>   	       rk3288_bootram_sz);
>>
>> +	regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, OSC_STABL_CNT_THRESH);
>> +	regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, PMU_STABL_CNT_THRESH);
>> +
>>   	return 0;
>>   }
>>
>> diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h
>> index 7d752ff..96beaa0 100644
>> --- a/arch/arm/mach-rockchip/pm.h
>> +++ b/arch/arm/mach-rockchip/pm.h
>> @@ -57,6 +57,10 @@ void __init rockchip_suspend_init(void);
>>   /* PMU_WAKEUP_CFG1 bits */
>>   #define PMU_ARMINT_WAKEUP_EN		BIT(0)
>>
>> +/* wait 30ms for OSC stable and 30ms for pmic stable */
>> +#define OSC_STABL_CNT_THRESH	(32 * 30)
>> +#define PMU_STABL_CNT_THRESH	(32 * 30)
>> +
>>   enum rk3288_pwr_mode_con {
>>   	PMU_PWR_MODE_EN = 0,
>>   	PMU_CLK_CORE_SRC_GATE_EN,
>
>
>