[PATCH v14 2/3] power-domain: rockchip: add power domain driver
Ulf Hansson
ulf.hansson at linaro.org
Thu Jun 25 08:33:56 PDT 2015
[...]
>>> +#include <linux/clk-provider.h>
>>
>> clk-provider.h, why?
>
>
> The following is needed.
>
> _clk_get_name(clk)
I see, you need it for for the dev_dbg().
I think you shall use "%pC" as the formatting string for the dev_dbg()
message, since that will take care of printing the clock name for you.
[...]
>>> +static int rockchip_pd_power(struct rockchip_pm_domain *pd, bool
>>> power_on)
>>> +{
>>> + int i;
>>> +
>>> + mutex_lock(&pd->pmu->mutex);
>>
>> I don't quite understand why you need a lock, what are you protecting and
>> why?
>
>
> Says:
> [ 3551.678762] mali ffa30000.gpu: starting device in power domain 'pd_gpu'
> [ 3551.899180] mali ffa30000.gpu: stopping device in power domain 'pd_gpu'
> [ 3551.905958] mali ffa30000.gpu: starting device in power domain 'pd_gpu'
> [ 3551.912832] mali ffa30000.gpu: stopping device in power domain 'pd_gpu'
> [ 3551.919730] rockchip_pd_power:139: mutex_lock
> [ 3551.924130] rockchip_pd_power:167,mutex_unlock
> [ 3563.827295] rockchip_pd_power:139: mutex_lock
> [ 3563.831753] rockchip_pd_power:167,mutex_unlock
> [ 3563.836216] mali ffa30000.gpu: starting device in power domain 'pd_gpu'
> [ 3564.058989] mali ffa30000.gpu: stopping device in power domain 'pd_gpu'
> [ 3564.065659] mali ffa30000.gpu: starting device in power domain 'pd_gpu'
> [ 3564.072354] mali ffa30000.gpu: stopping device in power domain 'pd_gpu'
> [ 3564.079047] rockchip_pd_power:139: mutex_lock
> [ 3564.083426] rockchip_pd_power:167,mutex_unlock
> [ 3611.665726] rockchip_pd_power:139: mutex_lock
> [ 3611.670206] rockchip_pd_power:167,mutex_unlock
> [ 3611.674692] mali ffa30000.gpu: starting device in power domain 'pd_gpu'
> [ 3611.899160] mali ffa30000.gpu: stopping device in power domain 'pd_gpu'
> [ 3611.905938] mali ffa30000.gpu: starting device in power domain 'pd_gpu'
> [ 3611.912818] mali ffa30000.gpu: stopping device in power domain 'pd_gpu'
> [ 3611.919689] rockchip_pd_power:139: mutex_lock
> [ 3611.924090] rockchip_pd_power:167,mutex_unlock
> [ 3623.848296] rockchip_pd_power:139: mutex_lock
> [ 3623.852752] rockchip_pd_power:167,mutex_unlock
>
>
>
>
>>> +
>>> + if (rockchip_pmu_domain_is_on(pd) != power_on) {
>>> + for (i = 0; i < pd->num_clks; i++)
>>> + clk_enable(pd->clks[i]);
>>> +
>>> + if (!power_on) {
>>> + /* FIXME: add code to save AXI_QOS */
>>> +
>>> + /* if powering down, idle request to NIU first */
>>> + rockchip_pmu_set_idle_request(pd, true);
>>> + }
>>> +
>>> + rockchip_do_pmu_set_power_domain(pd, power_on);
>>> +
>>> + if (power_on) {
>>> + /* if powering up, leave idle mode */
>>> + rockchip_pmu_set_idle_request(pd, false);
>>> +
>>> + /* FIXME: add code to restore AXI_QOS */
>>> + }
>>> +
>>> + for (i = pd->num_clks - 1; i >= 0; i--)
>>> + clk_disable(pd->clks[i]);
>>> + }
>>> +
>>> + mutex_unlock(&pd->pmu->mutex);
>>> + return 0;
>>> +}
>>> +
>>> +static int rockchip_pd_power_on(struct generic_pm_domain *domain)
>>> +{
>>> + struct rockchip_pm_domain *pd = to_rockchip_pd(domain);
>>> +
>>> + return rockchip_pd_power(pd, true);
>>> +}
>>> +
>>> +static int rockchip_pd_power_off(struct generic_pm_domain *domain)
>>> +{
>>> + struct rockchip_pm_domain *pd = to_rockchip_pd(domain);
>>> +
>>> + return rockchip_pd_power(pd, false);
>>> +}
>>> +
>>> +static int rockchip_pd_attach_dev(struct generic_pm_domain *genpd,
>>> + struct device *dev)
>>> +{
>>> + struct clk *clk;
>>> + int i;
>>> + int error;
>>> +
>>> + dev_dbg(dev, "attaching to power domain '%s'\n", genpd->name);
>>> +
>>> + error = pm_clk_create(dev);
>>> + if (error) {
>>> + dev_err(dev, "pm_clk_create failed %d\n", error);
>>> + return error;
>>> + }
>>> +
>>> + i = 0;
>>> + while ((clk = of_clk_get(dev->of_node, i++)) && !IS_ERR(clk)) {
>>
>> This loop adds all available device clocks to the PM clock list. I
>> wonder if this could be considered as a common thing and if so, we
>> might want to extend the pm_clk API with this.
>
>
> There are several reasons as follows:
>
> Firstly, the clocks need be turned off to save power when
> the system enter the suspend state. So we need to enumerate the clocks
> in the dts. In order to power domain can turn on and off.
>
> Secondly, the reset-circuit should reset be synchronous on rk3288, then
> sync revoked.
> So we need to enable clocks of all devices.
I think you misinterpreted my previous answer. Instead of fetching all
clocks for a device and manually create the pm_clk list as you do
here, I was suggesting to make this a part of the pm clk API.
I would happily support such an API, but I can't tell what the other
maintainers think.
>
>>> + dev_dbg(dev, "adding clock '%s' to list of PM clocks\n",
>>> + __clk_get_name(clk));
>>> + error = pm_clk_add_clk(dev, clk);
>>> + clk_put(clk);
>>> + if (error) {
>>> + dev_err(dev, "pm_clk_add_clk failed %d\n",
>>> error);
>>> + pm_clk_destroy(dev);
>>> + return error;
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
[...]
>>> +
>>> +static int rockchip_pm_add_one_domain(struct rockchip_pmu *pmu,
>>> + struct device_node *node)
>>> +{
>>> + const struct rockchip_domain_info *pd_info;
>>> + struct rockchip_pm_domain *pd;
>>> + struct clk *clk;
>>> + int clk_cnt;
>>> + int i;
>>> + u32 id;
>>> + int error;
>>> +
>>> + error = of_property_read_u32(node, "reg", &id);
>>> + if (error) {
>>> + dev_err(pmu->dev,
>>> + "%s: failed to retrieve domain id (reg): %d\n",
>>> + node->name, error);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + if (id >= pmu->info->num_domains) {
>>> + dev_err(pmu->dev, "%s: invalid domain id %d\n",
>>> + node->name, id);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + pd_info = &pmu->info->domain_info[id];
>>> + if (!pd_info) {
>>> + dev_err(pmu->dev, "%s: undefined domain id %d\n",
>>> + node->name, id);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + clk_cnt = of_count_phandle_with_args(node, "clocks",
>>> "#clock-cells");
>>> + pd = devm_kzalloc(pmu->dev,
>>> + sizeof(*pd) + clk_cnt * sizeof(pd->clks[0]),
>>> + GFP_KERNEL);
>>> + if (!pd)
>>> + return -ENOMEM;
>>> +
>>> + pd->info = pd_info;
>>> + pd->pmu = pmu;
>>> +
>>> + for (i = 0; i < clk_cnt; i++) {
>>
>> This loop is similar to the one when creates the PM clock list in the
>> rockchip_pd_attach_dev().
>>
>> What's the reason you don't want to use pm clk for these clocks?
>>
>
> Ditto.
I don't follow. Can't you do the exact same thing via the pm clk API,
can you please elaborate!?
>
>>> + clk = of_clk_get(node, i);
>>> + if (IS_ERR(clk)) {
>>> + error = PTR_ERR(clk);
>>> + dev_err(pmu->dev,
>>> + "%s: failed to get clk %s (index %d):
>>> %d\n",
>>> + node->name, __clk_get_name(clk), i,
>>> error);
>>> + goto err_out;
>>> + }
>>> +
>>> + error = clk_prepare(clk);
>>> + if (error) {
>>> + dev_err(pmu->dev,
>>> + "%s: failed to prepare clk %s (index %d):
>>> %d\n",
>>> + node->name, __clk_get_name(clk), i,
>>> error);
>>> + clk_put(clk);
>>> + goto err_out;
>>> + }
>>> +
>>> + pd->clks[pd->num_clks++] = clk;
>>> +
>>> + dev_dbg(pmu->dev, "added clock '%s' to domain '%s'\n",
>>> + __clk_get_name(clk), node->name);
>>> + }
>>> +
>>> + error = rockchip_pd_power(pd, true);
>>> + if (error) {
>>> + dev_err(pmu->dev,
>>> + "failed to power on domain '%s': %d\n",
>>> + node->name, error);
>>> + goto err_out;
>>> + }
>>> +
>>> + pd->genpd.name = node->name;
>>> + pd->genpd.power_off = rockchip_pd_power_off;
>>> + pd->genpd.power_on = rockchip_pd_power_on;
>>> + pd->genpd.attach_dev = rockchip_pd_attach_dev;
>>> + pd->genpd.detach_dev = rockchip_pd_detach_dev;
>>> + pd->genpd.dev_ops.start = rockchip_pd_start_dev;
>>> + pd->genpd.dev_ops.stop = rockchip_pd_stop_dev;
>>
>> Instead of assigning the ->stop|start() callbacks, which do
>> pm_clk_suspend|resume(), just set the genpd->flags to
>> GENPD_FLAG_PM_CLK, and genpd will fix this for you.
>>
> Ditto.
Again, I don't follow. Here is what goes on:
rockchip_pd_start_dev() calls pm_clk_resume() and
rockchip_pd_stop_dev() calls pm_clk_suspend().
Instead of assigning the below callbacks...
pd->genpd.dev_ops.start = rockchip_pd_start_dev;
pd->genpd.dev_ops.stop = rockchip_pd_stop_dev;
... just use GENPD_FLAG_PM_CLK and let genpd deal with the calls to
pm_clk_suspend|resume().
>
>
>>> + pm_genpd_init(&pd->genpd, NULL, false);
>>> +
>>> + pmu->genpd_data.domains[id] = &pd->genpd;
>>> + return 0;
>>> +
>>> +err_out:
>>> + while (--i >= 0) {
>>> + clk_unprepare(pd->clks[i]);
>>> + clk_put(pd->clks[i]);
>>> + }
>>> + return error;
>>> +}
>>> +
[...]
Kind regards
Uffe
More information about the Linux-rockchip
mailing list