[PATCH 0/9] i2c: add generic support for timing parameters in DT

[Wolfram Sang]

Here is a patch series adding better DT support for timing parameters like the
raise time or the fall time which are generic for the I2C subsystem. There is a
core function for parsing and an implementation for the RCar driver how to use
it.

I added people of the designware and rk3x driver to CC because they might be
interested in this new function. They provided the basis for this series, so it
should be easy to convert them.

Please have a look, test, comment...

Thanks,

    Wolfram


Changes since RFC:
* better tested
* added documentation for the new function and the new struct
* reworded some commit messages slightly
* moved the new property in the dtsi above the "status" property


Wolfram Sang (9):
  i2c: document generic DT bindings for timing parameters
  i2c: add generic routine to parse DT for timing information
  i2c: rcar: refactor probe function a little
  i2c: rcar: switch to i2c generic dt parsing
  i2c: rcar: honor additional i2c timings from DT
  ARM: shmobile: r8a7790: dtsi: add internal delay for i2c IPs
  ARM: shmobile: r8a7791: dtsi: add internal delay for i2c IPs
  ARM: shmobile: r8a7794: dtsi: add internal delay for i2c IPs
  arm64: renesas: r8a7795: add internal delay for i2c IPs

 Documentation/devicetree/bindings/i2c/i2c-rcar.txt |  4 ++
 Documentation/devicetree/bindings/i2c/i2c.txt      | 31 ++++++++--
 arch/arm/boot/dts/r8a7790.dtsi                     |  4 ++
 arch/arm/boot/dts/r8a7791.dtsi                     |  6 ++
 arch/arm/boot/dts/r8a7794.dtsi                     |  6 ++
 arch/arm64/boot/dts/renesas/r8a7795.dtsi           |  7 +++
 drivers/i2c/busses/i2c-rcar.c                      | 67 +++++++++++-----------
 drivers/i2c/i2c-core.c                             | 50 ++++++++++++++++
 include/linux/i2c.h                                | 22 +++++++
 9 files changed, 158 insertions(+), 39 deletions(-)

-- 
2.1.4