[PATCH] ARM: dts: Add SPI nodes to rk3288

Heiko Stübner heiko at sntech.de
Tue Sep 9 01:24:13 PDT 2014


Am Freitag, 5. September 2014, 09:53:11 schrieb Doug Anderson:
> From: huang lin <hl at rock-chips.com>
> 
> This adds basic SPI nodes to the base rk3288 device tree file.
> 
> A few notes:
> * It's assumed that most users of the SPI ports are using chip select
>   0.  Thus the default pinctrl for the ports enables chip select 0
>   (but not chip select 1 on ports that have it).  If a board wants to
>   use chip select 1 or wants a GPIO chip select the board should
>   override the pinctrl (just like boards can override UART pinctrl if
>   they have hardware flow control).
> * Since SPI DMA support appears broken and the SPI works fine without
>   DMA we don't include the DMA references.  That can come in a later
>   change.

Added to my dts branch with the one small change described below


> 
> Signed-off-by: huang lin <hl at rock-chips.com>
> Signed-off-by: Doug Anderson <dianders at chromium.org>
> ---
> 
>  arch/arm/boot/dts/rk3288.dtsi | 92
> +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 92
> insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 5f866e0..75d1f4c 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -34,6 +34,9 @@
>  		serial2 = &uart2;
>  		serial3 = &uart3;
>  		serial4 = &uart4;
> +		spi0 = &spi0;
> +		spi1 = &spi1;
> +		spi2 = &spi2;
>  	};
> 
>  	cpus {
> @@ -128,6 +131,45 @@
>  		status = "disabled";
>  	};
> 
> +	spi0: spi at ff110000 {
> +		compatible = "rockchip,rk3066-spi";

I've changed the compatibles to the one defined in the binding, aka
	"rockchip,rk3288-spi", "rockchip,rk3066-spi"


> +		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
> +		clock-names = "spiclk", "apb_pclk";
> +		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
> +		reg = <0xff110000 0x1000>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		status = "disabled";
> +	};
> +
> +	spi1: spi at ff120000 {
> +		compatible = "rockchip,rk3066-spi";
> +		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
> +		clock-names = "spiclk", "apb_pclk";
> +		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
> +		reg = <0xff120000 0x1000>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		status = "disabled";
> +	};
> +
> +	spi2: spi at ff130000 {
> +		compatible = "rockchip,rk3066-spi";
> +		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
> +		clock-names = "spiclk", "apb_pclk";
> +		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
> +		reg = <0xff130000 0x1000>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		status = "disabled";
> +	};
> +
>  	i2c1: i2c at ff140000 {
>  		compatible = "rockchip,rk3288-i2c";
>  		reg = <0xff140000 0x1000>;
> @@ -700,6 +742,56 @@
>  			};
>  		};
> 
> +		spi0 {
> +			spi0_clk: spi0-clk {
> +				rockchip,pins = <5 12 RK_FUNC_1 &pcfg_pull_up>;
> +			};
> +			spi0_cs0: spi0-cs0 {
> +				rockchip,pins = <5 13 RK_FUNC_1 &pcfg_pull_up>;
> +			};
> +			spi0_tx: spi0-tx {
> +				rockchip,pins = <5 14 RK_FUNC_1 &pcfg_pull_up>;
> +			};
> +			spi0_rx: spi0-rx {
> +				rockchip,pins = <5 15 RK_FUNC_1 &pcfg_pull_up>;
> +			};
> +			spi0_cs1: spi0-cs1 {
> +				rockchip,pins = <5 16 RK_FUNC_1 &pcfg_pull_up>;
> +			};
> +		};
> +		spi1 {
> +			spi1_clk: spi1-clk {
> +				rockchip,pins = <7 12 RK_FUNC_2 &pcfg_pull_up>;
> +			};
> +			spi1_cs0: spi1-cs0 {
> +				rockchip,pins = <7 13 RK_FUNC_2 &pcfg_pull_up>;
> +			};
> +			spi1_rx: spi1-rx {
> +				rockchip,pins = <7 14 RK_FUNC_2 &pcfg_pull_up>;
> +			};
> +			spi1_tx: spi1-tx {
> +				rockchip,pins = <7 15 RK_FUNC_2 &pcfg_pull_up>;
> +			};
> +		};
> +
> +		spi2 {
> +			spi2_cs1: spi2-cs1 {
> +				rockchip,pins = <8 3 RK_FUNC_1 &pcfg_pull_up>;
> +			};
> +			spi2_clk: spi2-clk {
> +				rockchip,pins = <8 6 RK_FUNC_1 &pcfg_pull_up>;
> +			};
> +			spi2_cs0: spi2-cs0 {
> +				rockchip,pins = <8 7 RK_FUNC_1 &pcfg_pull_up>;
> +			};
> +			spi2_rx: spi2-rx {
> +				rockchip,pins = <8 8 RK_FUNC_1 &pcfg_pull_up>;
> +			};
> +			spi2_tx: spi2-tx {
> +				rockchip,pins = <8 9 RK_FUNC_1 &pcfg_pull_up>;
> +			};
> +		};
> +
>  		uart0 {
>  			uart0_xfer: uart0-xfer {
>  				rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>,




More information about the Linux-rockchip mailing list