[PATCH] usb: dwc2: add bus suspend/resume for dwc2

[Romain Perier]

Hi Kever,

2014-10-31 15:02 GMT+01:00 Kever Yang <kever.yang at rock-chips.com>:
> This patch adds suspend/resume for dwc2 hcd controller.
>

Could you add a more explicit and detailed message ? It is redundant
with the commit subject and explains almost the same thing.

> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> ---
>
>  drivers/usb/dwc2/hcd.c | 74 ++++++++++++++++++++++++++++++++++++++++++--------
>  1 file changed, 63 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
> index fa49c72..df68449 100644
> --- a/drivers/usb/dwc2/hcd.c
> +++ b/drivers/usb/dwc2/hcd.c
> @@ -1473,6 +1473,29 @@ static void dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
>         }
>  }
>
> +static void dwc2_port_resume(struct dwc2_hsotg *hsotg)
> +{
> +       u32 hprt0;
> +
> +       /* After clear the Stop PHY clock bit, we should wait for a moment
> +        * for PLL work stable with clock output.
> +        */
> +       writel(0, hsotg->regs + PCGCTL);
> +       usleep_range(2000, 4000);
> +
> +       hprt0 = dwc2_read_hprt0(hsotg);
> +       hprt0 |= HPRT0_RES;
> +       writel(hprt0, hsotg->regs + HPRT0);
> +       hprt0 &= ~HPRT0_SUSP;
> +       /* according to USB2.0 Spec 7.1.7.7, the host most send the resume
> +        * signal for at least 20ms
> +        */

Typo here, most => must .

> +       usleep_range(20000, 25000);
> +
> +       hprt0 &= ~HPRT0_RES;
> +       writel(hprt0, hsotg->regs + HPRT0);
> +}
> +
>  /* Handles hub class-specific requests */
>  static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
>                                 u16 wvalue, u16 windex, char *buf, u16 wlength)
> @@ -1518,17 +1541,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
>                 case USB_PORT_FEAT_SUSPEND:
>                         dev_dbg(hsotg->dev,
>                                 "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
> -                       writel(0, hsotg->regs + PCGCTL);
> -                       usleep_range(20000, 40000);
> -
> -                       hprt0 = dwc2_read_hprt0(hsotg);
> -                       hprt0 |= HPRT0_RES;
> -                       writel(hprt0, hsotg->regs + HPRT0);
> -                       hprt0 &= ~HPRT0_SUSP;
> -                       usleep_range(100000, 150000);
> -
> -                       hprt0 &= ~HPRT0_RES;
> -                       writel(hprt0, hsotg->regs + HPRT0);
> +                       dwc2_port_resume(hsotg);
>                         break;
>
>                 case USB_PORT_FEAT_POWER:
> @@ -2301,6 +2314,42 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd)
>         usleep_range(1000, 3000);
>  }
>
> +static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
> +{
> +       struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
> +       u32 hprt0;
> +
> +       if (hsotg->op_state != OTG_STATE_B_HOST)
> +               return 0;
> +
> +       if (hsotg->lx_state != DWC2_L0)
> +               return 0;
> +
> +       hprt0 = dwc2_read_hprt0(hsotg);
> +       if (hprt0 & HPRT0_CONNSTS)
> +               dwc2_port_suspend(hsotg, 1);
> +
> +       return 0;
> +}
> +
> +static int _dwc2_hcd_resume(struct usb_hcd *hcd)
> +{
> +       struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
> +       u32 hprt0;
> +
> +       if (hsotg->op_state != OTG_STATE_B_HOST)
> +               return 0;
> +
> +       if (hsotg->lx_state != DWC2_L2)
> +               return 0;
> +
> +       hprt0 = dwc2_read_hprt0(hsotg);
> +       if ((hprt0 | HPRT0_CONNSTS) && (hprt0 | HPRT0_SUSP))
> +               dwc2_port_resume(hsotg);
> +
> +       return 0;
> +}
> +
>  /* Returns the current frame number */
>  static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd)
>  {
> @@ -2671,6 +2720,9 @@ static struct hc_driver dwc2_hc_driver = {
>         .hub_status_data = _dwc2_hcd_hub_status_data,
>         .hub_control = _dwc2_hcd_hub_control,
>         .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete,
> +
> +       .bus_suspend = _dwc2_hcd_suspend,
> +       .bus_resume = _dwc2_hcd_resume,

These functions should be defined and registered conditionnally under
#ifdef CONFIG_PM.

Romain