[PATCH] mmc: dw_mmc: add a quirk for the defferent bit of sdio interrupt
Addy Ke
addy.ke at rock-chips.com
Wed Oct 29 19:21:19 PDT 2014
This patch add a quirk: DW_MCI_QUIRK_SDIO_INT_24BIT.
The bit of sdio interrupt is 16 in designware implementation, but
is 24 in RK3288. To support RK3288 mmc controller, we need add
a quirk for it.
Signed-off-by: Addy Ke <addy.ke at rock-chips.com>
---
drivers/mmc/host/dw_mmc.c | 32 +++++++++++++++++++++++++++-----
drivers/mmc/host/dw_mmc.h | 1 +
include/linux/mmc/dw_mmc.h | 2 ++
3 files changed, 30 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 69f0cc6..db29621 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -778,6 +778,12 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
u32 div;
u32 clk_en_a;
u32 sdmmc_cmd_bits = SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT;
+ u32 sdio_int_bit;
+
+ if (host->quirks & DW_MCI_QUIRK_SDIO_INT_24BIT)
+ sdio_int_bit = SDMMC_INT_SDIO_24BIT(slot->id);
+ else
+ sdio_int_bit = SDMMC_INT_SDIO(slot->id);
/* We must continue to set bit 28 in CMD until the change is complete */
if (host->state == STATE_WAITING_CMD11_DONE)
@@ -819,7 +825,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
/* enable clock; only low power if no SDIO */
clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
- if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id)))
+ if (!(mci_readl(host, INTMASK) & sdio_int_bit))
clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
mci_writel(host, CLKENA, clk_en_a);
@@ -1167,6 +1173,12 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
struct dw_mci_slot *slot = mmc_priv(mmc);
struct dw_mci *host = slot->host;
u32 int_mask;
+ u32 sdio_int_bit;
+
+ if (host->quirks & DW_MCI_QUIRK_SDIO_INT_24BIT)
+ sdio_int_bit = SDMMC_INT_SDIO_24BIT(slot->id);
+ else
+ sdio_int_bit = SDMMC_INT_SDIO(slot->id);
/* Enable/disable Slot Specific SDIO interrupt */
int_mask = mci_readl(host, INTMASK);
@@ -1180,10 +1192,10 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
dw_mci_disable_low_power(slot);
mci_writel(host, INTMASK,
- (int_mask | SDMMC_INT_SDIO(slot->id)));
+ (int_mask | sdio_int_bit));
} else {
mci_writel(host, INTMASK,
- (int_mask & ~SDMMC_INT_SDIO(slot->id)));
+ (int_mask & ~sdio_int_bit));
}
}
@@ -2035,8 +2047,15 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
/* Handle SDIO Interrupts */
for (i = 0; i < host->num_slots; i++) {
struct dw_mci_slot *slot = host->slot[i];
- if (pending & SDMMC_INT_SDIO(i)) {
- mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i));
+ u32 sdio_int_bit;
+
+ if (host->quirks & DW_MCI_QUIRK_SDIO_INT_24BIT)
+ sdio_int_bit = SDMMC_INT_SDIO_24BIT(i);
+ else
+ sdio_int_bit = SDMMC_INT_SDIO(i);
+
+ if (pending & sdio_int_bit) {
+ mci_writel(host, RINTSTS, sdio_int_bit);
mmc_signal_sdio_irq(slot->mmc);
}
}
@@ -2452,6 +2471,9 @@ static struct dw_mci_of_quirks {
}, {
.quirk = "disable-wp",
.id = DW_MCI_QUIRK_NO_WRITE_PROTECT,
+ }, {
+ .quirk = "sdio-int-24bit",
+ .id = DW_MCI_QUIRK_SDIO_INT_24BIT,
},
};
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 01b99e8..6a48015 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -92,6 +92,7 @@
#define SDMMC_CTYPE_4BIT BIT(0)
#define SDMMC_CTYPE_1BIT 0
/* Interrupt status & mask register defines */
+#define SDMMC_INT_SDIO_24BIT(n) BIT(24 + (n))
#define SDMMC_INT_SDIO(n) BIT(16 + (n))
#define SDMMC_INT_EBE BIT(15)
#define SDMMC_INT_ACD BIT(14)
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 0013669..6d4669e 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -217,6 +217,8 @@ struct dw_mci_dma_ops {
#define DW_MCI_QUIRK_BROKEN_CARD_DETECTION BIT(3)
/* No write protect */
#define DW_MCI_QUIRK_NO_WRITE_PROTECT BIT(4)
+/* In RK3288, the bit of sdio interrupt is 24 */
+#define DW_MCI_QUIRK_SDIO_INT_24BIT BIT(5)
/* Slot level quirks */
/* This slot has no write protect */
--
1.8.3.2
More information about the Linux-rockchip
mailing list