[PATCH v4 5/6] ARM: rockchip: Add pmu-sram binding

[Doug Anderson]

Chris,

On Tue, Oct 21, 2014 at 4:26 PM, Chris Zhong <zyw at rock-chips.com> wrote:
> The pmu-sram is used to store resume code, suspend/resume need get the
> address of it. Therefore add a binding and documentation for it.
>
> Signed-off-by: Tony Xie <xxx at rock-chips.com>
> Signed-off-by: Chris Zhong <zyw at rock-chips.com>
> ---
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
>  .../devicetree/bindings/arm/rockchip/pmu-sram.txt  |   15 +++++++++++++++
>  1 file changed, 15 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt b/Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt
> new file mode 100644
> index 0000000..77284c0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt
> @@ -0,0 +1,15 @@
> +Rockchip SRAM for pmu:
> +------------------------------
> +
> +The sram of pmu is used to store the function of resume from maskrom(the 1st
> +level loader).

It's probably best in this document to say that this is a common use
of the "pmu-sram" because it keeps power even in low power states in
the system.  ...this SRAM could be used for other things as well.


> +Required node properties:
> +- compatible : should be "rockchip,rk3288-pmu-sram"
> +- reg : physical base address and the size of the registers window
> +
> +Example:
> +       pmu_intmem at ff720000 {
> +               compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
> +               reg = <0xff720000 0x4000>;

As with the other patch, should probably change the size in the
example to 0x1000 (4K).

Otherwise this looks good to me.

-Doug