[PATCH 2/2] spi/rockchip: fix bug that cause spi transfer timed out in DMA duplex mode
Addy Ke
addy.ke at rock-chips.com
Wed Oct 15 04:26:18 PDT 2014
In rx mode, dma must be prepared before spi is enabled.
But in tx and tr mode, spi must be enabled first.
Signed-off-by: Addy Ke <addy.ke at rock-chips.com>
---
drivers/spi/spi-rockchip.c | 34 +++++++++++++++++++++++-----------
1 file changed, 23 insertions(+), 11 deletions(-)
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 3044c6c..153269b 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -328,6 +328,8 @@ static int rockchip_spi_unprepare_message(struct spi_master *master,
spin_unlock_irqrestore(&rs->lock, flags);
+ spi_enable_chip(rs, 0);
+
return 0;
}
@@ -384,6 +386,8 @@ static int rockchip_spi_pio_transfer(struct rockchip_spi *rs)
if (rs->tx)
wait_for_idle(rs);
+ spi_enable_chip(rs, 0);
+
return 0;
}
@@ -395,8 +399,10 @@ static void rockchip_spi_dma_rxcb(void *data)
spin_lock_irqsave(&rs->lock, flags);
rs->state &= ~RXBUSY;
- if (!(rs->state & TXBUSY))
+ if (!(rs->state & TXBUSY)) {
+ spi_enable_chip(rs, 0);
spi_finalize_current_transfer(rs->master);
+ }
spin_unlock_irqrestore(&rs->lock, flags);
}
@@ -512,8 +518,6 @@ static void rockchip_spi_config(struct rockchip_spi *rs)
div = max_t(u32, rs->max_freq / rs->speed, 1);
div = (div + 1) & 0xfffe;
- spi_enable_chip(rs, 0);
-
writel_relaxed(cr0, rs->regs + ROCKCHIP_SPI_CTRLR0);
writel_relaxed(rs->len - 1, rs->regs + ROCKCHIP_SPI_CTRLR1);
@@ -527,8 +531,6 @@ static void rockchip_spi_config(struct rockchip_spi *rs)
spi_set_clk(rs, div);
dev_dbg(rs->dev, "cr0 0x%x, div %d\n", cr0, div);
-
- spi_enable_chip(rs, 1);
}
static int rockchip_spi_transfer_one(
@@ -536,7 +538,7 @@ static int rockchip_spi_transfer_one(
struct spi_device *spi,
struct spi_transfer *xfer)
{
- int ret = 0;
+ int ret = 1;
struct rockchip_spi *rs = spi_master_get_devdata(master);
WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) &&
@@ -568,17 +570,27 @@ static int rockchip_spi_transfer_one(
rs->tmode = CR0_XFM_RO;
/* we need prepare dma before spi was enabled */
- if (master->can_dma && master->can_dma(master, spi, xfer)) {
+ if (master->can_dma && master->can_dma(master, spi, xfer))
rs->use_dma = 1;
- rockchip_spi_prepare_dma(rs);
- } else {
+ else
rs->use_dma = 0;
- }
rockchip_spi_config(rs);
- if (!rs->use_dma)
+ if (rs->use_dma) {
+ if (rs->tmode == CR0_XFM_RO) {
+ /* rx: dma must be prepared first */
+ rockchip_spi_prepare_dma(rs);
+ spi_enable_chip(rs, 1);
+ } else {
+ /* tx or tr: spi must be enabled first */
+ spi_enable_chip(rs, 1);
+ rockchip_spi_prepare_dma(rs);
+ }
+ } else {
+ spi_enable_chip(rs, 1);
ret = rockchip_spi_pio_transfer(rs);
+ }
return ret;
}
--
1.8.3.2
More information about the Linux-rockchip
mailing list