[PATCH v3 3/3] ARM: dts: rk3288: add VOP iommu nodes

[Daniel Kurtz]

On Tue, Oct 14, 2014 at 6:33 AM, Heiko Stübner <heiko at sntech.de> wrote:
> Hi Daniel,
>
> Am Samstag, 11. Oktober 2014, 02:30:48 schrieb Daniel Kurtz:
>> Add device nodes for the VOP iommus.
>> Device nodes for other iommus will be added in later patches.
>>
>> The iommu nodes use the #iommu-cells property as described in:
>>   Documentation/devicetree/bindings/iommu/iommu.txt
>>
>> Signed-off-by: Daniel Kurtz <djkurtz at chromium.org>
>> Signed-off-by: Simon Xue <xxm at rock-chips.com>
>> ---
>>  arch/arm/boot/dts/rk3288.dtsi | 18 ++++++++++++++++++
>>  1 file changed, 18 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
>> index 5950b0a..cbc92fa 100644
>> --- a/arch/arm/boot/dts/rk3288.dtsi
>> +++ b/arch/arm/boot/dts/rk3288.dtsi
>> @@ -271,6 +271,24 @@
>>               status = "disabled";
>>       };
>>
>> +     vopb_mmu: iommu at 0xff930300 {
>
> please use the address without the 0x here ... iommu at ff930300

I've been doing it wrong for a while and no one else noticed :-).  Thanks!
I will resend.

> Thanks
> Heiko
>
>> +             compatible = "rockchip,iommu";
>> +             reg = <0xff930300 0x100>;
>> +             interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
>> +             interrupt-names = "vopb_mmu";
>> +             #iommu-cells = <0>;
>> +             status = "disabled";
>> +     };
>> +
>> +     vopl_mmu: iommu at 0xff940300 {
>> +             compatible = "rockchip,iommu";
>> +             reg = <0xff940300 0x100>;
>> +             interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
>> +             interrupt-names = "vopl_mmu";
>> +             #iommu-cells = <0>;
>> +             status = "disabled";
>> +     };
>> +
>>       gic: interrupt-controller at ffc01000 {
>>               compatible = "arm,gic-400";
>>               interrupt-controller;
>