[PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
Kever Yang
kever.yang at rock-chips.com
Mon Nov 10 04:49:30 PST 2014
Hi Julius,
On 11/07/2014 06:11 AM, Julius Werner wrote:
> On Wed, Nov 5, 2014 at 5:30 PM, Kever Yang <kever.yang at rock-chips.com> wrote:
>> Hcd controller needs bus_suspend/resume, dwc2 controller make
>> root hub generate suspend/resume signal with hprt0 register
>> when work in host mode.
>> After the root hub enter suspend, we can make controller enter
>> low power state with PCGCTL register.
> You say you do this, but I don't actually see you doing it (for the
> not-connected case)?
Agree to add PCGCTL operation for the not-connected case.
>
>> We also update the lx_state for hsotg state.
>>
>> This patch has tested on rk3288 with suspend/resume.
>>
>> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
>> ---
>>
>> Changes in v2:
>> - update commit message
>> - make dwc2 suspend/resume sourcecode work
>>
>> drivers/usb/dwc2/hcd.c | 78 +++++++++++++++++++++++++++++++++++++++++++-------
>> 1 file changed, 67 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
>> index 0a0e6f0..01a415b 100644
>> --- a/drivers/usb/dwc2/hcd.c
>> +++ b/drivers/usb/dwc2/hcd.c
>> @@ -1471,6 +1471,30 @@ static void dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
>> }
>> }
>>
>> +static void dwc2_port_resume(struct dwc2_hsotg *hsotg)
>> +{
>> + u32 hprt0;
>> +
>> + /* After clear the Stop PHY clock bit, we should wait for a moment
>> + * for PLL work stable with clock output.
>> + */
>> + writel(0, hsotg->regs + PCGCTL);
>> + usleep_range(2000, 4000);
>> +
>> + hprt0 = dwc2_read_hprt0(hsotg);
>> + hprt0 |= HPRT0_RES;
>> + writel(hprt0, hsotg->regs + HPRT0);
>> + hprt0 &= ~HPRT0_SUSP;
>> + /* according to USB2.0 Spec 7.1.7.7, the host must send the resume
>> + * signal for at least 20ms
>> + */
>> + usleep_range(20000, 25000);
>> +
>> + hprt0 &= ~HPRT0_RES;
>> + writel(hprt0, hsotg->regs + HPRT0);
>> + hsotg->lx_state = DWC2_L0;
>> +}
>> +
>> /* Handles hub class-specific requests */
>> static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
>> u16 wvalue, u16 windex, char *buf, u16 wlength)
>> @@ -1516,17 +1540,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
>> case USB_PORT_FEAT_SUSPEND:
>> dev_dbg(hsotg->dev,
>> "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
>> - writel(0, hsotg->regs + PCGCTL);
>> - usleep_range(20000, 40000);
>> -
>> - hprt0 = dwc2_read_hprt0(hsotg);
>> - hprt0 |= HPRT0_RES;
>> - writel(hprt0, hsotg->regs + HPRT0);
>> - hprt0 &= ~HPRT0_SUSP;
>> - usleep_range(100000, 150000);
>> -
>> - hprt0 &= ~HPRT0_RES;
>> - writel(hprt0, hsotg->regs + HPRT0);
> I'm curious why this didn't change lx_state back to DWC2_L0 before...
> Paul, do you know?
>
>> + dwc2_port_resume(hsotg);
>> break;
>>
>> case USB_PORT_FEAT_POWER:
>> @@ -2299,6 +2313,44 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd)
>> usleep_range(1000, 3000);
>> }
>>
>> +static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
>> +{
>> + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
>> + u32 hprt0;
>> +
>> + if (!((hsotg->op_state == OTG_STATE_B_HOST) ||
>> + (hsotg->op_state == OTG_STATE_A_HOST)))
>> + return 0;
>> +
>> + if (hsotg->lx_state != DWC2_L0)
> What if the port is in L1 state? I don't think the driver supports LPM
> right now, but the DWC2_L1 enum is defined so it may one day in the
> future. Let's maybe at least add a TODO.
Added
>
>> + return 0;
> In your original ChromiumOS version of this patch, you also set
> PCGCTL_STOPPCLK here if the port was not connected. Is there a reason
> that changed (does it not actually save power or something)?
>
>> +
>> + hprt0 = dwc2_read_hprt0(hsotg);
>> + if (hprt0 & HPRT0_CONNSTS)
>> + dwc2_port_suspend(hsotg, 1);
> The contract for bus_suspend() is that it will suspend all ports not
> yet suspended, keep track of those ports and then only resume those in
> bus_resume() (compare, for example, how XHCI keeps track of that with
> xhci_bus_state.bus_suspended in xhci_bus_suspend/resume()). So you
> need something here to remember whether this function suspended the
> port or whether it had already been suspended, and then only resume
> the port in bus_resume() in the former case.
In fact, the dwc2 controller only support one port, so the hprt0
is the only one port we need to care.
> Note that
> dwc2_port_suspend() changes lx_state to DWC_L2 (at least in the
> version I'm looking at right now), so you can't just rely on that
> unless you explicitly set it back to something else here.
>
>> +
>> + return 0;
>> +}
>> +
>> +static int _dwc2_hcd_resume(struct usb_hcd *hcd)
>> +{
>> + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
>> + u32 hprt0;
>> +
>> + if (!((hsotg->op_state == OTG_STATE_B_HOST) ||
>> + (hsotg->op_state == OTG_STATE_A_HOST)))
>> + return 0;
>> +
>> + if (hsotg->lx_state != DWC2_L2)
>> + return 0;
>> +
>> + hprt0 = dwc2_read_hprt0(hsotg);
>> + if ((hprt0 & HPRT0_CONNSTS) && (hprt0 & HPRT0_SUSP))
>> + dwc2_port_resume(hsotg);
>> +
>> + return 0;
>> +}
>> +
>> /* Returns the current frame number */
>> static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd)
>> {
>> @@ -2669,6 +2721,10 @@ static struct hc_driver dwc2_hc_driver = {
>> .hub_status_data = _dwc2_hcd_hub_status_data,
>> .hub_control = _dwc2_hcd_hub_control,
>> .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete,
>> +#ifdef CONFIG_PM
>> + .bus_suspend = _dwc2_hcd_suspend,
>> + .bus_resume = _dwc2_hcd_resume,
>> +#endif
>> };
>>
>> /*
>> --
>> 1.9.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
>
>
More information about the Linux-rockchip
mailing list