[PATCH V5 7/7] dt-bindings: add document for dw-hdmi

[Zubair Lutfullah Kakakhel]

On 10/11/14 09:44, Andy Yan wrote:
> Hi ZubairLK
> On 2014年11月10日 17:17, Zubair Lutfullah Kakakhel wrote:
>> Nice work.
>>
>> This patch should move the binding from
>>
>> Documentation/devicetree/bindings/staging/imx-drm/hdmi.txt
>> to the location instead of making a new file and leaving the old
>> one in place.
>>
>> And use git format-patch -M to highlight any changes.
>>
>> Regards
>> ZubairLK
>    I add these bindings for dw-hdmi core, because
>   properities like reg, interrupts, ddc-i2c-bus, reg-io-width are used
>   by dw-hdmi core, but properities like compatible, gpr,clk, are platform
>   specific , they are handled by the platform code like dw_hdmi-imx.c
>   and described in platform specific dt binds like /imx-drm/hdmi.txt

I understand. 

Are there any changes to imx-drm/hdmi.txt?

Some properties for imx-drm/hdmi.txt would become optional/inherited from the parent hdmi drm binding?

The changes should be highlighted in the commit message. Or we'll
be confused which is which..

ZubairLK

>> On 08/11/14 05:32, Andy Yan wrote:
>>> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
>>> ---
>>>   .../devicetree/bindings/drm/bridge/dw-hdmi.txt     | 38 ++++++++++++++++++++++
>>>   1 file changed, 38 insertions(+)
>>>   create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt b/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
>>> new file mode 100644
>>> index 0000000..aa7ed17
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
>>> @@ -0,0 +1,38 @@
>>> +DesignWare HDMI bridge bindings
>>> +
>>> +Required properities:
>>> +- compatibel: platform specific such as "fsl,imx6q-hdmi","fsl,imx6dl-hdmi"

spellcheck. compatible

>>> +          "rockchip,rk3288-dw-hdmi"
>>> +- reg: physical base address of the controller and length
>>> +- ddc-i2c-bus: the ddc i2c bus
>>> +- interrupts: The interrupt number to the cpu
>>> +
>>> +Optional properties
>>> +- reg-io-width: the width of the reg:1,4, default set to 1 if not present
>>> +
>>> +Example:
>>> +    hdmi: hdmi at 0120000 {
>>> +        compatible = "fsl,imx6q-hdmi";
>>> +        reg = <0x00120000 0x9000>;
>>> +        interrupts = <0 115 0x04>;
>>> +        gpr = <&gpr>;
>>> +        clocks = <&clks 123>, <&clks 124>;
>>> +        clock-names = "iahb", "isfr";
>>> +        ddc-i2c-bus = <&i2c2>;
>>> +
>>> +        port at 0 {
>>> +            reg = <0>;
>>> +
>>> +            hdmi_mux_0: endpoint {
>>> +                remote-endpoint = <&ipu1_di0_hdmi>;
>>> +            };
>>> +        };
>>> +
>>> +        port at 1 {
>>> +            reg = <1>;
>>> +
>>> +            hdmi_mux_1: endpoint {
>>> +                remote-endpoint = <&ipu1_di1_hdmi>;
>>> +            };
>>> +        };
>>> +    };
>>>
>>
>>
> 
>