[PATCH V2 0/2] make imx hdmi publicly used by dw hdmi compatible platform

[Andy Yan]

We found freescale imx6 and rockchip rk3288 and Ingenic JZ4780 (Xburst/MIPS)
use the interface compatible Designware HDMI IP, but they also have some
lightly difference, such as phy pll configuration, register width(imx hdmi
register is one byte, but rk3288 is 4 bytes width and can only access by word),
4K support(imx6 doesn't support 4k, but rk3288 does).

To reuse the imx-hdmi driver, we do this patch set:
patch (1): split out imx-soc code from imx-hdmi to dw_hdmi-imx.c
patch (2): move imx-hdmi to bridge/, and rename to dw-hdmi to
make this driver indepent of drm-imx . And we will add rockchip
platform specific code dw_hdmi-rockchip.c later, this is depend
on drm-rockchip.

Changes in V2:
- use git format-patch -M to generate these patch
- remove change-id
- remove from

Andy Yan (2):
  imx-drm: imx-hdmi: split imx soc specific code from imx-hdmi
  move imx-hdmi to bridge/dw-hdmi

 drivers/gpu/drm/bridge/Kconfig                     |   5 +
 drivers/gpu/drm/bridge/Makefile                    |   1 +
 .../imx-hdmi.c => gpu/drm/bridge/dw_hdmi.c}        | 964 +++++++++------------
 .../imx-hdmi.h => gpu/drm/bridge/dw_hdmi.h}        |   0
 drivers/staging/imx-drm/Kconfig                    |   1 +
 drivers/staging/imx-drm/Makefile                   |   2 +-
 drivers/staging/imx-drm/dw_hdmi-imx.c              | 214 +++++
 include/drm/bridge/dw_hdmi.h                       | 114 +++
 8 files changed, 760 insertions(+), 541 deletions(-)
 rename drivers/{staging/imx-drm/imx-hdmi.c => gpu/drm/bridge/dw_hdmi.c} (57%)
 rename drivers/{staging/imx-drm/imx-hdmi.h => gpu/drm/bridge/dw_hdmi.h} (100%)
 create mode 100644 drivers/staging/imx-drm/dw_hdmi-imx.c
 create mode 100644 include/drm/bridge/dw_hdmi.h

-- 
1.9.1