[PATCH v2] kexec: Select ima_get/free_kexec_buffer() with CONFIG_HAVE_IMA_KEXEC(_OF)
Srish Srinivasan
ssrish at linux.ibm.com
Thu Oct 22 06:13:36 PDT 2026
On 10/20/26 2:07 PM, Roberto Sassu wrote:
> From: Roberto Sassu <roberto.sassu at huawei.com>
>
> On x86, if CONFIG_OF_FLATTREE is enabled, the kernel uses the device tree
> implementation of ima_get/free_kexec_buffer(). However, x86 passes the IMA
> buffer location through setup_data, not through the device tree, so the
> buffer is never found and the IMA measurement list is not carried over
> across kexec.
>
> Introduce CONFIG_HAVE_IMA_KEXEC_OF (which selects CONFIG_HAVE_IMA_KEXEC)
> and select it for the architectures that pass the IMA buffer location
> through the device tree, via of_kexec_alloc_and_setup_fdt() (arm64,
> powerpc and riscv). Build the device tree implementation of
> ima_get/free_kexec_buffer() only if the new option is enabled.
>
> Select the new option also on LoongArch, to preserve the current behavior
> and avoid a link failure. LoongArch does not pass the buffer location to
> the next kernel yet; this will be addressed separately.
>
> Finally, don't select it for x86, and use x86's own setup_data-based
> implementation regardless of CONFIG_OF_FLATTREE.
>
> Fixes: b69a2afd5afc ("x86/kexec: Carry forward IMA measurement log on kexec")
> Signed-off-by: Roberto Sassu <roberto.sassu at huawei.com>
Tested-by: Srish Srinivasan <ssrish at linux.ibm.com> # PowerVM
> ---
>
> v2:
> - Reworded the commit message (no code changes), suggested by Mimi
>
> arch/arm64/Kconfig | 2 +-
> arch/loongarch/Kconfig | 2 +-
> arch/powerpc/Kconfig | 2 +-
> arch/riscv/Kconfig | 2 +-
> arch/x86/kernel/setup.c | 2 +-
> drivers/of/kexec.c | 4 ++--
> kernel/Kconfig.kexec | 4 ++++
> 7 files changed, 11 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index b5a51b0ef944..4b7e248b6c91 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -1697,7 +1697,7 @@ config ARCH_SUPPORTS_KEXEC_FILE
> config ARCH_SELECTS_KEXEC_FILE
> def_bool y
> depends on KEXEC_FILE
> - select HAVE_IMA_KEXEC if IMA
> + select HAVE_IMA_KEXEC_OF if IMA
>
> config ARCH_SUPPORTS_KEXEC_SIG
> def_bool y
> diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
> index 2067d1f2ad7a..b5420d482da4 100644
> --- a/arch/loongarch/Kconfig
> +++ b/arch/loongarch/Kconfig
> @@ -690,7 +690,7 @@ config ARCH_SELECTS_KEXEC_FILE
> depends on KEXEC_FILE
> select KEXEC_ELF
> select RELOCATABLE
> - select HAVE_IMA_KEXEC if IMA
> + select HAVE_IMA_KEXEC_OF if IMA
>
> config ARCH_SUPPORTS_CRASH_DUMP
> def_bool 64BIT
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 2580e27e4328..096c6061893b 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -643,7 +643,7 @@ config ARCH_SELECTS_KEXEC_FILE
> def_bool y
> depends on KEXEC_FILE
> select KEXEC_ELF
> - select HAVE_IMA_KEXEC if IMA
> + select HAVE_IMA_KEXEC_OF if IMA
>
> config PPC64_BIG_ENDIAN_ELF_ABI_V2
> # Option is available to BFD, but LLD does not support ELFv1 so this is
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index f8e26c4bed2b..161bf8a65beb 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -1118,7 +1118,7 @@ config ARCH_SUPPORTS_KEXEC_FILE
> config ARCH_SELECTS_KEXEC_FILE
> def_bool y
> depends on KEXEC_FILE
> - select HAVE_IMA_KEXEC if IMA
> + select HAVE_IMA_KEXEC_OF if IMA
> select KEXEC_ELF
>
> config ARCH_SUPPORTS_KEXEC_PURGATORY
> diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
> index cda6adb9f69c..bc17e353c099 100644
> --- a/arch/x86/kernel/setup.c
> +++ b/arch/x86/kernel/setup.c
> @@ -421,7 +421,7 @@ static void __init add_early_ima_buffer(u64 phys_addr)
> #endif
> }
>
> -#if defined(CONFIG_HAVE_IMA_KEXEC) && !defined(CONFIG_OF_FLATTREE)
> +#ifdef CONFIG_HAVE_IMA_KEXEC
> int __init ima_free_kexec_buffer(void)
> {
> if (!ima_kexec_buffer_size)
> diff --git a/drivers/of/kexec.c b/drivers/of/kexec.c
> index 029903b986cb..724f29fef0c0 100644
> --- a/drivers/of/kexec.c
> +++ b/drivers/of/kexec.c
> @@ -116,7 +116,7 @@ static int do_get_kexec_buffer(const void *prop, int len, unsigned long *addr,
> return 0;
> }
>
> -#ifdef CONFIG_HAVE_IMA_KEXEC
> +#ifdef CONFIG_HAVE_IMA_KEXEC_OF
> /**
> * ima_get_kexec_buffer - get IMA buffer from the previous kernel
> * @addr: On successful return, set to point to the buffer contents.
> @@ -196,7 +196,7 @@ static void remove_ima_buffer(void *fdt, int chosen_node)
> size_t size;
> const void *prop;
>
> - if (!IS_ENABLED(CONFIG_HAVE_IMA_KEXEC))
> + if (!IS_ENABLED(CONFIG_HAVE_IMA_KEXEC_OF))
> return;
>
> prop = fdt_getprop(fdt, chosen_node, "linux,ima-kexec-buffer", &len);
> diff --git a/kernel/Kconfig.kexec b/kernel/Kconfig.kexec
> index 15632358bcf7..c6ed60f04ea4 100644
> --- a/kernel/Kconfig.kexec
> +++ b/kernel/Kconfig.kexec
> @@ -17,6 +17,10 @@ config KEXEC_ELF
> config HAVE_IMA_KEXEC
> bool
>
> +config HAVE_IMA_KEXEC_OF
> + bool
> + select HAVE_IMA_KEXEC
> +
> config KEXEC
> bool "Enable kexec system call"
> depends on ARCH_SUPPORTS_KEXEC
More information about the linux-riscv
mailing list