[PATCH 0/3] Add SG2044 eFUSE driver

[Inochi Amaoto]

Add SG2044 eFUSE driver, The eFUSE contains factory-programmed data,
and it will be auto loaded into shadow registers while startup. So
only MMIO read is needed.

Inochi Amaoto (3):
  dt-bindings: nvmem: Add SG2044 eFuse controller
  nvmem: Add Sophgo SG2044 eFuse driver
  riscv: dts: sophgo: sg2044: Add eFUSE device

 .../bindings/nvmem/sophgo,efuse.yaml          |  61 ++++++
 .../boot/dts/sophgo/sg2044-sophgo-srd3-10.dts |   4 +
 arch/riscv/boot/dts/sophgo/sg2044.dtsi        |  12 ++
 drivers/nvmem/Kconfig                         |  12 ++
 drivers/nvmem/Makefile                        |   2 +
 drivers/nvmem/sophgo-efuse.c                  | 177 ++++++++++++++++++
 6 files changed, 268 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/nvmem/sophgo,efuse.yaml
 create mode 100644 drivers/nvmem/sophgo-efuse.c

--
2.56.0